Starter problem

yawns

Did you run npm install in the MMM-WienerLinien folder?

kurt

@yawns
no ! how can I do this?

in_a_days

@kurt

From a new terminal session:

cd MagicMirror/modules/MMM-WienerLinien

npm install

kurt

@in_a_days
the installation went well, but when I try to reboot the booting logo appears shortly, but thats it.
But into the MM folder there are two config folder now, one .config and one config
Either I didn’t recogbize that bevor, or one is new.

in_a_days

@kurt

Just wanted to check in. I tried to copy the config.js you posted and I had some problems as well. I’m a bit busy today, but I have some ideas and if you’re still stuck I’ll try to have a solution for you tomorrow. :)

kurt

Hallo
Has somebody an idea to help?
The internet connection is fine, cause the rss from the Ney York Times is shown.
Thank you in advance
kurt

> magicmirror@2.1.0 start /home/pi/MagicMirror
> electron js/electron.js

Starting MagicMirror: v2.1.0
Loading config ...
Loading module helpers ...
No helper found for module: alert.
Initializing new module helper ...
No helper found for module: clock.
Initializing new module helper ...
No helper found for module: compliments.
No helper found for module: currentweather.
No helper found for module: weatherforecast.
Initializing new module helper ...
All module helpers loaded.
Starting server op port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Connecting socket for: calendar
Starting node helper for: calendar
Connecting socket for: newsfeed
Starting module: newsfeed
Sockets connected & modules started ...
Whoops! There was an uncaught exception...
{ Error: listen EADDRINUSE :::8080
    at Object.exports._errnoException (util.js:1026:11)
    at exports._exceptionWithHostPort (util.js:1049:20)
    at Server._listen2 (net.js:1253:14)
    at listen (net.js:1289:10)
    at net.js:1399:9
    at _combinedTickCallback (internal/process/next_tick.js:77:11)
    at process._tickCallback (internal/process/next_tick.js:98:9)
    at Module.runMain (module.js:592:11)
    at run (bootstrap_node.js:402:7)
    at startup (bootstrap_node.js:157:9)
  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '::',
  port: 8080 }
MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
Launching application.

Note from admin: Please use Markdown on code snippets for easier reading!

strawberry 3.141

@kurt this means probably that there is already an instance of magicmirror running on your pi because the port is already used

kurt

@strawberry-3.141
Thank you strawberry, but how about this now?

pi@raspberrypi:~ $ DISPLAY=:0 npm start
npm ERR! Linux 4.4.38-v7+
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "start"
npm ERR! node v6.9.4
npm ERR! npm  v3.10.10
npm ERR! path /home/pi/package.json
npm ERR! code ENOENT
npm ERR! errno -2
npm ERR! syscall open

npm ERR! enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm ERR! enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm ERR! enoent This is most likely not a problem with npm itself
npm ERR! enoent and is related to npm not being able to find a file.
npm ERR! enoent 

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/npm-debug.log

Note from admin: Please use Markdown on code snippets for easier reading!

strawberry 3.141

@kurt you are in the wrong directory again :D

cd ~MagicMirror first

kurt

@strawberry-3.141
Sorry , but now get the starting logo with the" Please create a config file"
Thank you

pi@raspberrypi:~ $ cd ~/MagicMirror 
pi@raspberrypi:~/MagicMirror $ DISPLAY=:0 npm start

> magicmirror@2.1.0 start /home/pi/MagicMirror
> electron js/electron.js

Starting MagicMirror: v2.1.0
Loading config ...
WARNING! Could not find config file. Please create one. Starting with default configuration.
Loading module helpers ...
Initializing new module helper ...
No helper found for module: helloworld.
All module helpers loaded.
Starting server op port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Sockets connected & modules started ...
Launching application.

Note from admin: Please use Markdown on code snippets for easier reading!

strawberry 3.141

@kurt are you sure you have a config file in /home/pi/MagicMirror/config

kurt

@strawberry-3.141 I’m allready working on that mistake.
you a right, don’t know who took this fike from that place.
Change the config, file and place over there.
Mystery…
Thanks
Kurt

kurt

@strawberry-3.141
I’m working with File Zilla to transfer the files.
By now I guess he the one who makes the config folder dissapear. Have you ever heard of something like that? or can you recommend an other tool to upload files? I tried Cyberduck, but won’t work.
Thanks

strawberry 3.141

@kurt im using filezilla or an usb stick

kurt

@strawberry-3.141
Anyway, I copied the folder again to the pi.
calender, changed compliments and newsfeed appear.
Do you have an idea, why the weather and the forecast dont show?
Thanks

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 */

var config = {
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"],

	language: 'de',
	timeFormat: 24,
	units: 'metric',

	modules: [
		{
			module: 'alert',
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: 'clock',
			position: 'top_left'
		},
		{
			module: 'calendar',
			header: 'US Holidays',
			position: 'top_left',
			config: {
				calendars: [
					{
						symbol: 'calendar-check-o ',
						url: 'webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics'
					}
				]
			}
		},
		{
			module: 'compliments',
			position: 'lower_third'
		},
		{
			module: 'currentweather',
			position: 'top_right',
			config: {
				location: 'Vienna',
				locationID: '2761369',  //ID from http://www.openweathermap.org
				appid: 'xxxxxxxxxxxxxxxxxx'
			}
		},
		{
			module: 'weatherforecast',
			position: 'top_right',
			header: 'Das Wetter',
			config: {
				location: 'Vienna',
				locationID: '2761369',  //ID from http://www.openweathermap.org
				appid: 'xxxxxxxxxxxxxxxxx'
			}
		},
		{
			module: 'newsfeed',
			position: 'bottom_bar',
			config: {
				feeds: [
					{
						title: "Der Standard",
						url: "http://derStandard.at/?page=rss&ressort=Seite1"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
	]

};

Note from admin: Please use Markdown on code snippets for easier reading!

strawberry 3.141

@kurt do you get any errors in the terminal, maybe your api key is incorrect etc.

kurt

@strawberry-3.141 Thank you for todays help, can’t find the reason,
and no, I get no messages.
Thanks a lot

kurt

@in_a_days
Thank’s a lot for your help, but strawberry allready repaired my mistakes, so by now i’m fine, just thinking about what is the best way to save such a running system, so I can go back when things go wrong and I found out things go very quick wrong :)
So have a nice day and Thank you

yawns

@kurt
I would create an archive of the entire magicmirror folder.

cd ~
tar -cvf mirror.tar /MagicMirror

kurt

@yawns
this is on the Raspi and on which place will he make the archiv ?
And to save it outside the best way is? I#m using Filzilla is this a right tool for this plan?
Thanks