MMM-Loxone

idoodler

@meininger I am asking this, because I noticed, that I have some occasional crashes in some other modules like Calendar and Weather which lead to a crashed MagicMirror, so the presence detection feature isn’t working.

Meininger

@idoodler so i have an idea how it not works for me. I dont use pm2 to start magicmirror. My mirror is in the badroom also for playing music, so i startet the setup with a max2play distribution for easy Audio Set up. Then i installed the magicmirror Script, its runs perfekt. Only starting the mirror with pm2 dosent work for me. So i looked for an other way to Start, i have found that with the crontap file, it starts the mirror at reboot.

At the Moment the mmm-Loxone Script runs ok for me, room Temperature, notifications and virtual Status values are publisched on the mirror. Thank you for this god Job!

My Loxone is on the acutal Software Version 10.0.9. 24.

idoodler

@meininger Ok, there may be some unexpected reconnects due to some changes in the authentication behavior on the Loxone side. But you shouldn’t see an issues because the Module will automatically reconnect to the Miniserver. I will update the module as soon as I can.

Thanks for keeping me up-to-date 👍

Meininger

@idoodler keeping up to Date is the only way to make Things better… 😉

Meininger

@idoodler at the Moment it is an new error, the mirror dosn´t start. Its an error at boot “detect-rpi” module can not load. So i deactivate the complete Loxone Module in Mirror config file, than start´s the mirror like before, but without the cool Loxone feature. :-(

DO86

Hello everyone,

I also have some trouble configuring the Loxone module. The MM itself and the calender, traffic, weather an News modules are running without any problem.

BUT: The Loxone modules does not want to run at all. Attached you’ll find the required parts of my config.

Maybe some of you can find the wrong passage.

Thanks in advance

bobbythemoh

@DO86 I think “position” is wrong.
See my config:

              {
                        module: "MMM-Loxone",
                        position: "bottom_left", 
                        config: {
                                host: "Loxone IP",
                                user: "Username",
                                pwd: "Password",
                                presence: "true", //if you want to use the light controller V2 to toggle the display
                                roomUuid: "0ea3ebd1-00eb-04ef-ffff390cde3b9b45", //Room ID where MM is located
                                showInfoNotifications: "true",
                                showErrorNotifications: "true",
                                showSystemNotifications: "true",
                                observingUuids:[
                                                "103d9aaf-0037-597e-ffff390cde3b9b45",//Variable you want to observe
                                                ]
                                    }
                },

bobbythemoh

@idoodler : Today i updated my RPI and i add 2 Modules “MMM-RPI-LED” and “MMM-Moon-Phase” (Just a side info, maybe this is the reason for my issue).

“MMM-Loxone” was working perfect for a long time. Now i am having issues with the Monitor coming alive again.

Test-Scenario:
Light in the Room is ON; in the config I changed Presence: “false” -->MM Starts and works
now i am switching presence: “true”; light is still on -->MM Starts and works
now i am switching off the light --> MM gets dark
now I am switching on the light -->MM stays dark

in the PM2 LOG i can see the status of the light controller changing.

I think there was something changed in the OS. Does anyone experience a similar behaviour?

Thank you.

idoodler

@bobbythemoh Hi, may you please post the MagicMirrors log via pm2 log mm. Did you update your Raspberry pi?

bobbythemoh

Hi,

I did sudo apt-get update, then sudo apt-get upgrade.
Please find the log file. As you can see, changing the light status works.

0|MagicMir | Starting MagicMirror: v2.5.0
0|MagicMir | Loading config ...
0|MagicMir | Loading module helpers ...
0|MagicMir | No helper found for module: alert.
0|MagicMir | No helper found for module: clock.
0|MagicMir | Initializing new module helper ...
0|MagicMir | Module helper loaded: MMM-ImagesPhotos
0|MagicMir | Initializing new module helper ...
0|MagicMir | Check MagicMirror version for node helper 'MMM-Loxone' - Minimum ve                                                            rsion:  2.1.1 - Current version: 2.5.0
0|MagicMir | Version is ok!
0|MagicMir | Module helper loaded: MMM-Loxone
0|MagicMir | Initializing new module helper ...
0|MagicMir | Module helper loaded: calendar
0|MagicMir | No helper found for module: currentweather.
0|MagicMir | Initializing new module helper ...
0|MagicMir | Module helper loaded: MMM-MoonPhase
0|MagicMir | Initializing new module helper ...
0|MagicMir | Module helper loaded: newsfeed
0|MagicMir | All module helpers loaded.
0|MagicMir | Starting server on port 8080 ...
0|MagicMir | Server started ...
0|MagicMir | Connecting socket for: MMM-ImagesPhotos
0|MagicMir | Starting node helper for: MMM-ImagesPhotos
0|MagicMir | Connecting socket for: MMM-Loxone
0|MagicMir | Connecting socket for: calendar
0|MagicMir | Starting node helper for: calendar
0|MagicMir | Connecting socket for: MMM-MoonPhase
0|MagicMir | Starting module helper: MMM-MoonPhase
0|MagicMir | Connecting socket for: newsfeed
0|MagicMir | Starting module: newsfeed
0|MagicMir | Sockets connected & modules started ...
0|MagicMir | Launching application.
0|MagicMir | Create new calendar fetcher for url: http://localhost:8080/modules/                                                            calendars/E4AD5817-F7E8-4334-AA45-34CBF51B7682.ics - Interval: 300000
0|MagicMir | Create new news fetcher for url: http://derStandard.at/?page=rss&re                                                            ssort=Seite1 - Interval: 300000
0|MagicMir | Create new news fetcher for url: https://rss.orf.at/news.xml - Interval: 300000
0|MagicMir | Opening Socket to your Miniserver
0|MagicMir | MMM-Loxone Download LoxApp3.json
0|MagicMir | MMM-Loxone Search room with uuid: 0ea3ebd1-00eb-04ef-ffff390cde3b9b45
0|MagicMir | MMM-Loxone Found room: OG Bad
0|MagicMir | MMM-Loxone Search IRC for room temperature
0|MagicMir | MMM-Loxone Found IRC (Intelligente Raumregelung) in room OG Bad
0|MagicMir | MMM-Loxone Search LightControls and LightV2Controls in room
0|MagicMir | MMM-Loxone Found LightControl (Badezimmerlicht) in room OG Bad
0|MagicMir | MMM-Loxone NotificationUuid: 0ea3ebd1-008d-029d-ffff390cde3b9b45
0|MagicMir | MMM-Loxone Enabling statusupdates
0|MagicMir | MMM-Loxone Successfully executed 'dev/sps/enablebinstatusupdate' with code 200 and value 1
0|MagicMir | MMM-Loxone Got room temperature: 22.4
0|MagicMir | MMM-Loxone Got lightMood change to: All off(778)
0|MagicMir | MMM-Loxone Got lightMood change to: Custom mode(1)
0|MagicMir | MMM-Loxone Got lightMood change to: All on(777)
0|MagicMir | MMM-Loxone Got lightMood change to: All off(778)