used the amazing complete setup but after 'npm start'.....

broberg

@Ancient said in used the amazing complete setup but after 'npm start'.....:

I’ve got the same Problem.
Fresh installation of Raspian on an Raspberry Pi3.

Running the install Script again doesn’t help.

Even if you remove the magicmirror folder before running it again?

I had a similar issue (don’t know if it was exactly the same, since I didn’t save the log).
It seems like the Electron.js is the issue, in my case it was missing for some reason, removing the magicmirror folder and running the install script again did the trick for me.

Ancient

Yep,
deleteing as well as renaming the MagicMirror Folder won’t do the trick for me.
Maybe it’s related to this Issue https://github.com/MichMich/MagicMirror/issues/567

Where should the electron.js be located, i believe it’s missing here too.

broberg

@Ancient said in used the amazing complete setup but after 'npm start'.....:

Yep,
deleteing as well as renaming the MagicMirror Folder won’t do the trick for me.
Maybe it’s related to this Issue https://github.com/MichMich/MagicMirror/issues/567

Where should the electron.js be located, i believe it’s missing here too.

In the magicmirror folder, node_modules and then electron or electron-prebuilt

maybe try to install it manually?

npm install electron --save-dev

broberg

also, are you all running the X GUI or are you trying to start it directly from the prompt it boots in to?

Ancient

I try to start it directly from the prompt

npm install electron --save-dev

electron@1.4.12 postinstall /home/pi/MagicMirror/node_modules/electron
node install.js

magicmirror@2.0.0 /home/pi/MagicMirror
├── electron@1.4.12
└── UNMET PEER DEPENDENCY grunt@1.0.1

npm WARN grunt-yamllint@0.2.0 requires a peer of grunt@~0.4.0 but none was installed.

alonshwartz1966

@broberg the install of what? the entire process of the MagicMirrir?

alonshwartz1966

@nem1 thanks for the feedback. My connection was OK during the installation

broberg

@alonshwartz1966

Yes, remove the entire magicmirror folder and run the install script again, for me the script stopped (without errors) several times,

Also, when you are trying to start it, do you try to start it via the LXterminal in the desktop environment or directly in the boot prompt?

Heretic

I get a very similar error if I’m just running at the CLI. With the GUI running NPM START (from a local terminal window) is successful, I never did get it going from CLI.

I also never got PM2 to successfully work without manually kicking it off after the gui has launched.

I’ve taken about 4 runthroughs at the install, so at this point I’ve no idea what the issue is.

pi@raspberrypi:~/MagicMirror $ DISPLAY=:0 npm start

magicmirror@2.0.0 start /home/pi/MagicMirror
electron js/electron.js

npm ERR! Linux 4.4.32-v7+
npm ERR! argv “/usr/bin/nodejs” “/usr/bin/npm” “start”
npm ERR! node v6.9.1
npm ERR! npm v4.0.2
npm ERR! code ELIFECYCLE
npm ERR! magicmirror@2.0.0 start: electron js/electron.js
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the magicmirror@2.0.0 start script ‘electron js/electron.js’.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the magicmirror package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! electron js/electron.js
npm ERR! You can get information on how to open an issue for this project with:
npm ERR! npm bugs magicmirror
npm ERR! Or if that isn’t available, you can get their info via:
npm ERR! npm owner ls magicmirror
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR! /home/pi/MagicMirror/npm-debug.log

nuckinfutz

Here is what I would do as I’ve been in your shoes’

This is how I do it and I’ve done it close to 50 times.

Ignore everyone else for now. You will be starting from scratch. Again.

Go here and follow the Noobs install procedure. You want the full Noobs NOT Noobs Lite

https://www.raspberrypi.org/downloads/noobs/

When you boot this choose the first option (raspian) After it finishes
Dont add users or change anything else leave all defaults with the exception of the following

Make sure you set your localization, keyboard, wireless etc. by going to

Preferences -> Raspberry Pi Configuration

Open a terminal session
Your prompt should look like the following

pi@raspberrypi:~ $

copy and paste the following into a terminal. This is one line. accept any defaults if a question comes up.

curl -sL https://raw.githubusercontent.com/MichMich/MagicMirror/master/installers/raspberry.sh | bash

Now Copy and paste

cd /home/pi/MagicMirror

DISPLAY=:0 npm start dev

If you dont want the Console running omit “dev” from the end

I always start the MM using this method.