Unsuccessful video streaming - help please :)

[mwoodage]

Thanks shbatm - i’ve tried the stream several times on my laptop and it shows up without any problems. I’ve now installed VLC player on the Raspberry Pi and i can’t get the feed to work. I’m using exactly the same on both - any ideas?

rtsp://admin:*******@192.168.1.77/h264Preview_01_main

[mwoodage]

hi evroom, thanks for the help,
I tried what you said (after installing PM2!) but i just get the following:-

pi@raspberrypi:~ $ pm2 start omx_stream1
[PM2][ERROR] script not found : /home/pi/omx_stream1
script not found : /home/pi/omx_stream1
┌──────┬────┬──────┬────────┬───┬─────┬────────┐
│ Name │ id │ mode │ status │ ↺ │ cpu │ memory │
└──────┴────┴──────┴────────┴───┴─────┴────────┘
Use pm2 show <id|name> to get more details about an app
pi@raspberrypi:~ $

Is that right?? I’m assuming not, as its saying script not found. I’ve un-installed omx player and re-installed it but get the same results.

Sorry, i’m completely new to this so please be patient with me :)

[evroom]

Did you setup auto start according to this procedure?

https://github.com/MichMich/MagicMirror/wiki/Auto-Starting-MagicMirror

Perhaps it worked for me because the omx_stream was already known by pm2 in my case.
Perhaps it needs to run once for pm2 to be useful.
No idea.

pm2 list

Only shows mm, or MagicMirror?

[shbatm]

@mwoodage The stream didn’t work in VLC player either (e.g. VLC by itself, nothing to do with MagicMirror)? Have you tried on your regular computer? Not playing in VLC may be signs of a bigger problem–unfortunately I can’t troubleshoot every camera out there… if you can get it working in VLC on the Pi, I can help try and get it working in the module.

Also FYI to you and @evroom, I am working on an update to the module to use VLC to play the videos instead of OMXPlayer – see details here: https://forum.magicmirror.builders/topic/2743/mmm-rtspstream-video-streaming-from-live-feeds-security-cameras/163

[bhepler]

@mwoodage - Not to worry, we’ll get you sorted out.

For starters, you are missing the script omx_stream1. pm2 has nothing to run so it can’t monitor the process. Or at least, that script isn’t located in /home/pi/

[mwoodage]

Hi everyone, thanks for your help so far.
Yesterday i wiped my RP clean and started a fresh install - however I still can’t get the camera stream to show up in the VLC player.
Is it because the camera is 5MP and therefore there’s too much data for the VLC player to process?
The same stream works on my laptop?

Thanks
Martin

[shbatm]

@mwoodage said in Unsuccessful video streaming - help please :):

Is it because the camera is 5MP and therefore there’s too much data for the VLC player to process?

That may be the case. Most cameras offer a second, lower-resolution stream that you could use for something like the mirror.