Snilles Magic Mirror Project

[Snille]

@cowboysdude Thank you!! :) The LEDs you say. :) Ok, for the moment, the mirror is not “aware” of the leds. This is something I’m planing to implement. But as it works now I’m using PixelWeb with Bibliopixel 2.x as a back end. Then I’m using the below sh script to trigger different (predefined so far) animations.

#!/bin/bash
#-----------------------------------------------------------------------------
# 
# Snilles MagicMirror Led Conrol Script.
# Use in conjunction with PixelWEB.
#
#-----------------------------------------------------------------------------
# Connfigure here!
# URL to PixelWEB API On the MM.
apiurl="http://x.x.x.x:8081/api";
# Default program if no argument is set.
defprog="back";
# Default red amount if non is set.
defred="45";
# Default green amount if non is set.
defgreen="30";
# Default blue amount if non is set.
defblue="0";
# Default brightness amount.
defamount="50";

## -------------------------- Dont edit below!! --------------------------- ##

while [[ $# -gt 0 ]] ; do
	case $1 in
		-h|-\?|--help)
			echo "Usage: mirrorleds.sh -p or --program [back, running, alarm, rainbow or thunder (rainbow and thunder needs no colors)] -r or -red [0-255] -g or --green [0-255] -b or --blue [0-255] -a or --amount [0-255]";
			exit;
			;;
		-p|--program)            
			if [ -n "$2" ]; then
				program="$2"
				shift
			else
				program="$defprog"
			fi
			;;
		-r|--red)
			if [ -n "$2" ]; then
				if [[ "$2" == ?(-)+([0-9]) ]]; then
					if [ "$2" -gt "255" ]; then
						red="255"
					elif [ "$2" -lt "0" ]; then
						red="0"
					else 
						red="$2"
					fi
					shift
				else
					red="$defred"
				fi
			fi
			;;
		-g|--green)
			if [ -n "$2" ]; then
				if [[ "$2" == ?(-)+([0-9]) ]]; then
					if [ "$2" -gt "255" ]; then
						green="255"
					elif [ "$2" -lt "0" ]; then
						green="0"
					else 
						green="$2"
					fi
					shift
				else
					green="$defgreen"
				fi
			fi
			;;
		-b|--blue)
			if [ -n "$2" ]; then
				if [[ "$2" == ?(-)+([0-9]) ]]; then
					if [ "$2" -gt "255" ]; then
						blue="255"
					elif [ "$2" -lt "0" ]; then
						blue="0"
					else 
						blue="$2"
					fi
					shift
				else
					blue="$defblue"
				fi
			fi
			;;
		-a|--amount)
			if [ -n "$2" ]; then
				if [[ "$2" == ?(-)+([0-9]) ]]; then
					if [ "$2" -gt "255" ]; then
						amount="255"
					elif [ "$2" -lt "0" ]; then
						amount="0"
					else 
						amount="$2"
					fi
					shift
				else
					amount="$defamount"
				fi
			fi
			;;
	esac
	shift
done

# Default program if non was given. 
if [ -z "$program" ]; then
	program="$defprog"
fi

# Default red amount if non was given. 
if [ -z "$red" ]; then
	red="$defred"
fi

# Default green amount if non was given. 
if [ -z "$green" ]; then
	green="$defgreen"
fi

# Default blue amount if non was given. 
if [ -z "$blue" ]; then
	blue="$defblue"
fi

# Default amount if non was given.
if [ -z "$amount" ]; then
	amount="$defamount"
fi


# Compose the colors
colors="$red,$green,$blue";

# 22 Pixel Alarm
if [ "$program" == "alarm" ]; then
	curl -H "Content-Type: application/json" -X POST --data '{"action":"startAnim","config":{"id":"ColorChase","config":{"end":-1,"start":0,"width":22,"color":['$colors']},"run":{"amt":1,"fps":300,"seconds":null,"max_steps":0,"untilComplete":false,"max_cycles":1}}}' $apiurl;
fi

# Rainbowalarm (multi color spinning)
if [ "$program" == "rainbow" ]; then
	curl -H "Content-Type: application/json" -X POST --data '{"action":"startAnim","config":{"id":"ColorPattern","config":{"colors":[[255,0,0],[255,165,0],[255,255,0],[0,255,0],[0,0,255],[128,0,128]],"width":20},"run":{"amt":1,"fps":300,"seconds":null,"max_steps":0,"untilComplete":false,"max_cycles":1}}}' $apiurl;
fi

# 1 Running Pixel
if [ "$program" == "running" ]; then
	curl -H "Content-Type: application/json" -X POST --data '{"action":"startAnim","config":{"id":"ColorChase","config":{"end":-1,"start":0,"width":1,"color":['$colors']},"run":{"amt":1,"fps":40,"seconds":null,"max_steps":0,"untilComplete":false,"max_cycles":1}}}' $apiurl;
fi
# Backlight
if [ "$program" == "back" ]; then
	curl -H "Content-Type: application/json" -X POST --data '{"action":"startAnim","config":{"id":"ColorPattern","config":{"colors":[['$colors']],"width":1},"run":{"amt":1,"fps":1,"seconds":null,"max_steps":0,"untilComplete":false,"max_cycles":1}}}' $apiurl;
fi

# Thunder
if [ "$program" == "thunder" ]; then
	curl -H "Content-Type: application/json" -X POST --data '{"action":"startAnim","config":{"id":"WhiteTwinkle","config":{"max_led":null,"speed":2,"density":1,"max_bright":'$amount'},"run":{"amt":1,"fps":300,"seconds":null,"max_steps":0,"untilComplete":false,"max_cycles":1}}}' $apiurl;
fi

# Stop everything
if [ "$program" == "stop" ]; then
	curl -H "Content-Type: application/json" -X POST --data '{"action":"stopAnim"}' $apiurl;
fi

# Add a new line...
echo $"";

Then I’m using Alexa (for now) to trigger different animations (via the HA-Bridge server). But later on this will be triggered by a module that “picks up” other modules communication so I can animate the leds depending on for example weather events, calendar events, memo events or whatever I can figure out. :) I just have to convince my wife that animating the leds IS a good thing… :)

[cowboysdude]

@Snille Awesome, Thank you!

[Snille]

I just added a quick comment on all the pictures in the gallery so you know what you are looking at. :)

[cowboysdude]

@Snille That is just awesome! Thank you!

[yawns]

Like cowboysdude I totally missed the link to your google gallery. The build is very amazing, I am a bit jealous on the 3D printer :)

Very nice!

[Snille]

@yawns Thank you! :) I know the post is way to long, but when I see others builds, I always want to know how they did things. So I just included all the information at the top. So people don’t have to ask for it. :)

[yawns]

@Snille said in Snilles Magic Mirror Project:

I know the post is way to long, but when I see others builds, I always want to know how they did things. So I just included all the information at the top

In fact I read your post, I just did not notice the “see here” link under your photo :)
I do like to see how others created their mirror (or other things)

[Snille]

@yawns Hehe, yes. If you are about to buy a 3D-Printer, I can recommend a PRUSA 3D-Printer. It’s my third printer and it’s by far the best one I have had (I built the first one myself). I’ve been 3D-Printing stuff for about 6 years and it’s great if you really want to get things done your “own” way. :) You can find some of the stuff I’ve done here.

[yawns]

@Snille
I just bought a house, currently there is no budget for a 3D printer or any other “toys”. But I will get one in the future. Thanks for the reccomondation

[Mykle1]

@Snille said in Snilles Magic Mirror Project:

You can find some of the stuff I’ve done here.

That ball sculpture is crazy cool!!!