Updating MagicMirror from v2.1.3 to v2.5.0

chetnaik · Oct 5, 2018, 7:40 PM

Hi , Is it possible to update MagicMirror from v2.1.3 to v2.5.0 ?
if yes then how
because below method is not working on my MM version 2.1.3… please advise

Updating
If you want to update your MagicMirror² to the latest version, use your terminal to go to your Magic Mirror folder and type the following command:

git pull && npm install
If you changed nothing more than the config or the modules, this should work without any problems. Type git status to see your changes, if there are any, you can reset them with git reset --hard. After that, git pull should be possible.

el97 · Oct 5, 2018, 11:32 PM

Are you in the MagicMirror directory when you type the command git pull && npm install?

Mykle1 · Oct 5, 2018, 11:57 PM

@el97

He should be. It wouldn’t work otherwise.

el97 · Oct 5, 2018, 11:58 PM

@mykle1 Yeah but the only thing he says is that it wont work :P

Mykle1 · Oct 6, 2018, 12:01 AM

@el97

Oy! Ok, then perhaps he’ll see your comment and have some success

justjim1220 · Oct 6, 2018, 4:39 AM

@el97

If you made any changes to the original MM2, you will need to move them, or delete them.

If you could post a screen shot of the terminal errors, might be able to help you.

el97 · Oct 6, 2018, 5:50 PM

@justjim1220 Uum… Im not the one that needs help :P @chetnaik is the one that made the post ;)

chetnaik · Oct 6, 2018, 1:52 PM

Here what I did

sudo apt-get update
sudo apt-get full-upgrade
sudo rpi-update
sudo reboot
pi@raspi:~ $ node -v
v10.11.0
pi@raspi:~ $ apt list nodejs
Listing… Done
nodejs/unknown,now 10.11.0-1nodesource1 armhf [installed]
N: There are 2 additional versions. Please use the ‘-a’ switch to see them.
pi@raspi:~ $ sudo apt update
Hit:1 http://archive.raspberrypi.org/debian stretch InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease
Hit:3 https://deb.nodesource.com/node_10.x stretch InRelease
Reading package lists… Done
Building dependency tree
Reading state information… Done
All packages are up to date.
pi@raspi:~ $ sudo apt install nodejs
Reading package lists… Done
Building dependency tree
Reading state information… Done
nodejs is already the newest version (10.11.0-1nodesource1).
The following packages were automatically installed and are no longer required:
lxkeymap python-cairo python-gobject python-gobject-2 python-gtk2 python-xklavier
Use ‘sudo apt autoremove’ to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
pi@raspi:~ $ node -v
v10.11.0

pi@raspi:~/MagicMirror $ npm run config:check

magicmirror@2.1.3 config:check /home/pi/MagicMirror
node tests/configs/check_config.js

Checking file… /home/pi/MagicMirror/config/config.js
Your configuration file don’t containt syntax error :)
pi@raspi:~/MagicMirror $ ls -a
. core .github js package.json splashscreen
… css .gitignore jsconfig.json package-lock.json tests
CHANGELOG.md .eslintignore Gruntfile.js LICENSE.md README.md translations
clientonly .eslintrc.json index.html modules run-start.sh .travis.yml
config fonts installers node_modules serveronly vendor
pi@raspi:~/MagicMirror $ sudo git pull && npm install
fatal: Not a git repository (or any of the parent directories): .git
pi@raspi:~/MagicMirror $ git stash
fatal: Not a git repository (or any of the parent directories): .git
pi@raspi:~/MagicMirror $ fatal: Not a git repository (or any of the parent directories): .git
-bash: syntax error near unexpected token `(’
pi@raspi:~/MagicMirror $ ^C
pi@raspi:~/MagicMirror $ git init
Initialized empty Git repository in /home/pi/MagicMirror/.git/
pi@raspi:~/MagicMirror $ git stash
fatal: bad revision ‘HEAD’
fatal: bad revision ‘HEAD’
fatal: Needed a single revision
You do not have the initial commit yet
pi@raspi:~/MagicMirror $ sudo git pull && npm install
fatal: No remote repository specified. Please, specify either a URL or a
remote name from which new revisions should be fetched.
pi@raspi:~/MagicMirror $ ^C
pi@raspi:~/MagicMirror $ git init
Reinitialized existing Git repository in /home/pi/MagicMirror/.git/
pi@raspi:~/MagicMirror $ sudo git pull
fatal: No remote repository specified. Please, specify either a URL or a
remote name from which new revisions should be fetched.
pi@raspi:~/MagicMirror $ git remote add origin https://github.com/MichMich/MagicMirror.git
pi@raspi:~/MagicMirror $ git stash
fatal: bad revision ‘HEAD’
fatal: bad revision ‘HEAD’
fatal: Needed a single revision
You do not have the initial commit yet
pi@raspi:~/MagicMirror $ sudo git pull
remote: Enumerating objects: 25, done.
remote: Counting objects: 100% (25/25), done.
remote: Compressing objects: 100% (20/20), done.
remote: Total 10389 (delta 7), reused 16 (delta 5), pack-reused 10364
Receiving objects: 100% (10389/10389), 12.11 MiB | 5.68 MiB/s, done.
Resolving deltas: 100% (5930/5930), done.
From https://github.com/MichMich/MagicMirror

[new branch] develop -> origin/develop
[new branch] master -> origin/master
[new branch] snyk-fix-zrd9ko -> origin/snyk-fix-zrd9ko
[new branch] v1.0.0 -> origin/v1.0.0
[new branch] weather-refactor -> origin/weather-refactor
[new tag] v2.5.0 -> v2.5.0
[new tag] V2.2.1 -> V2.2.1
[new tag] v.2.1.3 -> v.2.1.3
[new tag] v2.0.0 -> v2.0.0
[new tag] v2.0.1 -> v2.0.1
[new tag] v2.0.2 -> v2.0.2
[new tag] v2.0.3 -> v2.0.3
[new tag] v2.0.4 -> v2.0.4
[new tag] v2.0.5 -> v2.0.5
[new tag] v2.1.0 -> v2.1.0
[new tag] v2.1.1 -> v2.1.1
[new tag] v2.1.2 -> v2.1.2
[new tag] v2.2.0 -> v2.2.0
[new tag] v2.2.2 -> v2.2.2
[new tag] v2.3.0 -> v2.3.0
[new tag] v2.3.1 -> v2.3.1
[new tag] v2.4.0 -> v2.4.0
[new tag] v2.4.1 -> v2.4.1
There is no tracking information for the current branch.
Please specify which branch you want to merge with.
See git-pull(1) for details.

git pull

If you wish to set tracking information for this branch you can do so with:

git branch --set-upstream-to=origin/<branch> master

pi@raspi:~/MagicMirror $ npm install

magicmirror@2.1.3 install /home/pi/MagicMirror
cd vendor && npm install

audited 5 packages in 2.014s
found 2 low severity vulnerabilities
run npm audit fix to fix them, or npm audit for details

magicmirror@2.1.3 postinstall /home/pi/MagicMirror
sh installers/postinstall/postinstall.sh && npm run install-fonts

MagicMirror installation successful!

magicmirror@2.1.3 install-fonts /home/pi/MagicMirror
cd fonts && npm install

audited 1 package in 1.909s
found 0 vulnerabilities

audited 2152 packages in 35.461s
found 65 vulnerabilities (27 low, 27 moderate, 8 high, 3 critical)
run npm audit fix to fix them, or npm audit for details
pi@raspi:~/MagicMirror $ ^C
pi@raspi:~/MagicMirror $ npm audit

                   === npm audit security report ===
				   found 65 vulnerabilities (27 low, 27 moderate, 8 high, 3 critical) in 2152 scanned packages

run npm audit fix to fix 23 of them.
41 vulnerabilities require semver-major dependency updates.
1 vulnerability requires manual review. See the full report for details.
pi@raspi:~/MagicMirror $ npm audit fix

phantomjs-prebuilt@2.1.16 install /home/pi/MagicMirror/node_modules/phantomjs-prebuilt
node install.js

PhantomJS not found on PATH
Unexpected platform or architecture: linux/arm
It seems there is no binary available for your platform/architecture
Try to install PhantomJS globally
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: phantomjs-prebuilt@2.1.16 (node_modules/phantomjs-prebuilt):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: phantomjs-prebuilt@2.1.16 install: node install.js
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1

grunt@1.0.3
request@2.88.0
jshint@2.9.6
mocha-logger@1.0.6
socket.io@2.1.1
moment@2.22.2
added 55 packages from 547 contributors, removed 16 packages and updated 36 packages in 126.138s
fixed 23 of 65 vulnerabilities in 2152 scanned packages
1 vulnerability required manual review and could not be updated
4 package updates for 41 vulns involved breaking changes
(use npm audit fix --force to install breaking changes; or refer to npm audit for steps to fix these manually)
pi@raspi:~/MagicMirror $ npm audit fix --force
npm WARN using --force I sure hope you know what you are doing.

phantomjs-prebuilt@2.1.16 install /home/pi/MagicMirror/node_modules/phantomjs-prebuilt
node install.js

PhantomJS not found on PATH
Unexpected platform or architecture: linux/arm
It seems there is no binary available for your platform/architecture
Try to install PhantomJS globally

electron-chromedriver@2.0.0 install /home/pi/MagicMirror/node_modules/electron-chromedriver
node ./download-chromedriver.js

successfully downloaded and extracted!

electron@3.0.2 postinstall /home/pi/MagicMirror/node_modules/electron
node install.js

Downloading tmp-1923-1-SHASUMS256.txt-3.0.2
[============================================>] 100.0% of 4.74 kB (4.74 kB/s)
npm WARN grunt-stylelint@0.9.0 requires a peer of stylelint@^8.0.0 but none is installed. You must install peer dependencies yourself.
npm WARN stylelint-config-recommended@1.0.0 requires a peer of stylelint@^8.0.0 but none is installed. You must install peer dependencies yourself.
npm WARN stylelint-config-standard@17.0.0 requires a peer of stylelint@^8.0.0 but none is installed. You must install peer dependencies yourself.

mocha@5.2.0
spectron@4.0.0
electron@3.0.2
stylelint@9.6.0
added 674 packages from 887 contributors, removed 60 packages, updated 125 packages and moved 4 packages in 214.794s
fixed 37 of 38 vulnerabilities in 2324 scanned packages
1 vulnerability required manual review and could not be updated
4 package updates for 29 vulns involved breaking changes
(installed due to --force option)
pi@raspi:~/MagicMirror $ git status
On branch master

Initial commit

Untracked files:
(use “git add …” to include in what will be committed)

    .eslintignore
    .eslintrc.json
    .github/
    .gitignore
    .travis.yml
    CHANGELOG.md
    Gruntfile.js
    LICENSE.md
    README.md
    clientonly/
    config/
    core
    css/
    fonts/
    index.html
    installers/
    js/
    jsconfig.json
    modules/
    package-lock.json
    package.json
    run-start.sh
    serveronly/
    splashscreen/
    tests/
    translations/
    vendor/

nothing added to commit but untracked files present (use “git add” to track)
pi@raspi:~/MagicMirror $ npm run config:check

magicmirror@2.1.3 config:check /home/pi/MagicMirror
node tests/configs/check_config.js

Checking file… /home/pi/MagicMirror/config/config.js
Your configuration file don’t containt syntax error :)
pi@raspi:~/MagicMirror $

chetnaik · Oct 6, 2018, 3:42 PM

after performing above steps still package.json says version": “2.1.3”

so my question is did above process upgraded my magicmirror to v2.5.0? ??

here are more info from package.json file.
{
“name”: “magicmirror”,
“version”: “2.1.3”,
“description”: “The open source modular smart mirror platform.”,
“main”: “js/electron.js”,
“scripts”: {
“start”: “sh run-start.sh”,
“install”: “cd vendor && npm install”,
“install-fonts”: “cd fonts && npm install”,
“postinstall”: “sh installers/postinstall/postinstall.sh && npm run install-fonts”,
“test”: “NODE_ENV=test ./node_modules/mocha/bin/mocha tests --recursive”,
“test:unit”: “NODE_ENV=test ./node_modules/mocha/bin/mocha tests/unit --recursive”,
“test:e2e”: “NODE_ENV=test ./node_modules/mocha/bin/mocha tests/e2e --recursive”,
“config:check”: “node tests/configs/check_config.js”
},
“repository”: {
“type”: “git”,
“url”: “git+https://github.com/MichMich/MagicMirror.git”
},
“keywords”: [
“magic mirror”,
“smart mirror”,
“mirror UI”,
“modular”
],
“author”: “Michael Teeuw”,
“contributors”: [
“https://github.com/MichMich/MagicMirror/graphs/contributors”
],
“license”: “MIT”,
“bugs”: {
“url”: “https://github.com/MichMich/MagicMirror/issues”
},
“homepage”: “https://magicmirror.builders”,
“devDependencies”: {
“chai”: “^3.5.0”,
“chai-as-promised”: “^6.0.0”,
“current-week-number”: “^1.0.7”,
“grunt”: “^1.0.3”,
“grunt-eslint”: “latest”,
“grunt-jsonlint”: “latest”,
“grunt-markdownlint”: “^1.0.39”,
“grunt-stylelint”: “latest”,
“grunt-yamllint”: “latest”,
“http-auth”: “^3.1.3”,
“jshint”: “^2.9.6”,
“mocha”: “^5.2.0”,
“mocha-each”: “^1.1.0”,
“spectron”: “^4.0.0”,
“stylelint”: “^9.6.0”,
“stylelint-config-standard”: “latest”,
“time-grunt”: “latest”
},
“dependencies”: {
“body-parser”: “^1.17.2”,
“colors”: “^1.1.2”,
“electron”: “^3.0.2”,
“express”: “^4.15.3”,
“express-ipfilter”: “0.3.1”,
“feedme”: “latest”,
“helmet”: “^3.6.1”,
“iconv-lite”: “latest”,
“mocha-logger”: “^1.0.6”,
“moment”: “^2.22.2”,
“request”: “^2.88.0”,
“rrule-alt”: “^2.2.5”,
“simple-git”: “^1.73.0”,
“socket.io”: “^2.1.1”,
“valid-url”: “latest”,
“walk”: “latest”
}
}

justjim1220 · Oct 6, 2018, 5:50 PM

@el97 Apologies!