Difficulty getting MMM-Transitfeed working

[sdetweil]

@UncleRoger and when the electron-rebuild ran it should have said
something about sqllite
and rebuild complete, like mine above

[UncleRoger]

@sdetweil

Nothing about sqlite but it did say “Rebuild Complete”:

pi@MagicMirrorDev:~/MagicMirror $ {
  cd ~/MagicMirror
  npm install @electron/rebuild
  cd ~/MagicMirror/modules/MMM-transitfeed
  ../../node_modules/.bin/electron-rebuild
  cd ~/MagicMirror
}

added 81 packages in 11s

253 packages are looking for funding
  run `npm fund` for details
✔ Rebuild Complete
pi@MagicMirrorDev:~/MagicMirror $ 

This time around, I didn’t do the sqlite update:

{
  cd ~/MagicMirror
  rm -r node_modules/better-sqlite3/
  npm install better-sqlite3 --build-from-source --runtime=electron --target=26.4.3 --dist-url=https://electronjs.org/headers --force
}

But I don’t think it worked any better when I did. I’ll try that and then do the rebuild.

[sdetweil]

@UncleRoger don’t install sql again, else you have to rebuild again

[UncleRoger]

@sdetweil

Oops. I did the rebuild again. Still doesn’t say anything about the sqlite3 but it does say rebuild complete.

Thanks

[sdetweil]

@UncleRoger and? does it run.

[UncleRoger]

@sdetweil

Sadly, no. Same error.

[UncleRoger]

Could it be hardware related? I’m not sure I have another Pi4 I can test with but I’ve got a Pi Zero 2 I could try. Would that be of any use?

[sdetweil]

@UncleRoger its not hardware, but another try wouldn’t hurt

[UncleRoger]

@sdetweil

There is no joy in mudville.

Here’s what I did with a fresh install of PiOS (Raspberry Pi 4 2gb):

pi@MagicMirrorDev:~/MagicMirror $ history
    1  {   sudo apt update;   sudo apt full-upgrade; }
    2  bash -c  "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)"
    3  sudo nmtui
    4  sudo shutdown -r now
    5  sudo nmtui
    6  sudu shutdown -r now
    7  sudo shutdown -r now
    8  {   cd ~/MagicMirror/modules;   git clone https://github.com/bnitkin/MMM-transitfeed.git; }
    9  cd ..
   10  {   cd ~/MagicMirror                     # Enter magicmirror project directory
           npm uninstall gtfs-realtime-bindings # Now part of gtfs
           npm install gtfs --save-dev          # Force update to latest version
       }
   11  {   cd ~/MagicMirror                     # Enter magicmirror project directory
           npm uninstall gtfs-realtime-bindings # Now part of gtfs
           npm install gtfs --save-dev          # Force update to latest version
       }
   12  {   sudo npm install -g n;   sudo n lts;   sudo n latest;   sudo n prune; }
   13  {   cd ~/MagicMirror                     # Enter magicmirror project directory
           npm uninstall gtfs-realtime-bindings # Now part of gtfs
           npm install gtfs --save-dev          # Force update to latest version
       }
   14  cd $HOME/MagicMirror;
   15  DISPLAY=:0 npm start
   16  npm run config:check
   17  DISPLAY=:0 npm start
   18  npm run config:check
   19  DISPLAY=:0 npm start
   20  npm run config:check
   21  DISPLAY=:0 npm start
   22  {   cd ~/MagicMirror;   rm -r node_modules/better-sqlite3/;   npm install better-sqlite3 --build-from-source --runtime=electron --target=26.4.3 --dist-url=https://electronjs.org/headers --force; }
   23  {   cd ~/MagicMirror;   npm install @electron/rebuild; }
   24  {   cd ~/MagicMirror/modules/MMM-transitfeed;   ../../node_modules/.bin/electron-rebuild;   cd ~/MagicMirror; }
   25  DISPLAY=:0 npm start
   26  history
pi@MagicMirrorDev:~/MagicMirror $

The nmtui stuff is to set the IP address (which I did wrong a couple of times) and then I mucked up the config.js putting in the transitfeed module stuff.

Here’s the log from trying to run it at the end (it’s basically the same):

[2024-06-25 11:53:08.617] [LOG]   MMM-transitfeed: Importing with [object Object]
[2024-06-25 11:53:08.649] [ERROR] (node:3464) UnhandledPromiseRejectionWarning: Error: The module '/home/pi/MagicMirror/node_modules/better-sqlite3/build/Release/better_sqlite3.node'
was compiled against a different Node.js version using
NODE_MODULE_VERSION 116. This version of Node.js requires
NODE_MODULE_VERSION 121. Please try re-compiling or re-installing
the module (for instance, using `npm rebuild` or `npm install`).
    at process.func [as dlopen] (node:electron/js2c/node_init:2:2214)
    at Module._extensions..node (node:internal/modules/cjs/loader:1343:18)
    at Object.func [as .node] (node:electron/js2c/node_init:2:2214)
    at Module.load (node:internal/modules/cjs/loader:1098:32)
    at Module._load (node:internal/modules/cjs/loader:945:12)
    at c._load (node:electron/js2c/node_init:2:13672)
    at Module.require (node:internal/modules/cjs/loader:1122:19)
    at require (node:internal/modules/helpers:130:18)
    at bindings (/home/pi/MagicMirror/node_modules/bindings/bindings.js:112:48)
    at new Database (/home/pi/MagicMirror/node_modules/better-sqlite3/lib/database.js:48:64)
    at setupDb (file:///home/pi/MagicMirror/node_modules/gtfs/lib/db.js:10:14)
    at openDb (file:///home/pi/MagicMirror/node_modules/gtfs/lib/db.js:31:12)
    at Module.importGtfs (file:///home/pi/MagicMirror/node_modules/gtfs/lib/import.js:676:16)
    at Class.startup (/home/pi/MagicMirror/modules/MMM-transitfeed/node_helper.js:48:29)
    at async Class.socketNotificationReceived (/home/pi/MagicMirror/modules/MMM-transitfeed/node_helper.js:33:52)
(Use `electron --trace-warnings ...` to show where the warning was created)
[2024-06-25 11:53:08.650] [ERROR] (node:3464) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). To terminate the node process on unhandled promise rejection, use the CLI flag `--unhandled-rejections=strict` (see https://nodejs.org/api/cli.html#cli_unhandled_rejections_mode). (rejection id: 8)

I’m thinking I might give it another go from scratch without worrying about the IP address and catching all the output from each command.

[UncleRoger]

@sdetweil

Could you check that I’m doing things correctly? These are the commands I’m using to get from a fresh OS to MM with transitfeed:

# Update system

{
  sudo apt update
  sudo apt full-upgrade
}

# Install MagicMirror

bash -c  "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)"

# NOTICE ON INSTALL: npm install -g npm@10.8.1

# update Node/NPM

{
  sudo npm install -g n
  sudo n lts
  sudo n latest
  sudo n prune
}

# Install transitfeed

{
  cd ~/MagicMirror/modules
  git clone https://github.com/bnitkin/MMM-transitfeed.git
}

# Install gtfs

{
  cd ~/MagicMirror                     # Enter magicmirror project directory
  npm uninstall gtfs-realtime-bindings # Now part of gtfs
  npm install gtfs --save-dev          # Force update to latest version
}

# Update better-sqlite3

{
  cd ~/MagicMirror
  rm -r node_modules/better-sqlite3/
  npm install better-sqlite3 --build-from-source --runtime=electron --target=26.4.3 --dist-url=https://electronjs.org/headers --force
}

# Rebuild Electron?

{
  cd ~/MagicMirror
  npm install @electron/rebuild
  cd ~/MagicMirror/modules/MMM-transitfeed
  ../../node_modules/.bin/electron-rebuild
  cd ~/MagicMirror
}

Thanks so much for your help!

[sdetweil]

@UncleRoger ok, simpler

flash sd card with
use my script to install MM (do nothing before, it does the update and adds whats needed for MM)
npm start to prove MagicMirror is working
clone the module

cd to the module folder and do the npm install and npm install gtfs (in module folder NOT MM folder!!)
npm install gtfs --save-dev

now, need electron rebuild
cd …/… # magicmirror folder
npm install @electron/rebuild
cd - # go back to module folder
…/…/node_modules/.bin/electron-rebuild
wait, should show sqlite
rebuild complete
cd - # back to MM folder

add the config entry for the module
npm start

should work

[UncleRoger]

@sdetweil

When you say “module folder”, you mean (in this case) ~/MagicMirror/modules/MMM-transitfeed not ~/MagicMirror/modules/ right? I’m pretty sure, but better safe than sorry.

Thanks!

[sdetweil]

@UncleRoger correct the module’s folder

[UncleRoger]

@sdetweil

Still no luck. 8^(

I was getting a bunch of errors during the MM install which some googling suggested might be due to insufficient power (which is odd because I was using a big power supply) so I switched to an RPi power supply and still got the same errors. So maybe they’re somehow related? The errors are:

During MM Install:

(node:27144) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit

During the Electron stuff:

(node:42678) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit

[sdetweil]

@UncleRoger it’s an npm bug, nothing fatal

did you see the rebuild messages?

[UncleRoger]

@sdetweil
It said “Rebuild Complete” but nothing about sqlite3.

[sdetweil]

@UncleRoger ok, let see if we can clean up and try again

so we are going to reset the MM loaded libs and the module loaded libs

cd ~/MagicMirror
rm -rf node_modules
git checkout package.json
git checkout package-lock.json
npm run install-mm

when finished

npm install @electron/rebuild

now the module

cd modules/MMM-Transitfeed
rm -rf node_modules
git checkout package.json
git checkout package-lock.json
npm install

when finished

npm install btfs

when finished

../../node_modules/.bin/electron-rebuild

[UncleRoger]

@sdetweil said in Difficulty getting MMM-Transitfeed working:

ok, let see if wee can clean up and try again

so we are going to reset the MM loaded libs and the module loaded libs

That worked! Yay!

Thank you so very much! I really appreciate all your help. You are truly amazing.

My next step is to figure out how to get to the same point with my actual dev system before making the same changes to the production system. That and how to get it to work with my local transit system’s feeds.

[sdetweil]

@UncleRoger said in Difficulty getting MMM-Transitfeed working:

My next step is to figure out how to get to the same point with my actual dev system before making the same changes to the production system.

well, you can follow the steps from

npm install @electron/rebuild
onward

or you can follow all those steps… won’t hurt anything

[sdetweil]

@UncleRoger said in Difficulty getting MMM-Transitfeed working:

how to get it to work with my local transit system’s feeds.

that I have no clue on…

is this closeable?