MMM-MotionEye - surveillance video stream on your mirror!

AWall

This post is deleted!

fox

which camera du you suggest? I never had one. Should work for and in my garden (to observe the kids)

Binog

Just have a look for the noir camera. Have a look for amazon.com. There is an official cam - I think - by the raspberry company. But any other that support the onboard psi cam plug is imho better than usb cam. But that is your decision.

darbos

@emos
I had that same issue. I ended up just creating a few mmm-mogioneye module entries in the config file

SdeGeata

@Binog

Did you ever get an answer back on this one? I am having the same problem. I see everything fine without autohide active, but if I activate autohide, I see it for a bit during page load and never again after. I get detected motion emails and photo uploads so the detection isn’t the problem. It just doesn’t get fed to the mirror module somehow. Maybe my Web-hook config is off?

It would be helpful to know if you fixed your issue and how you did it.

Binog

Hey, SdeGeata
No, actually I didn’t

I circumvented it by setting up a motioneyeos raspberry pi zero. As I needed the larger image on my Magicmirror I used “fast…?” option, which does not provide any of the motion activities,. what was fine to me.
I do think, this is not merely a problem of motioneye, but of the MM its self.
With every update of MM the Gap went bigger, I got more problems.
Now, streaming the motioneyeos to two MMs it is more steady, nonetheless I do habe outages. I don’t see a picture,. although my browser directed to motioneyeos shows an actual one. Restarting MM solves that issue- normally,…
Good look to You !

SdeGeata

@Binog

Thanks for the info. I’ll keep trying stuff out and see what happens.

SdeGeata

@Cato
So how do we use that Webhook URL to trigger the hidden module. I have been screwing with it for days trying to get it to work. Can you clarify the config for that?

OberfragGER

@Cato
I really want to use the AutoHide feature. But the stream is fixed and always displayed. Is there any possibility…?

	{
		module: "MMM-MotionEye",
		position: "bottom_left",
		config: {
			url: "http://pihole:8081",
			autoHide: true,
			autoHideDelay: "10000",
			forcedRefreshInterval: 60000,
			width: "400px",
			debug: false
				}
	},

OberfragGER

@oberfragger
ok. solved.

Somehow it was working after an hour or so.

Also- you have to enable access to the mirror via
address: “0.0.0.0” and whitelist

The the commands http://mirror:8080/motioneye and http://mirror:8080/motioneye/hide are working.