MMM-xiaomi - Temperature and Humidity from your smarthome

mirko3000

Yes the identification of the sensors is not really good, did not find a better solution so far.
As for the trend indicators: I pushed a new version where you can disable the trend icons (showTrend: false).

Albert2002

Just want to say that there is no different between the Xiaomi and Aqara Temperature sensor. Both are working like a charm. The only different is that the Aqara shows the Air pressure (in the MiHome app) as well.

@Mirko3000 Thank you for your hard work! You are always improving the module in light-speed!

I was playing around with my Yeelights colorbulbs but I didn’t get it working on MM. Guessing its because of they have they own ID, IP and token. However, thats why am still using the app. :-)

mirko3000

Did you try with the ‘miio --discover’ command line utility? Do the lights show up there?

Albert2002

@mirko3000 said in MMM-xiaomi - Temperature and Humidity from your smarthome:

Did you try with the ‘miio --discover’ command line utility? Do the lights show up there?

Yes I did so with success. I got the ID, IP and token. I had tried to add it like a sensor this way:

config: {
			gatewayIP: '192.168.2.160',
			gatewayToken: '6ebf9b84e5c615c09268166a99b95f0a',
			showWindow: true,
			showVentilation: false,
			minTemperature: false,
			maxHumidity: false,
                        showLights: true
			rooms: [
			{ name: 'Wohnzimmer', sortOrder: 30, devices : ['158d00015736a8', '158d000119fcb2'] },
			{ name: 'Bad', sortOrder: 30, devices : ['158d0001b911b9'] },
			{ name: 'Schlafzimmer', sortOrder: 30, devices : ['158d0001b91177', '158d00011919a3', '56234267'] }, //Bulp ID
			{ name: 'Arbeitszimmer', sortOrder: 30, devices : ['158d0001b9035b'] },
			{ name: 'Draußen', sortOrder: 30, devices : ['158d0001b920bd'] },
					],
				}
		},

and this way:

config: {
			gatewayIP: '192.168.2.160',
			gatewayToken: '6ebf9b84e5c615c09268166a99b95f0a',
			showWindow: true,
			showVentilation: false,
			minTemperature: false,
			maxHumidity: false,
                        showLights: true
			{ name: 'Bad', sortOrder: 30, devices : ['158d0001b911b9'] },
			{ name: 'Schlafzimmer', sortOrder: 30, devices : ['158d0001b91177', '158d00011919a3', ] },
			{ name: 'Arbeitszimmer', sortOrder: 30, devices : ['158d0001b9035b'] },
			{ name: 'Draußen', sortOrder: 30, devices : ['158d0001b920bd'] },
					],
                       gatewayIP: '192.168.2.101', // IP of the bulp
			gatewayToken: 'fd1d31c907fc5506fc379445eb6bd146', // token of the bulp
rooms: [
{ name: 'Flur', sortOrder: 30, devices : ['56234267'] }, // ID of the bulp
               ]


				}
		},

Btw I noticed some behaver am not sure about.
How to get rid of the notification about Humidity?
alt text

Its Full screen and always on the top. Even when the pages changing using MMM-Carousel its still on top.

Using stars as notification for open windows:
When I was gone to bed at night with open window there was a star shown. In the morning still with open window the star was gone. What happens there?

Are there no more indicators for the trent?

alt text

mirko3000

Hmm those Yeelights seem to be quite different, guess it will be hard to implement without having at least one piece on my own…

For the notifications: this is a magic mirror default, so I can’t change the behaviour. In your case you should configure your outside sensor (parameter outsideSensorId), then this will not show any notification. It is mainly used for indoor rooms. I can of course add a config to disable notifications at all.

The window states are not 100% reliable. It seems that sometimes the sensors send wrong values, I need to investigate why this is the case.

To your last question: I disabled the trend indicators by default, but you can re-enable them by setting the config: showTrend: true

mirko3000

Oh and I just fixed an issue with the notifications, they should disappear after 10 seconds, now they do again :)

BTW: please use the issue tracker on github to track issues, this helps other find similar problems:
https://github.com/mirko3000/MMM-xiaomi/issues

Albert2002

@mirko3000 said in MMM-xiaomi - Temperature and Humidity from your smarthome:

Oh and I just fixed an issue with the notifications, they should disappear after 10 seconds, now they do again :)

BTW: please use the issue tracker on github to track issues, this helps other find similar problems:
https://github.com/mirko3000/MMM-xiaomi/issues

Thank you for this! :)
In the future I’ll use the issue tracker.

cowboysdude

Excellent!!! All working.

mirko3000

Check the new config parameter ‘celcius’ from the latest commit, just put that to ‘false’ to show fahrenheit instead of celcius.

Albert2002

For those who have problems with getting the Token from the Gateway, I found a tool which you can use with Windows and its a singe click solution.
Keep in mind its only the Token of the Gateway (and other Xiaomi stuff), not the ID of the sensors!

https://github.com/ultrara1n/MiToolkit/releases

Direct download:
https://github.com/ultrara1n/MiToolkit/releases/download/1.5/MiToolkit.1.5.zip

Am not sure, is it translated already, so that are the steps:

You need:
Installed & working MiHome app on your Mobile
Java on you PC
USB debug enabled on your mobile
Connect your mobile with your PC. Hit the “Token auslesen” button - its the only button…
On your mobile you will be asked to create a backup. Agree, don’t use a password. After one, two minutes you will see all the Tokens in the Frame:

alt text