Problem with ip whitelist

[ottobot]

@Cato I’m running it on a zero, so no pm2 sadly. I’m going to try another fresh install on another SD card on another zero when I get home from work today and see if I can reproduce it or if it’s just a weird hiccup.

[roramirez]

If you have troubles with range, IP, etc… Can set ipWhitelist: [] to allow all IP addresses.

Warning, this enables from everywhere (on your net) have access.

[Cato]

@roramirez Cool, didn’t know that! :)

[ottobot]

@roramirez Nice! Worked perfect. Thank you.

[Mykle1]

@roramirez said in Problem with ip whitelist:

Can set ipWhitelist: [] to allow all IP addresses.

For a novice like myself, that’s a whole lot easier than trying to figure this out:

ipWhitelist: ["::fff:0.0.0.0/1", "::fff:128.0.0.0/2", "::fff:192.0.0.0/3", 
			"::fff:224.0.0.0/4", "127.0.0.1", "::ffff:127.0.0.1", "::1"],

:clap_tone1:

[roramirez]

@Mykle1 Yes, It’s a problem I can see from a time ago. It’s difficult for some users understood rules /24 /32 /etc . I’m not saying “you go to hell because you not understand it” … generally to myself is hard identified what it is one or other. Every time I see https://en.wikipedia.org/wiki/IPv4_subnetting_reference ;)

I have proposed add a note
https://github.com/MichMich/MagicMirror/pull/759

In a future it should be by default.

[Mykle1]

@roramirez said in Problem with ip whitelist:

In a future it should be by default.

Good idea! BTW, you all do an excellent job here and I am very grateful. Thank you. :thumbsup_tone1: