Facial Recognition - customize your mirror for every user!

[reaper81]

I have read all posts in this thread. Is there realy no answer why the facerecognation in the testtool is so much better than in the MM-Module?

[j.e.f.f]

@paviro I had a hard time getting this to play nicely with modules that show and hide themselves. I created a pull-request that addresses this:

https://github.com/paviro/MMM-Facial-Recognition/pull/48

Basically I added a lockString config option to each show and hide command, and when combined with another module that also uses a lockString the particular module is only visible when both have removed their respective lock strings.

See here for details about visibility locking:
https://github.com/MichMich/MagicMirror/tree/develop/modules

cheers!

[reaper81]

hello everyone,

after update to the new version of the FR-Module i get this error-Massage while starting the MM.

Starting MagicMirror: v2.1.1
Loading config …
Loading module helpers …
No helper found for module: alert.
WARNING! Could not load config file. Starting with default configuration. Error found: Error: Cannot find module ‘node_helper’
Loading module helpers …
No helper found for module: alert.
App threw an error during load
Error: Cannot find module ‘node_helper’
at Module._resolveFilename (module.js:470:15)
at Function.Module._resolveFilename (/home/pi/MagicMirror/node_modules/electron/dist/resources/electron.asar/common/reset-search-paths.js:35:12)
at Function.Module._load (module.js:418:25)
at Module.require (module.js:498:17)
at require (internal/module.js:20:19)
at Object. (/home/pi/MagicMirror/modules/default/updatenotification/node_helper.js:6:18)
at Object. (/home/pi/MagicMirror/modules/default/updatenotification/node_helper.js:89:3)
at Module._compile (module.js:571:32)
at Object.Module._extensions…js (module.js:580:10)
at Module.load (module.js:488:32)
…

Can anybody help me?

[j.e.f.f]

@paviro I’ve switched to using the Pi cam for facial recognition, and my confidence numbers have improved significantly, but it still takes a good 5 seconds of standing absolutely still looking right at the camera to get it to work. I’ve trained the model with about 40 images of myself standing at various distances from the camera, sometimes looking right at it, other times staring blankly ahead (as if I were looking in the mirror).

Is 5 seconds the best I can hope for, or does it work faster for others? I have the frequency configured to interval : 1 although I don’t see much difference between 1 and 2 (or anything smaller than 1).

[lepetitnicolas]

hello,
After a few months of sleep, I wake up my mirror
i’ve just update the raspberry and the MagicMirror to the last version
also this module (facial recognition) to see if it works better
but when i try to make the training.xml with train.py, i’ve this error :

Reading training images...
--------------------
Assign label 1 to Gael
Assign label 2 to lepetitnicolas
--------------------

OpenCV Error: Assertion failed (ssize.area() > 0) in resize, file /build/opencv-ISmtkH/opencv-2.4.9.1+dfsg/modules/imgproc/src/imgwarp.cpp, line 1834
Traceback (most recent call last):
  File "train.py", line 98, in 
    faces.append(prepare_image(filename))
  File "train.py", line 56, in prepare_image
    return face.resize(cv2.imread(filename, cv2.IMREAD_GRAYSCALE))
  File "/home/pi/MagicMirror/modules/MMM-Facial-Recognition-Tools/lib/face.py", line 100, in resize
    interpolation=cv2.INTER_LANCZOS4)
cv2.error: /build/opencv-ISmtkH/opencv-2.4.9.1+dfsg/modules/imgproc/src/imgwarp.cpp:1834: error: (-215) ssize.area() > 0 in function resize

anyone could help me ?
Thanks

[nuckinfutz]

@lepetitnicolas Just saw this but here is the fix

cd home/pi/MagicMirror/modules/MMM-Facial-Recognition-Tools
sudo pip install future --upgrade

[EdChamberlain]

This may not be an appropriate place but is there a good resource / tutorial for setting up / configuring the modules for the mirror? I’m specifically interested in facial recognition and the calendars - so far I only have the basic mirror installed.

[lepetitnicolas]

@nuckinfutz
thanks, i do what you saw but i have the same error…

[chengyuanfei]

This post is deleted!

[mc_landin]

I can’t seem to get the module to work properly. I made pictures and generated a training.xml file. When I test said file it does identify me.

However, I can’t find a user array in the training file to add to the config.xml. When I add the only user present it still doesn’t work

[xchribiza]

I have managed to make this module to work finally…BUT …
I have one user (since I have just set it up) and it recognises me well etc…but it recognises other people as ME ???
Why ??
Is there something to be done ?

[mc_landin]

Anyone able to help me out with this? :)

https://forum.magicmirror.builders/topic/4206/facial-recognition-no-users

[reaper81]

Hello everyone

the class ‘everyone’, which should activate a module for every person, dont work for me. the clock-module for example stay inactive, no matter wich person is detected. The config looks like this:

{
module: “clock”,
position: “top_left”,
classes: “everyone”
},

Work this class for anyboby?

[j.e.f.f]

@reaper81 I think you also need to include the class default as the facial recognition app spends most of its time logged out.

[reaper81]

@j.e.f.f

the default-class works fine but i whould like to show modules only if a person is in the room. thats why the class “everyone” exist. Do you use it? does it work?

[j.e.f.f]

@reaper81 yeah in that case it should work for what you’re trying to do. If it isn’t then I don’t know why.

You could also try using a motion sensor to turn the screen on and off. Essentially when someone walks up to the screen it shows modules, and after a specified time out of no motion sensed, if turns itself back off.

[reaper81]

So i repeat my question: does anybody use the “everyone”-class and it work?

[mc_landin]

I am struggling to get modules using a name class to work. Still waiting for an answer as well

[JavierTSalas]

Hey guys. I’m having difficulty using my webcam with the capture.py script. I’m able to use fswebcame and motion to capture video but I keep getting errors running the script. I’m using a the playstion eye as a webcam. Any ideas?

[salamures]

Hi there, maybe someone is able to help me out.
I am trying to run capture.py but getting this Error

Traceback (most recent call last):
   File "capture.py", line 18, in 
      import lib.capture as capture
   File "/home/pi/MagicMirror/modules/MMM-Facial-Recognition-Tools/lib/capture.py", line 21, in 
     from . import config
   File "/home/pi/MagicMirror/modules/MMM-Facial-Recognition-Tools/lib/config.py", line 15, in 
     (CV_MAJOR_VER, CV_MINOR_VER, mv1, mv2) = cv2.__version__.split(".")
ValueError: not enough values to unpack (expected 4, got 3)