MMM-NOAA

idoodler

@tadeus1975 Please check out the Readme. You need to add this object to to /home/pi/MagicMirror/config/config.js

idoodler

@tadeus1975 I assume you have never added any module, you can post your config if this is the case and I may be able to send you the correct config.js

Hriereb

Any suggestion about changing the default language and using the Italian?

idoodler

@hriereb As far I see Italian is not supported. You can contribute by adding the italian translation for MMM-NOAA.

Hriereb

JS@hriereb said in MMM-NOAA:

@cowboysdude
How to change the default language?
I’ve seen a translation folder with some .json files so I created an it.json file to enable the italian translation. After that I added some lined to the MMM-NOAA.js file but it doesn’t work. Where’s my mistake? Thanks.

/* Magic Mirror
 * Module: MMM-NOAA
 * By cowboysdude and tbbear 
        modified by barnosch
 */
var c = 0;
var l = 1;
var loco = "";
"use strict";

Module.register("MMM-NOAA", {

    // Module config defaults.
    defaults: {
        updateInterval: 70 * 60 * 1000, // every 10 minutes
        animationSpeed: 0,
        initialLoadDelay: 8000,
        rotateInterval: 20 * 1000,
        maxWidth: "100%",
        apiKey: "",
        airKey: "",
	loco1: "xxx",
	loco2: "xxx",
	loco3: "xxx",
	pws: "XXX",
	pws1: "xxx",
	pws2: "xxx",
	pws3: "xxx",

	   langFile: {
            "en": "en-US",
            "de": "de-DE",
            "sv": "sv-SE",
            "es": "es-ES",
            "fr": "fr-FR",
            "zh_cn": "zh-CN",
            "da": "da",
            "nl": "nl-NL",
            "nb": "nb-NO",
            "it": "it-IT"
        },


        langTrans: {
            "en": "EN",
            "de": "DL",
            "sv": "SW",
            "es": "SP",
            "fr": "FR",
            "zh_cn": "CN",
            "da": "DK",
            "nl": "NL",
            "nb": "NO",
            "it": "IT",
        },

	levelTrans: {
        "1":"green",
		"2":"yellow",
		"3":"orange",
		"4":"red",
	}				

    },

    getTranslations: function() {
        return {
            en: "translations/en.json",
            da: "translations/da.json",
            sv: "translations/sv.json",
            de: "translations/de.json",
            es: "translations/es.json",
            fr: "translations/fr.json",
            zh_cn: "translations/zh_cn.json",
            nl: "translations/nl.json",
            nb: "translations/nb.json",
            it: "translations/it.json",
         };
    },

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "it",
	timeFormat: 24,
	units: "metric",

	modules: [
		{
			module: "alert",
		},
                {
                        module: 'MMM-NOAA',
                        position : "top_right",
                        language: "it",
                                config: {
                                apiKey: "xxxxxx",    // https://www.wunderground.com/weather/api  select the middle plan... 
	                        airKey: "xxxxxxx"    // IF you want Air Quality Index
                                }
                },

As I posted before I made an it.json file and put it in the translation folder. I’ve tried to update the MMM-NOAA.js
but it doesn’t seem to work. Can you help me finding my mistake?

idoodler

@hriereb May you please also post your it.json

Hriereb

@idoodler

{
“Atmospheric Conditions” : “Condizioni Atmosferiche”,
“Sunrise/Sunset”:“Alba/Tramonto”,
“AQI/UV/Wind”:“AQI/UV/Vento”,
“4 Day Forecast”:"Previsioni su quattro giorni ",
“Monday”: “Lunedì”,
“Tuesday”: “Martedì”,
“Wednesday”: "Mercoledì ",
“Thursday”: “Giovedì”,
“Friday”: “Venerdì”,
“Saturday”: “Sabato”,
“Sunday”: “Domenica”,
“Hours of Light”:“Ore di luce”,
“Last Updated”: “Ultimo aggiornamento”,
“Today”:“Oggi”,
“Mon”:“Lun”,
“Tue”:“Mar”,
“Wed”:“Mer”,
“Thu”:“Giov”,
“Fri”:“Ven”,
“Sat”:“Sab”,
“Sun”:“Dom”,
“Forecast”:“Previsioni”,
“Weather warning”:“Allerta meteo”,
“Night”: “Notte”
}

idoodler

@hriereb This is an invalide JSON, please replace “ with ".

Hriereb

@idoodler
Sorry,
I’m an absolute beginner, what do I have to replace?

idoodler

@hriereb As I already mentioned previously (but only halve correct) replace the characters “ (Left Double Quotation Mark) and ” (Right Double Quotation Mark) with " (Quotation Mark).
NOTE: The characters you used are slightly tilted (italic).

{
  "Atmospheric Conditions" : "Condizioni Atmosferiche",
  "Sunrise/Sunset":"Alba/Tramonto",
  "AQI/UV/Wind":"AQI/UV/Vento",
  "4 Day Forecast":"Previsioni su quattro giorni ",
  "Monday": "Lunedì",
  "Tuesday": "Martedì",
  "Wednesday": "Mercoledì ",
  "Thursday": "Giovedì",
  "Friday": "Venerdì",
  "Saturday": "Sabato",
  "Sunday": "Domenica",
  "Hours of Light":"Ore di luce",
  "Last Updated": "Ultimo aggiornamento",
  "Today":"Oggi",
  "Mon":"Lun",
  "Tue":"Mar",
  "Wed":"Mer",
  "Thu":"Giov",
  "Fri":"Ven",
  "Sat":"Sab",
  "Sun":"Dom",
  "Forecast":"Previsioni",
  "Weather warning":"Allerta meteo",
  "Night": "Notte"
}