MMM-MarineWeather

[minomit]

@grena I0m copy/past some problem:

{
            module: "MMM-MarineWeather",
            "pages": {
                            "tempo reale": "top_right"
            },
            //position: "top_right",
            config: {
                latitude: 40.10 , // Latitude
                longitude: 18.52, // Longitude
                appid: "414492aa-c717-11e9-a3da-0242ac130004-4144953e-c717-11e9-a3da-0242ac130004" // API Key for your tests
            }
        },

edited, PLEASE use the markup around code and config blocks (three backtics on a separate line before and after)

[grena]

@minomit, do you use MMM-Page-Selector ?

I wanted to do a final test to reproduce your bug by installing MMM-Page-Selector, it works ! So, I added some error messages in the module to get more information but you will have to look at the console when starting MagicMirror with DevTools.

[ryanbeljan]

@grena this is a super cool module! I noticed that there are quite a few other weather parameters that the StormGlass API offers (i.e. gust, cloudCover, seaLevel, visibility, etc.) that aren’t yet built into your module. Do you have any tips/guide for how I would go about adding them in?

https://docs.stormglass.io/#/weather

[boivinmi]

@grena I also have the same behavior. Here is my config :

{
   module: "MMM-MarineWeather",
   header: "Marine Weather",
   position: "top_right",
   config: {
      latitude: 46.829853,  // Latitude 
      longitude: -71.254028, // Longitude
      appid: "414492aa-c717-11e9-a3da-0242ac130004-4144953e-c717-11e9-a3da-0242ac130004",
      dataSource: "sg",
      params: "airTemperature,windSpeed,windDirection"
   }
},

And result is :

[Deckard99]

I’m having the same issue where it just displays “Loading”…….

{
module: “MMM-MarineWeather”,
position: “top_right”,
config: {
latitude: 32.7157,
longitude: 117.16,
appid: “XXXXXXXX-9a15-11ea-b3e2-0242ac130002-9be8a7f6-9a15-11ea-b3e2-0242ac130002” //StormGlass API Key (docs.stormglass.io)
}
},

[grena]

@ryanbeljan : Thank you for your positive feedback. I will work on a new version of the module to use the new information of API v2 (currently the module uses API v1) ;)

@boivinmi : Currently, it’s not possible to choose the information displayed with params. By removing this line from your configuration, it works fine!

@Deckard99 : Indeed, there is a problem with waveHeight at your location (probably because it is a lake and not the sea). In the next version, I will integrate a better detection of this type of error to avoid the total blocking of the module!

[boivinmi]

@grena : Sorry no luck, I removed every config except latitude, longitude et appid and it still shows Loading…

[grena]

@boivinmi
With your MMM-MarineWeather configuration, it works fine! Did you restart the magic mirror?

{
   module: "MMM-MarineWeather",
   header: "Marine Weather",
   position: "top_right",
   config: {
      latitude: 46.829853,  // Latitude 
      longitude: -71.254028, // Longitude
      appid: "414492aa-c717-11e9-a3da-0242ac130004-4144953e-c717-11e9-a3da-0242ac130004"
   }
},

Since I can’t reproduce your bug, you have to see if there are any error messages in the console!

[Deckard99]

@grena I am by the Pacific Ocean…not a lake…not that I don’t like lakes :)

[grena]

@Deckard99 said in MMM-MarineWeather:

latitude: 32.7157,
longitude: 117.16,

For me, the place associated with this coordinates is located near a lake in China! You may be able to verify that the coordinates are correct: www.latlong.net

[Deckard99]

Google says this is San Diego…where I live…

v2 is up an working, great job!

[grena]

@Deckard99 said in MMM-MarineWeather:

Google says this is San Diego…where I live…

I think you forgot the - for the longitude (to the west of Greenwich) !

With these coordinates, you’re in San Diego!

latitude: 32.7157,
longitude: -117.16,

[grena]

Hello everyone,

MMM-MarineWeather 0.2.0 has just been released, you can now:

• Display additional information (pressure, cloud cover, visibility, sea level) with API v2.
• Customize displayed information (except water temperature and air temperature).

To update:

cd ~/MagicMirror/modules/MMM-MarineWeather
git pull

I hope you like this new version.
Please inform me of any problems.

Grena

[uros76]

Thanks for this module, it works great!

[andymassey]

@grena Nice little module!

I have the full thing working (like the graphic on the left), but was hoping to use the simpler version (like the graphic on the far right) – but using params causes an error… Maybe I’m getting the syntax wrong – could you provide an example of how that line of the config should appear please?

Thanks.

[grena]

@grena Nice little module!

Thanks ;)

I have the full thing working (like the graphic on the left), but was hoping to use the simpler version (like the graphic on the far right) – but using params causes an error… Maybe I’m getting the syntax wrong – could you provide an example of how that line of the config should appear please?

The parameters requested from Storm Glass must be kept to a minimum, i.e., airTemperature and waterTemperature like this:

modules: [
	{
		module: "MMM-MarineWeather",
		position: "top_right",
		config: {
			latitude: 0, // Latitude 
			longitude: 0, // Longitude
			appid: "abcde12345abcde12345abcde12345ab", // StormGlass API key (docs.stormglass.io)
			params: ["airTemperature", "waterTemperature"]
		}
	}
]

[RIKKO14]

Hello @grena ,

Have you been able to rework on the module, notably on the high and low tide values ​​which are not correct and the logos that I found for you