Snilles Magic Mirror Project

[Snille]

@cowboysdude Sure, what would you like to see? In the google gallery (the link above) there are lots of “close ups” but is it something in particular you are interested in?

[cowboysdude]

@Snille Sorry didn’t see the link!! That looks awesome. The bottom is a touch menu If I"m thinking correctly?

Please do share how you have the LED’s working for backlight… I’m very interested in that! :)

[Snille]

@cowboysdude Thank you!! :) The LEDs you say. :) Ok, for the moment, the mirror is not “aware” of the leds. This is something I’m planing to implement. But as it works now I’m using PixelWeb with Bibliopixel 2.x as a back end. Then I’m using the below sh script to trigger different (predefined so far) animations.

#!/bin/bash
#-----------------------------------------------------------------------------
# 
# Snilles MagicMirror Led Conrol Script.
# Use in conjunction with PixelWEB.
#
#-----------------------------------------------------------------------------
# Connfigure here!
# URL to PixelWEB API On the MM.
apiurl="http://x.x.x.x:8081/api";
# Default program if no argument is set.
defprog="back";
# Default red amount if non is set.
defred="45";
# Default green amount if non is set.
defgreen="30";
# Default blue amount if non is set.
defblue="0";
# Default brightness amount.
defamount="50";

## -------------------------- Dont edit below!! --------------------------- ##

while [[ $# -gt 0 ]] ; do
	case $1 in
		-h|-\?|--help)
			echo "Usage: mirrorleds.sh -p or --program [back, running, alarm, rainbow or thunder (rainbow and thunder needs no colors)] -r or -red [0-255] -g or --green [0-255] -b or --blue [0-255] -a or --amount [0-255]";
			exit;
			;;
		-p|--program)            
			if [ -n "$2" ]; then
				program="$2"
				shift
			else
				program="$defprog"
			fi
			;;
		-r|--red)
			if [ -n "$2" ]; then
				if [[ "$2" == ?(-)+([0-9]) ]]; then
					if [ "$2" -gt "255" ]; then
						red="255"
					elif [ "$2" -lt "0" ]; then
						red="0"
					else 
						red="$2"
					fi
					shift
				else
					red="$defred"
				fi
			fi
			;;
		-g|--green)
			if [ -n "$2" ]; then
				if [[ "$2" == ?(-)+([0-9]) ]]; then
					if [ "$2" -gt "255" ]; then
						green="255"
					elif [ "$2" -lt "0" ]; then
						green="0"
					else 
						green="$2"
					fi
					shift
				else
					green="$defgreen"
				fi
			fi
			;;
		-b|--blue)
			if [ -n "$2" ]; then
				if [[ "$2" == ?(-)+([0-9]) ]]; then
					if [ "$2" -gt "255" ]; then
						blue="255"
					elif [ "$2" -lt "0" ]; then
						blue="0"
					else 
						blue="$2"
					fi
					shift
				else
					blue="$defblue"
				fi
			fi
			;;
		-a|--amount)
			if [ -n "$2" ]; then
				if [[ "$2" == ?(-)+([0-9]) ]]; then
					if [ "$2" -gt "255" ]; then
						amount="255"
					elif [ "$2" -lt "0" ]; then
						amount="0"
					else 
						amount="$2"
					fi
					shift
				else
					amount="$defamount"
				fi
			fi
			;;
	esac
	shift
done

# Default program if non was given. 
if [ -z "$program" ]; then
	program="$defprog"
fi

# Default red amount if non was given. 
if [ -z "$red" ]; then
	red="$defred"
fi

# Default green amount if non was given. 
if [ -z "$green" ]; then
	green="$defgreen"
fi

# Default blue amount if non was given. 
if [ -z "$blue" ]; then
	blue="$defblue"
fi

# Default amount if non was given.
if [ -z "$amount" ]; then
	amount="$defamount"
fi


# Compose the colors
colors="$red,$green,$blue";

# 22 Pixel Alarm
if [ "$program" == "alarm" ]; then
	curl -H "Content-Type: application/json" -X POST --data '{"action":"startAnim","config":{"id":"ColorChase","config":{"end":-1,"start":0,"width":22,"color":['$colors']},"run":{"amt":1,"fps":300,"seconds":null,"max_steps":0,"untilComplete":false,"max_cycles":1}}}' $apiurl;
fi

# Rainbowalarm (multi color spinning)
if [ "$program" == "rainbow" ]; then
	curl -H "Content-Type: application/json" -X POST --data '{"action":"startAnim","config":{"id":"ColorPattern","config":{"colors":[[255,0,0],[255,165,0],[255,255,0],[0,255,0],[0,0,255],[128,0,128]],"width":20},"run":{"amt":1,"fps":300,"seconds":null,"max_steps":0,"untilComplete":false,"max_cycles":1}}}' $apiurl;
fi

# 1 Running Pixel
if [ "$program" == "running" ]; then
	curl -H "Content-Type: application/json" -X POST --data '{"action":"startAnim","config":{"id":"ColorChase","config":{"end":-1,"start":0,"width":1,"color":['$colors']},"run":{"amt":1,"fps":40,"seconds":null,"max_steps":0,"untilComplete":false,"max_cycles":1}}}' $apiurl;
fi
# Backlight
if [ "$program" == "back" ]; then
	curl -H "Content-Type: application/json" -X POST --data '{"action":"startAnim","config":{"id":"ColorPattern","config":{"colors":[['$colors']],"width":1},"run":{"amt":1,"fps":1,"seconds":null,"max_steps":0,"untilComplete":false,"max_cycles":1}}}' $apiurl;
fi

# Thunder
if [ "$program" == "thunder" ]; then
	curl -H "Content-Type: application/json" -X POST --data '{"action":"startAnim","config":{"id":"WhiteTwinkle","config":{"max_led":null,"speed":2,"density":1,"max_bright":'$amount'},"run":{"amt":1,"fps":300,"seconds":null,"max_steps":0,"untilComplete":false,"max_cycles":1}}}' $apiurl;
fi

# Stop everything
if [ "$program" == "stop" ]; then
	curl -H "Content-Type: application/json" -X POST --data '{"action":"stopAnim"}' $apiurl;
fi

# Add a new line...
echo $"";

Then I’m using Alexa (for now) to trigger different animations (via the HA-Bridge server). But later on this will be triggered by a module that “picks up” other modules communication so I can animate the leds depending on for example weather events, calendar events, memo events or whatever I can figure out. :) I just have to convince my wife that animating the leds IS a good thing… :)

[cowboysdude]

@Snille Awesome, Thank you!

[Snille]

I just added a quick comment on all the pictures in the gallery so you know what you are looking at. :)

[cowboysdude]

@Snille That is just awesome! Thank you!

[yawns]

Like cowboysdude I totally missed the link to your google gallery. The build is very amazing, I am a bit jealous on the 3D printer :)

Very nice!

[Snille]

@yawns Thank you! :) I know the post is way to long, but when I see others builds, I always want to know how they did things. So I just included all the information at the top. So people don’t have to ask for it. :)

[yawns]

@Snille said in Snilles Magic Mirror Project:

I know the post is way to long, but when I see others builds, I always want to know how they did things. So I just included all the information at the top

In fact I read your post, I just did not notice the “see here” link under your photo :)
I do like to see how others created their mirror (or other things)

[Snille]

@yawns Hehe, yes. If you are about to buy a 3D-Printer, I can recommend a PRUSA 3D-Printer. It’s my third printer and it’s by far the best one I have had (I built the first one myself). I’ve been 3D-Printing stuff for about 6 years and it’s great if you really want to get things done your “own” way. :) You can find some of the stuff I’ve done here.