MMM-Tube-Status (London Underground)

yawns

Looks nice, just about what I had in mind with colours.

djbenny07

thanks very much. not installed a new module before so we’ll see how it goes!

Is there any instructions on module installation? to put in the config.js as to the location of the module on the screen?

nigel-daniels

@djbenny07 check out the read me file on Github, it details the options and provides an example.

nigel-daniels

@yawns I was thinking of making the font the line colours but then the Northern line would have never shown up :( It turns out TfL provide detailed UI and colour guides so I was able to get the correct colours for each line.

djbenny07

@nigel-daniels I have done as the config suggests however the display says it needs a valid config file.

yawns

@djbenny07
Then please show your entire config file. If the config.js file is there but the mirror says it is missing then there is something missing, most of the time , or }
Please put ` (back ticks) before and after your config file content when posting, then it will be parsed and shown correctly. Also please remove appids/app tokens, they should be kept private.

djbenny07

’

var config = {
port: 8080,

    language: 'en',
    timeFormat: 24,
    units: 'metric',

    modules: [
            {
                    module: 'alert',
            },
            {
                    module: 'clock',
                    position: 'top_left'
            },
            {
                    module: 'calendar',
                    header: 'Public Holidays',
                    position: 'top_left',
                    config: {
                            calendars: [
                                    {
                                            symbol: 'calendar-check-o ',
                                            url: 'webcal://www.calendarlabs.com/templates/ical/UK-Holidays.ics'
                                    }
                            ]
                    }
            },
            {
                    module: 'compliments',
                    position: 'lower_third'
            },
            {
                    module: 'currentweather',
                    position: 'top_right',
                    config: {
                            location: 'London',
                            locationID: '245613',  //ID from http://www.openweathermap.org
                            appid: 'ID Number taken out'
                    }
            },
            {
                    module: 'weatherforecast',
                    position: 'top_right',
                    header: 'Weather Forecast',
                    config: {
                location: 'London',
                            locationID: '245613',  //ID from http://www.openweathermap.org
                appid: 'ID Number taken out'
                    }
            },
            {

’

djbenny07

@djbenny07 i took it out of there as it didnt work. could it be corrected? is it possible to get it on the right hand upper corner underneath the clock?

bhepler

@djbenny07 Is that the entire config file? I ask because it’s not closed properly.

Please put the module configuration that you’re trying to get to work back in and post the entire file for us so we can check it all. We’ll get you running.

djbenny07

yes, it is the entire file it currently works.

nigel-daniels

@djbenny07 I noticed that at the end of the file the last two lines should change and it should end something like:

{
module: 'weatherforecast',
position: 'top_right',
header: 'Weather Forecast',
config: {
location: 'London',
locationID: '245613', //ID from http://www.openweathermap.org
appid: 'ID Number taken out'
}
}]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== 'undefined') {module.exports = config;}

If you then want to add the tube status module something like this should work:

{
module: 'weatherforecast',
position: 'top_right',
header: 'Weather Forecast',
config: {
location: 'London',
locationID: '245613', //ID from http://www.openweathermap.org
appid: 'ID Number taken out'
}
},
{
module: 'MMM-Tube-Status',
position: 'top_left',
header: 'Tube Status'
}]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== 'undefined') {module.exports = config;}

I hope that helps.

nigel-daniels

BTW I have just updated the code so that if the optional show_all=false config is used and all of the lines are offering a good service there is a line displayed to indicate this rather than the module just disappearing.

djbenny07

OK I have found that i didn’t copy all the text. the below does not work

’

var config = {
port: 8080,

    language: 'en',
    timeFormat: 24,
    units: 'metric',

    modules: [
            {
                    module: 'alert',
            },
            {
                    module: 'clock',
                    position: 'top_left'
            },
            {
                    module: 'calendar',
                    header: 'Public Holidays',
                    position: 'top_left',
                    config: {
                            calendars: [
                                    {
                                            symbol: 'calendar-check-o ',
                                            url: 'webcal://www.calendarlabs.com/templates/ical/UK-Holidays.ics'
                                    }
                            ]
                    }
            },
            {
                    module: 'compliments',
                    position: 'lower_third'
            },
            {
                    module: 'currentweather',
                    position: 'top_right',
                    config: {
                            location: 'London',
                            locationID: '264443',  //ID from http://www.openweathermap.org
                            appid: 'number'
                    }
            },
            {
                    module: 'weatherforecast',
                    position: 'top_right',
                    header: 'Weather Forecast',
                    config: {
                location: 'London',
                            locationID: '264443',  //ID from http://www.openweathermap.org
                appid: 'Number'
                    }
            },
            {
            module: 'MMM-Tube-Status'
            position: 'top_left'
            header: 'Tube'
            }
            {
                    module: 'newsfeed',
                    position: 'bottom_bar',
                    config: {
                            feeds: [
                                    {
                                            title: "BBC Top Stories",
                                            url: "http://feeds.bbci.co.uk/news/rss.xml"
                                    }
                            ],
                            showSourceTitle: true,
                            showPublishDate: true
                    }
            },
    ]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== ‘undefined’) {module.exports = config;}
’

strawberry 3.141

@djbenny07 you missed 3 commas in there

{
    module: 'MMM-Tube-Status',
    position: 'top_left',
    header: 'Tube'
},

nigel-daniels

@djbenny07 ok there were a couple issues here that my linter picked up:

the tube module must look like this:

{
module: 'MMM-Tube-Status',
position: 'top_left',
header: 'Tube'
},

Note the terminating commas on each line bar the last one in the braces.

The final line seems to use ticks to quote undefined not single quotes so it should be:

if (typeof module !== 'undefined') {module.exports = config;}

It can happen that copying between editors, email clients, browsers, etc introduces this sort of error and it’s a real pain to spot!

I hope this fixes it up for you.

djbenny07

can the position be the same as another module though? i still get the message to saying ‘Please create config file’

as my clock is in top_left

EDIT: Just noticed that i missed the ’ from the module name. added that in and still issue

yawns

@djbenny07 you are still missing the closing , at the end of the tube module lines, as several users mentioned above

djbenny07

@yawns yes my bad. i noticed this and corrected it. still same message

yawns

@djbenny07 are you kidding? Look at the three lines you got there for the tube module. All three lines MUST end with a comma

djbenny07

@yawns haha, im being really dumb i know. i have finally seen it, long day. thats what im going to blame it on.

its working now!