[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

evroom

@Egnos said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

the link works in VLC but still doesn’t work in MM

Hi,

What does this say ?

pm2 logs --lines 100

The part where you should see

0|MagicMirror  | Starting stream stream1 with args: [

And

pm2 status

should show

omx_stream1

And can you try it from the command line ?

omxplayer --genlog --avdict rtsp_transport:tcp --live --video_queue 4 --fps 30 --win "0 0 354 240" rtsp://wowzaec2demo.streamlock.net/vod/mp4:BigBuckBunny_115k.mov

Egnos

Hi @evroom ,

@evroom said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

What does this say ?
pm2 logs --lines 100

I never posted this …!

I launched the command on the terminal you recommended but I still don’t see anything, here is the result:

pi@MagicMirror:~ $ omxplayer --genlog --avdict rtsp_transport:tcp --live --video_queue 4 --fps 30 --win "0 0 354 240" rtsp://wowzaec2demo.streamlock.net/vod/mp4:BigBuckBunny_115k.mov
Video codec omx-h264 width 240 height 160 profile 578 fps 30.000000
Audio codec aac channels 2 samplerate 12000 bitspersample 16
Subtitle count: 0, state: off, index: 1, delay: 0
V:PortSettingsChanged: 240x160@30.00 interlace:0 deinterlace:0 anaglyph:0 par:1.00 display:0 layer:0 alpha:255 aspectMode:0

And this the log “omxplayer.log”:
omxplayer.log

I paste all the info that the MM prints on the terminal:

> magicmirror@2.10.1 start /home/pi/MagicMirror
> ./run-start.sh

[19:45:33.744] [LOG]    Starting MagicMirror: v2.10.1
[19:45:33.792] [LOG]    Loading config ...
[19:45:33.805] [LOG]    Loading module helpers ...
[19:45:37.253] [LOG]    Initializing new module helper ...
[19:45:37.255] [LOG]    Module helper loaded: MMM-RTSPStream
[19:45:37.256] [LOG]    All module helpers loaded.
[19:45:37.257] [LOG]    Starting server on port 8080 ... 
[19:45:37.346] [LOG]    Server started ...
[19:45:37.348] [LOG]    Connecting socket for: MMM-RTSPStream
[19:45:37.350] [LOG]    PM2: Stopping all OMXPlayer Streams...
[19:45:37.352] [LOG]    Sockets connected & modules started ...
[19:45:38.246] [LOG]    Launching application.
[19:45:46.329] [LOG]    Starting stream stream1 using: omxplayer --avdict rtsp_transport:tcp --win 786,238,1138,480 --live --video_queue 4 --fps 30 --no-osd rtsp://wowzaec2demo.streamlock.net/vod/mp4:BigBuckBunny_115k.mov
[19:45:46.426] [LOG]    Starting PM2 for omx_stream1
[19:45:53.630] [LOG]    PM2 started for omx_stream1

I don’t understand what’s missing…

evroom

@Egnos said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

I don’t understand what’s missing…

It does look good.

In principle, the line from the pm2 log

[19:45:46.329] [LOG]    Starting stream stream1 using: omxplayer --avdict rtsp_transport:tcp --win 786,238,1138,480 --live --video_queue 4 --fps 30 --no-osd rtsp://wowzaec2demo.streamlock.net/vod/mp4:BigBuckBunny_115k.mov

should work as standalone.
If it does not play standalone, so from the command line, then it will not work in MMM-RTSPStream.

I would disable the module and make sure nothing is running anymore (no omxplayer stuff).

module: "MMM-RTSPStream",
disabled: true,

pm2 restart mm
pm2 status

Make sure ‘omx_stream1’ is not present.
Stop it when necessary

pm2 stop omx_stream1
pm2 delete omx_stream1

ps -eaf | grep -v grep | grep omxplayer

Kill any omxplayer process (kill -9 ).

Then run omxplayer from command line:

omxplayer --avdict rtsp_transport:tcp --win 786,238,1138,480 --live --video_queue 4 --fps 30 --no-osd rtsp://wowzaec2demo.streamlock.net/vod/mp4:BigBuckBunny_115k.mov

evroom

@Egnos said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

Are there any errors in config.js?

This is my config that works.
I think the only real difference is the omxRestart entry.

{
  module: "MMM-RTSPStream",
  disabled: false,
  position: "bottom_right",
  header: "MMM-RTSPStream Test",
  config: {
    autoStart: true,
    omxRestart: 1,
    rotateStreams: false,
    moduleWidth: "352px", // Width in px of the module.
    moduleHeight: "240px", // Height in px of the module.
    localPlayer: 'omxplayer',
    remotePlayer: 'none',
    showSnapWhenPaused: false,
    remoteSnaps: false,
    stream1: {
      name: 'BigBuckBunny',
      url: 'rtsp://wowzaec2demo.streamlock.net/vod/mp4:BigBuckBunny_115k.mov',
      frameRate: "25",
      protocol: "tcp",
      width: "352px", // The width in px of the stream.
      height: "240px", // The height in px of the stream.
    }
  }
},

Egnos

@evroom many thanks!
I don’t know why but now I’m viewing the video in MM.
I haven’t touched anything!

Egnos

@evroom I finally understood what the problem is … that is VNC.
I use VNC to connect with the Raspberry PI and for some reason, using the VNC interface, the player is not displayed!
If instead I turn on the monitor where the Raspberry PI is physically connected I magically see the streaming … whether I run the command from the terminal or with the MM.

Can you explain this behavior?

evroom

@Egnos said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

Can you explain this behavior?

No, I cannot explain this, but I noticed it too.
No video over the VNC connection.

When I google, I see this recommendation:

Open VNC Server>Options>Troubleshooting. Then make sure "enable experimental direct capture mode is checked.

You might give it a try.

costascontis

hello,lil help,what do i have to add in custom.css to align MMM-RTSPStream window with the module below?
https://imgur.com/XQZNEvg

Egnos

@evroom now, enabling in VNC options “direct capture mode”, also from VNC I see the stream on omxplayer and on MM.

Many Thanks! 👍

imdickie

I’m going from a working Raspi3 to a Raspi4 and using the exact same working module configuration I cannot get video on omxplayer using this module.

I set up a pristine image and loaded everything one at a time, but this one fails. I pulled out all of the modules to make sure there was nothing in them that was causing the issue.

Below is my module config and my logs pulled using pm2 logs mm. There is an error, but I don’t know enough about this to determine the cause. Can anyone review the logs and provide some direction?

Thanks.

 		 {
		    module: "MMM-RTSPStream",
		    position: "bottom_bar",
		    config: {
		        autoStart: true,
		        rotateStreams: true,
		        rotateStreamTimeout: 10,
		        moduleWidth: 642,
		        moduleHeight: 362,
		        localPlayer: 'omxplayer',
		        remotePlayer: 'none',
		        showSnapWhenPaused: true,
		        remoteSnaps: true,
		        stream1: {
		            name: '',
		            url: 'rtsp://xxx:xxx@192.168.1.164:554/Streaming/Channels/102/',
		            frameRate: '10',
		            snapshotType: 'url',
		            snapshotRefresh: 10,
		            width: 640,
		            height: 360,
		            },
		        }
		}

pi@raspberrypi:~ $ pm2 logs mm --lines 100
[TAILING] Tailing last 100 lines for [mm] process (change the value with --lines option)
/home/pi/.pm2/logs/mm-error.log last 100 lines:
0|mm | [2020-04-08 14:17:49.908] [ERROR] TypeError: Cannot convert undefined or null to object
0|mm | at Function.keys ()
0|mm | at stopProcs (/home/pi/MagicMirror/modules/MMM-RTSPStream/node_helper.js:469:32)
0|mm | at /home/pi/MagicMirror/modules/MMM-RTSPStream/node_helper.js:498:17
0|mm | at /home/pi/MagicMirror/modules/MMM-RTSPStream/node_modules/pm2/lib/API.js:606:19
0|mm | at /home/pi/MagicMirror/modules/MMM-RTSPStream/node_modules/pm2-axon-rpc/lib/client.js:45:10
0|mm | at Parser. (/home/pi/MagicMirror/modules/MMM-RTSPStream/node_modules/pm2-axon/lib/sockets/req.js:67:8)
0|mm | at Parser.emit (events.js:200:13)
0|mm | at Parser._write (/home/pi/MagicMirror/modules/MMM-RTSPStream/node_modules/amp/lib/stream.js:91:16)
0|mm | at doWrite (_stream_writable.js:417:12)
0|mm | at writeOrBuffer (_stream_writable.js:401:5)

/home/pi/.pm2/logs/mm-out.log last 0|mm |
0|mm | > magicmirror@2.11.0 0|mm | > DISPLAY=“${DISPLAY:=:0}” 0|mm |
0|mm | [2020-04-08 14:17:48.507] [LOG] 0|mm | [2020-04-08 14:17:48.514] [LOG] 0|mm | [2020-04-08 14:17:48.519] [LOG] 0|mm | [2020-04-08 14:17:49.292] [LOG] 0|mm | [2020-04-08 14:17:49.293] [LOG] 0|mm | [2020-04-08 14:17:49.293] [LOG] 0|mm | [2020-04-08 14:17:49.399] [LOG] 0|mm | [2020-04-08 14:17:49.421] [LOG] 0|mm | [2020-04-08 14:17:49.422] [LOG] 0|mm | [2020-04-08 14:17:49.423] [LOG] 0|mm | [2020-04-08 14:17:49.424] [LOG] 0|mm | [2020-04-08 14:17:49.531] [LOG] 0|mm | [2020-04-08 14:17:49.908] [LOG] 0|mm | [2020-04-08 14:17:49.916] [LOG] 0|mm | [2020-04-08 14:17:49.916] [LOG] 0|mm | [2020-04-08 14:17:53.508] [LOG] 0|mm | [2020-04-08 14:17:53.527] [LOG] 0|mm | [2020-04-08 14:17:53.698] [LOG] 100 lines:
start /home/pi/MagicMirror
./node_modules/.bin/electron js/electron.js
Starting MagicMirror: v2.11.0
Loading config …
Loading module helpers …
Initializing new module helper …
Module helper loaded: MMM-RTSPStream
All module helpers loaded.
Starting server on port 8080 …
Server started …
Connecting socket for: MMM-RTSPStream
PM2: Stopping all OMXPlayer Streams…
Sockets connected & modules started …
Launching application.
Whoops! There was an uncaught exception…
MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
Starting stream stream1 using: omxplayer --avdict rtsp_transport:tcp --win 282,1501,922,1861 --live --video_queue 4 --fps 30 --no-osd rtsp://xxx:xxx@192.168.1.164:554/Streaming/Channels/102/
Starting PM2 for omx_stream1
PM2 started for omx_stream1