Read the statement by Michael Teeuw here.
Upgrading Mirror Mark II
-
@BD0G - Yeah, that’s a good idea. Right now, so long as nobody bumps it, it should be okay. The spade connectors include a little bit of insulation at the joint where you crimp them down. The plug really is a nifty little addition.
-
@bhepler Yes , but the ends that plug into the Male Spades are at full AC potential. 110 V AC assuming you are in the states. Small strips of shrink tubing fit over the end of the plugs and heated to shrink down onto the exposed ends would be a nice addition.
As long as you dont send this in to Underwriters Labratorories to have it certified as UL listed you may be fine for now.I built a plug just like that into the base I built for my 3 D printer and it works amazing!
-
Wow, what a massive piece of mirror! I love the triple display setup. And regarding the reworked cabeling I have now some good inspirations for my own make over. Thanks!
Btw, which module do you use for the spinning globe? -
@Fozi Just so you know. Others have reported that the spinning globe is very processor intensive and a standard Raspberry Pi can struggle with displaying it without stutters or hang ups.
-
@bhepler please show us how change the globe for looking like your globe…
-
@BD0G thanks for the info, it’s good to know!
-
Awesome mirror!
Awesome beard too, btw ;)
-
@Fozi On his YT page he mentions this is a video on a loop, not a MagicMirror module.
-
Whats the globe code and the rotating text? I like that a lot.
-
Oke thanks.
-
Yeah, I don’t know how I keep missing notifications for this thread. The globe is just a video clip that the company purchased through the marketing department. It’s all of 60 seconds long and is playing through VLC. The Magic Mirror software isn’t running on the center and right displays.
I worked out the command to play the video on a loop and with a borderless configuration and used a cron job to play it after boot.
-
@Alphons - The rotating text is the company logo. I used Blender to add some 3D to it and then animate the spin. Once I had a full rotation, I exported it to MP4 and then used a video editor to create a 5 minute MP4 with just the rotation on loop.
And @BD0G will be happy to know that the electrician put an outlet on the wall behind the mirror. So I’ll be reworking the power plug & switch so they aren’t visible. I’ll put a simple switch with a Molly lock on it because I have some available.
-
Well, the mirror has been refreshed with an internal power cable to an electrical outlet behind the mirror. It looks much more professional now. The forum isn’t letting me upload images right now, but I’ll circle back here and post them eventually.
-
Now that photos are working again, here are some photos of the refreshed Magic Mirror Mark II. All three screens are active and the look is much cleaner.
And a close up of the switch.
-
That is the bomb! :thumbsup:
-
@bhepler That’s Cool
Where have you bought the mirror and is that glass or acrylic?
-
@Stoffbeuteluwe - It’s glass and it came from www.twowaymirrors.com. They have a rep who floats around here every so often. Ah, here they are: @twowaymirrors
I had a great experience with them and they’ve supplied the glass for four out of my five mirrors. This one was a special case and they boxed it up in a custom crate for me. Excellent stuff.
-
@bhepler :thumbs_up_medium-light_skin_tone:
-
@bhepler woow looking great know,are the monitors link to One pi ?
-
@hayman - Nope. Three pi, one for each monitor. One of them is acting as a gateway onto our secured network. It brokers the VPN connection and then provides DHCP and internet access to the other two. This way, all three Pi are connected to the internet via some VM in… Sydney, I think. It depends on how they have it configured this week.
The network is the company product, so the mirror is a constant demonstration. (not that you can tell on the two monitors just playing video, but it’s the thought that counts).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login