updated installer script available for testing

[sdetweil]

@bhepler what did u have to do for the pm2 install?

[bhepler]

@sdetweil - I pulled this from the official GitHub page: sudo npm install -g pm2. Once I ran that, I just changed to the ~/MagicMirrors/installers folder and told pm2 to run/maintain it: pm2 start mm.sh

[sdetweil]

@bhepler weird… that is that the script does between the two log entries

	echo pm2 not installed, installing >>$logfile	
	result=$(npm install $up -g pm2)
	echo pm2 install result $result >>$logfile

$up is for the mac

bet it needed sudo…

[sdetweil]

@bhepler

I also added to catch the stderr output to the log too

	echo pm2 not installed, installing >>$logfile	
	result=$(sudo npm install $up -g pm2 2>&1)
	echo pm2 install result $result >>$logfile

[sdetweil]

@bhepler could you retest the installer? just rename your current MagicMirror folder out of the way… thanks

course u have pm2 already … never mind

[bhepler]

@sdetweil - No worries. I have a spare Pi and a SD card I can use. I’ll get it cranked out tonight. I’ll get you that info.

[sdetweil]

@bhepler thanks… i got some new sd cards today, so I will test too.

[bhepler]

@sdetweil - Brand new Buster installation on a RPi 3B+. Installation script worked as expected.

I had trouble with pm2 on my existing mirror too. I ended up upgrading to the latest pm2 in order to get it to remember to start on boot.

At this point, I think your script is handling it properly. Thanks for the quick replies!

[sdetweil]

@bhepler oh, there is a script for just pm2 as well.

Thx for feedback.

[NathTheDude]

Hey sam (@sdetweil ),

Thanks for this, made my life a lot easier.

So, I just did a new build with Buster on a RPI Zero W. All looked good and I have configured mm2 to start on reboot of the Pi. I am start/stop/restart and check the status of mm2 and is looks to be working, the mm2 logs are also good with no error logs.

The problem I am facing is that the magicMirror page via chromium seems to try and load (white screen which changes to a pure black screen) however seems to fail/crash and go back to the Raspbian desktop.

This happens when I reboot the pi and also when I manually try to start/restart the mm2 service.

Anything you think I am missing?

Thanks