Read the statement by Michael Teeuw here.
What Monitor did you use?
-
Mhh that’s right :/ So it’s OLED I guess :D
-
Man those are expensive though …
-
@KirAsh4 yeah sadly… We will probably have to wait a few more years for that :(
-
-
I got this one for 200 euro in MediaMarkt:
http://tweakers.net/pricewatch/435115/lg-27mp37vq-b-zwart.html
It’s very thin - especially without the bezel (I think it’s 13mm at its thickest) and the control board is completely detachable and only slightly bigger than the Raspberry Pi. It was a very easy install. Only downside is that the HDMI cable comes straight out - the back they all seem to these days. I solved this with a 90 degree HDMI cable.
-
I can advise to use use ViewSonic!
e.g.:
https://www.amazon.de/gp/product/B00K6E8ACU/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
I used now two of them for both: it’s not too difficult to get rid of the bezel, they are very slim, and all connectors showing downbr!
-
I also used a ViewSonic, this 24 inch:
https://www.amazon.com/Viewsonic-VA2446M-LED-24-Inch-1080p-Monitor/dp/B00D601UC8
Like Eric said, the bezel came off fairly easily and it’s slim. Plus it’s only $129.99 right now! -
I used an Asus MB169B+ which is an external USB C monitor. It’s extremely thin, but I had to get a controller on eBay, since the included controller has only the USB-port (and uses DisplayLink).
-
@sero That’s a sexy monitor! :)
-
Would the iiyama ProLite X2483HSU-B2 be a good kandidate? Together with a 70% reflective 30% pass-through mirror?
Or are there better options on the market for a setup like this mirror (24 inch, with usb to power the pi).En voor de Nederlands sprekenden: hoe heet zo’n spiegel in het Nederlands (two-way mirror)
