Read the statement by Michael Teeuw here.
Complete Walkthrough - Install MagicMirror on a PC - Windows 7/10
-
@sdetweil Yes, it’s a Windows 10 laptop with a detachable screen that becomes a tablet basically.
“Runs fine” = On the laptop, using Git Bash, I can start the MM2 normally with “npm start”.
“Run it remotely” = The MM2 running on the tablet part of the laptop will sit in the kitchen (no keyboard or mouse). I want to manage it from my desktop in my office using Git Bash ssh connection.The laptop came with Edge, but I’ve been using Chrome.
http://192.168.1.65:8080 fails
http://localhost:8080 works
-
Windows doesn’t support remote display like linux does. u have to use an rdp client
I am booted to my linux system now -
@sdetweil Oh, of course! I’ll work on that…thanks!
-
@dwburger said in Complete Walkthrough - Install MagicMirror on a PC - Windows 7/10:
The laptop came with Edge, but I’ve been using Chrome.
http://192.168.1.65:8080 fails
http://localhost:8080 worksso, that looks like the address/ipWhitelist setting above…
(by default MM thinks it is in a closed box on the wall, so only allows connections from INSIDE the box) -
@sdetweil :thumbs_up:
-
@dwburger said in Complete Walkthrough - Install MagicMirror on a PC - Windows 7/10:
Runs fine” = On the laptop, using Git Bash, I can start the MM2 normally with “npm start”.
but I don’t understand this…
with the change to the start script, it runs in windows without bash… just regular windows batch
(cmd/powershell) -
@sdetweil OK
-
@dwburger said in Complete Walkthrough - Install MagicMirror on a PC - Windows 7/10:
I want to manage it from my desktop in my office using Git Bash ssh connection.
also, don’t know what this means… manage… it doesn’t NEED to run MM at all… just display it.
u could have two instances running on the base machine… 2 different ports…
the tablet accesses port(8081) , the base another (8080)run the tablet instance as serveronly then no ui memory consumption on the base for that instance
to make a second copy from the first, just copy the MM folder to MM1, and change the config for port (and address/whitelist above)
then do npm serveronly for the tablet mm
-
All,
You can not copy and paste though. I had to manually type it all in to make it work.
Still in MagicMirror;
nano package.json
right under the other “start”: “???”
go to the line below it and hit enter.
Then type in the blank space you just made.
“start”: “node_modules/.bin/electron js/electron.js”,
//DO NOT LEAVE OUT THE PUNCTUATION. ESPECIALLY THE COMMA AT THE END.
//I speak from expereince on this matter.
//Mykle1 usually has to help me find it after struggling for a couple hours.
THEN:
cd ~/MagicMirror/vendor
npm install
cd fonts
npm install
NOW IT will RUN
Thank you agian Mykle1
I am really enjoying this on my laptop,
so much easier to do testing ect. -
@Plainbroke-0 it was Sam, but anyway I cut and paste ALL the time. you need to add the code block marks around the actual steps to make them readable
-
I just made the change, and this is what I get when trying npm start:
$ npm start
magicmirror@2.12.0 start C:\Users\blake\MagicMirror
run-start.sh‘run-start.sh’ is not recognized as an internal or external command,
operable program or batch file.
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! magicmirror@2.12.0 start:run-start.sh
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the magicmirror@2.12.0 start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.npm ERR! A complete log of this run can be found in:
npm ERR! C:\Users\blake\AppData\Roaming\npm-cache_logs\2020-07-07T18_11_04_725Z-debug.log -
@dwburger said in Complete Walkthrough - Install MagicMirror on a PC - Windows 7/10:
“node_modules/.bin/electron js/electron.js”
Thank you dwburger! This fixed my issue!
-
I guess I spoke too soon. npm starts, but I have a blank screen. Haven’t done anything to the config.js file, except make a copy of the config.js.sample, and removed the .sample. See output:
$ npm run config:check
magicmirror@2.12.0 config:check C:\Users\blake\MagicMirror
node js/check_config.js[2020-07-07 13:50:13.582] [INFO] Checking file… C:\Users\blake\MagicMirror\config\config.js
[2020-07-07 13:50:13.630] [LOG] Line 1 col 1 Definition for rule ‘prettier/prettier’ was not found.
C:\Users\blake\MagicMirror\js\check_config.js:66
throw new Error(“Wrong syntax in config file!”);
^Error: Wrong syntax in config file!
at C:\Users\blake\MagicMirror\js\check_config.js:66:10
at FSReqCallback.readFileAfterClose [as oncomplete] (internal/fs/read_file_context.js:63:3)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! magicmirror@2.12.0 config:check:node js/check_config.js
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the magicmirror@2.12.0 config:check script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.npm ERR! A complete log of this run can be found in:
npm ERR! C:\Users\blake\AppData\Roaming\npm-cache_logs\2020-07-07T18_50_13_660Z-debug.log -
@blake_northrup not run-start
“start”:“node_modules/.bin/electron js/electron.js”,
-
@blake_northrup because u installed on windows, there are a couple extra steps
cd MagicMirror
cd vendor
npm install
cd …\fonts. 2dots
npm install
cd … 2dotthe npm start
this phone editor will not let me enter 2 dots, displays as 3
-
@sdetweil Thank you sdetweil. I will try thins now, and let you know.
-
@sdetweil Still getting black screen after performing these steps. For some reason, it is stating that I have the wrong syntax in the config file.
$ npm run config:check
magicmirror@2.12.0 config:check C:\Users\blake\MagicMirror
node js/check_config.js[2020-07-08 07:59:36.797] [INFO] Checking file… C:\Users\blake\MagicMirror\config\config.js
[2020-07-08 07:59:36.854] [LOG] Line 1 col 1 Definition for rule ‘prettier/prettier’ was not found.
C:\Users\blake\MagicMirror\js\check_config.js:66
throw new Error(“Wrong syntax in config file!”);
^Error: Wrong syntax in config file!
at C:\Users\blake\MagicMirror\js\check_config.js:66:10
at FSReqCallback.readFileAfterClose [as oncomplete] (internal/fs/read_file_context.js:63:3)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! magicmirror@2.12.0 config:check:node js/check_config.js
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the magicmirror@2.12.0 config:check script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.npm ERR! A complete log of this run can be found in:
npm ERR! C:\Users\blake\AppData\Roaming\npm-cache_logs\2020-07-08T12_59_36_872Z-debug.log -
@sdetweil Nevermind. All is now working. Had an extra bit of info in my config file that didn’t need to be there. Thanks again for all of your help sdetweil!
-
Hi,
what was your “extra bit of info in my config file” ? i haf the same error and dont find an error with my config file on my new installed MagicMirrorThanks :-)
-
@dphotograph Hey dphotograph, I had somehow copied the bottom part twice, and that was my problem. I just copied the config sample again, and built all of my modules, one by one.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login