MMM-Remote-Control

rkorell

@sdetweil I’ve found V3.3.2 and just try "git checkout 1f451ce "

sdetweil

@rkorell if you pull the tags, you can use the tag name

git checkout v3.3.2

rkorell

@sdetweil
For some really strange reasons, neither

pi@MagicMirrorPi5:~/MagicMirror/modules/MMM-Remote-Control $ git fetch --all --tags
pi@MagicMirrorPi5:~/MagicMirror/modules/MMM-Remote-Control $ git fetch --tags

currently give any feedback…

So I’ve worked with the found git-hash:

git checkout 1f451ce

This at least worked and rolled back to V. 3.3.2.

Unfortunately some dependencies (package-lock.json ???) are not strict enough, so the rollback produces an error message:

[ERROR] Error when loading MMM-Remote-Control: require() of ES Module /home/pi/MagicMirror/modules/MMM-Remote-Control/node_modules/uuid/dist-node/index.js from /home/pi/MagicMirror/modules/MMM-Remote-Control/API/api.js not supported.

So I downgraded UUID:

cd ~/MagicMirror/modules/MMM-Remote-Control
npm install uuid@9.0.1
npm ci --omit=dev

With this module is running again.

From now on I’m in a in ‘detached HEAD’ state - but this seems OK.
Thanks for your time, effort and always great help!

Ralf

sdetweil

@rkorell I was just about to add that you needed to redo the npm install for the module after deleting the node_modules folder
else you were trying to run the new dependencies with the old code

but you fixed it…

rkorell

@sdetweil
Yes :-)

In fact I’ve used

npm ci --omit=dev

this does the deletion of the node_modules folder inherently AFAIK …

Thanks again, dear Sam!

Ralf

sdetweil

@rkorell said in MMM-Remote-Control:

npm ci

be careful… the package.json was built and tested on a cloud based virtual machine.
pi and other hardware types MAY need a different version of a dependency, i’ve only seen it myself twice in 6 years, but

npm ci uses the exact package.json
npm install will get the appropriate for this platform, even if the version changes.

anyhow… I use npm install --omit=dev when I do the installs script or MMM-Config

rkorell

@sdetweil
OK; thanks for this hint.
May npm install has avoided the resulting error which I had to solve…

Anyway: Thanks a LOT!
Regards,
Ralf

KristjanESPERANTO

Thanks for the feedback!

Since Sam has already addressed some of the issues, I won’t go into them again.

A few problems were mentioned, some of which I have just addressed with v4.1.0. E.g.:

Restart/Shutdown: Should now also work on systems without PM2.
Minimize: Now says “restart to restore” so you know how to undo it.

About the monitor control issue:

This would be tricky to get running by default everywhere because every system uses different commands (X11/Wayland/etc). You have to check the Monitor Control docs and configure the right commands for your specific setup - the defaults won’t work everywhere.

About the “npm install/npm ci” topic:

Yes, npm ci can be problematic for modules with native dependencies that need platform-specific builds. However, MMM-Remote-Control only uses pure JavaScript dependencies (marked, qrcode, simple-git, swagger-ui-dist, uuid) - no native modules that require compilation.

For this module, npm ci is actually the better choice because:

Guarantees exact tested versions which the developers released
Faster installation (no dependency resolution)
Same behavior in CI and production
No change on the package-lock.json

So the warning about npm ci is valid in general, but doesn’t apply here.

About the microupdates. Since the test suite does not a lot parts yet, some details simply go unnoticed after major changes. If you are not experiencing any problems with the module, you do not need to install every update.

About node update: I recommend using nvm for node updates. This is also what is offered as default for Linux on the official download page. This makes many things easier - like if something does not work after an update, you can easily switch back to the previous node version. So you don’t need to be so afraid of updates.

KristjanESPERANTO

@S374n said in MMM-Remote-Control:

First update changes my main.css - took me a while to figure it out and redo all my customizations.

You should not change main.css. All customizations should be made in custom.css: https://docs.magicmirror.builders/modules/customcss.html#custom-css

sdetweil

@KristjanESPERANTO n also allows you to change version on the fly.

One nvm ‘benefit’, it stores the node versions in the users home folder at .nvm

So, on a multi-user system each user could have different node versions.

As MagicMirror is deployed as only user, it’s functionally the same.

One n benefit, it stores the version in the /usr/ local folder
So it requires sudo to make the change, cannot be accidental

KristjanESPERANTO

@sdetweil said in MMM-Remote-Control:

So it requires sudo to make the change, …

This can also be seen as a disadvantage 🙂

sdetweil

@KristjanESPERANTO maybe, if you never use sudo, but we use it very often

meikelrix

@KristjanESPERANTO Hi, I very much like MMM-Remote-Control!

The last update has possibly introduced an error with respect to the “Custom Menu Items” => I have a menu item which still shows, but the sub menu items don’t show anymore?

Else wise please let me repeat: excellent job on MMM-Remote-Control!

meikelrix

said in MMM-Remote-Control:

@KristjanESPERANTO Hi, I very much like MMM-Remote-Control!

The last update has possibly introduced an error with respect to the “Custom Menu Items” => I have a menu item which still shows, but the sub menu items don’t show anymore?

Else wise please let me repeat: excellent job on MMM-Remote-Control!

FWIW: I’m using the showModuleApiMenu: true setting in config.js as well and the submenus there don’t show either, any more?

KristjanESPERANTO

@meikelrix I’ll take a look asap :-)

KristjanESPERANTO

@meikelrix Please check new release 4.1.1 🙂

meikelrix

@KristjanESPERANTO said in MMM-Remote-Control:

@meikelrix Please check new release 4.1.1 🙂

Thank you very much, that has fixed my custom menu!

On the other hand I still don’t see the content of “Modules Controls” menu, although “showModuleApiMenu: true” is set in config.js?

KristjanESPERANTO

@meikelrix Did you set showModuleApiMenu like this?

    {
      module: "MMM-Remote-Control",
      position: "bottom_right",
      config: {
        showModuleApiMenu: true,
      ....

Do you also have modules with recognizable notifications? Newsfeed is quite good for testing, for example.

Ekrankopio de 2026-01-04 15.42.13.png

If it doesn’t work, show me your config (without secrets of course).

meikelrix

@KristjanESPERANTO I did set the showModuleApiMenu: true,
I do get the “Module Controls” menu entry, but it has no content AND other notification based modules are working.
I noticed as well that the “Updates” doesn’t show modules, anymore. The only one shown is “MagicMirror”, below the message “!No module loaded.”

Ok, I renamed MMM-Remote-Contol directory and re-installed following the github instructions. All is working now!
Thank you for your help and a great module!

Snille

@KristjanESPERANTO
I have this problem that has been bugging me for a while…
Check this clip: https://photos.app.goo.gl/Zahc5xqttn33frbKA < From API

My mirror have lot’s of modules many are multi instances (like MMM-MotionEye in this example).
I see the same behavior (or similar) with other modules, mainly my “MMM-homeassistant-sensors”…
I often makes API-calls from Node Red in Home Assistant, like this clip: https://photos.app.goo.gl/K9ktuXGKawoyHEez5

Errors from the log:

0|mmdev  | [2026-01-05 12:24:13.812] [ERROR] undefined Error [ERR_HTTP_HEADERS_SENT]: Cannot set headers after they are sent to the client
0|mmdev  |     at ServerResponse.setHeader (node:_http_outgoing:700:11)
0|mmdev  |     at ServerResponse.header (/var/www/html/magicmirror/m/node_modules/express/lib/response.js:686:10)
0|mmdev  |     at ServerResponse.json (/var/www/html/magicmirror/m/node_modules/express/lib/response.js:249:10)
0|mmdev  |     at Class.sendResponse (/var/www/html/magicmirror/m/modules/MMM-Remote-Control/node_helper.js:687:28)
0|mmdev  |     at Class.handleSimpleSocketNotification (/var/www/html/magicmirror/m/modules/MMM-Remote-Control/node_helper.js:965:10)
0|mmdev  |     at SHOW (/var/www/html/magicmirror/m/modules/MMM-Remote-Control/node_helper.js:1024:28)
0|mmdev  |     at Class.executeQuery (/var/www/html/magicmirror/m/modules/MMM-Remote-Control/node_helper.js:1049:7)
0|mmdev  |     at Class.answerModuleApi (/var/www/html/magicmirror/m/modules/MMM-Remote-Control/API/api.js:442:14)
0|mmdev  |     at /var/www/html/magicmirror/m/modules/MMM-Remote-Control/API/api.js:299:14
0|mmdev  |     at Layer.handleRequest (/var/www/html/magicmirror/m/node_modules/router/lib/layer.js:152:17)
0|mmdev  |     at next (/var/www/html/magicmirror/m/node_modules/router/lib/route.js:157:13)
0|mmdev  |     at Route.dispatch (/var/www/html/magicmirror/m/node_modules/router/lib/route.js:117:3)
0|mmdev  |     at handle (/var/www/html/magicmirror/m/node_modules/router/index.js:435:11)
0|mmdev  |     at Layer.handleRequest (/var/www/html/magicmirror/m/node_modules/router/lib/layer.js:152:17)
0|mmdev  |     at /var/www/html/magicmirror/m/node_modules/router/index.js:295:15
0|mmdev  |     at param (/var/www/html/magicmirror/m/node_modules/router/index.js:600:14)
0|mmdev  | [2026-01-05 12:24:28.662] [ERROR] undefined Error [ERR_HTTP_HEADERS_SENT]: Cannot set headers after they are sent to the client
0|mmdev  |     at ServerResponse.setHeader (node:_http_outgoing:700:11)
0|mmdev  |     at ServerResponse.header (/var/www/html/magicmirror/m/node_modules/express/lib/response.js:686:10)
0|mmdev  |     at ServerResponse.send (/var/www/html/magicmirror/m/node_modules/express/lib/response.js:163:12)
0|mmdev  |     at ServerResponse.json (/var/www/html/magicmirror/m/node_modules/express/lib/response.js:252:15)
0|mmdev  |     at Class.sendResponse (/var/www/html/magicmirror/m/modules/MMM-Remote-Control/node_helper.js:687:28)
0|mmdev  |     at Class.handleSimpleSocketNotification (/var/www/html/magicmirror/m/modules/MMM-Remote-Control/node_helper.js:965:10)
0|mmdev  |     at HIDE (/var/www/html/magicmirror/m/modules/MMM-Remote-Control/node_helper.js:1023:28)
0|mmdev  |     at Class.executeQuery (/var/www/html/magicmirror/m/modules/MMM-Remote-Control/node_helper.js:1049:7)
0|mmdev  |     at Class.answerModuleApi (/var/www/html/magicmirror/m/modules/MMM-Remote-Control/API/api.js:442:14)
0|mmdev  |     at /var/www/html/magicmirror/m/modules/MMM-Remote-Control/API/api.js:299:14
0|mmdev  |     at Layer.handleRequest (/var/www/html/magicmirror/m/node_modules/router/lib/layer.js:152:17)
0|mmdev  |     at next (/var/www/html/magicmirror/m/node_modules/router/lib/route.js:157:13)
0|mmdev  |     at Route.dispatch (/var/www/html/magicmirror/m/node_modules/router/lib/route.js:117:3)
0|mmdev  |     at handle (/var/www/html/magicmirror/m/node_modules/router/index.js:435:11)
0|mmdev  |     at Layer.handleRequest (/var/www/html/magicmirror/m/node_modules/router/lib/layer.js:152:17)
0|mmdev  |     at /var/www/html/magicmirror/m/node_modules/router/index.js:295:15

I also experience that when calling a specific module to show with “module_number_modulename”, it often shows the “wrong” module-instance (of that type of module, like MMM-homeassistant-sensors, but the wrong one)… I don’t know if it’s related to this.

Let me know if you need anything more…
Thank you for this great module! :)