read csv-data and put it in an array

[Perlchamp]

yes.
[“Italy”],

which one? in your corona ?

[sdetweil]

@Perlchamp i provided a complete working sample for my module above… copy/paste it into your config.js

[Perlchamp]

i did copy it, but doesn’t work yet. have i look on your code. is there a comma after the date. i think this shouldn’t be there. i deleted it, but still does not work => black screen

[sdetweil]

@Perlchamp you copied all this exactly, right?

{
			module:"MyCovid19",
			disabled:false,
			position:"top_left",
			classes: 'sam',			
			config:{
				countries:["Italy","USA","China","Spain", "France",'Sweden'],
				// line colors can be any definition of color either a name ,or a hex string
				// one per country above, used in order,
				line_colors:['red','white','green','yellow','#34ebde','#34eb00'],
				//				
				chart_type:"cumulative_deaths",  // or "cumulative deaths"
				chart_title:"cumulative deaths by country", // however u want to label
				// the vertical steps on the chart.. how tall u want it to be and how mant increments 
				ranges:{min:0,max:30000,stepSize:5000},
				// size of the chart in pixels
			    width: 400,
			    height: 400,	
			    // only used if we need to debug something
			    debug:false,
			    startDate:'02/01/2020',
			    //backgroundColor: 'white',
			},
		},	

[Perlchamp]

my config yet:

		{
			module:"MyCovid19",
			disabled:false,
			position:"top_left",
			classes: 'sam',			
			config:{
				countries:["Italy"],
				//countries:["Italy","USA","China","Spain", "France",'Sweden'],
				// line colors can be any definition of color either a name ,or a hex string
				// one per country above, used in order,
				//line_colors:['red','white','green','yellow','#34ebde','#34eb00'],
				line_colors:['white'],
				//				
				chart_type:"cumulative_deaths",  // or "cumulative deaths"
				chart_title:"cumulative deaths by country", // however u want to label
				// the vertical steps on the chart.. how tall u want it to be and how mant increments 
				ranges:{min:0,max:30000,stepSize:5000},
				// size of the chart in pixels
			    width: 400,
			    height: 400,	
			    // only used if we need to debug something
			    debug:false,
			    startDate:'02/01/2020'
			    //backgroundColor: 'white',
			},
		},

[sdetweil]

@Perlchamp I used yours exactly, and works

[Perlchamp]

may it need time to load the raw data?
i will start it, drink a coffee, will come back and see …

[sdetweil]

@Perlchamp raw data is the csv file from the source

it should be there within a few seconds…

[sdetweil]

I will be busy for next few hours with grandson

[Perlchamp]

my old config doesn’t go either. something’s wrong. but what ?

[sdetweil]

@Perlchamp did you do the npm install in my module folder per the instructions?

[Perlchamp]

shame on me. i didn’t install npm , tztztz …
ok, now it works fine …
the mistake i made before was to create an empty node_helper.js in my modul-folder, though the errors came …
how said, everything’s fine now, but i will have a lot of work writing a node_helper.js. i copied your node_helper.js (sample) ini my module-folder => no errors :-)
how said, i’m a noob and i don’t know, if i can handle this all to manage.

i want to code a small app, showing me the birthdays of the actual month. like this:

maybe you can be my tutor, taking my hands and help me …

so long
many thanks in advance

stay healthy
keep corona away

[sdetweil]

@Perlchamp said in read csv-data and put it in an array:

i want to code a small app,

there is a minimum set of stuff to do… its not small if you don’t understand the stuff…
I will answer questions and teach a little of the structure… I won’t write anything for you.

[Perlchamp]

that’s not what i wanted (writing code for me). my big problem is, not to know how i can start, how i can test code-snippets and so on …
i read some articles, but when i want to test some lines of code, i don’t know what to do. in my magicmirror module i can’t do that => error messages … i hope that i have expressed myself clearly and understandably …
if i have a code-snoppet, go to terminal and put in

node xxx.js

path not found, module not found, and many other error messages … maybe i soon despair …

[sdetweil]

@Perlchamp is the xxx.js in the current folder? if not u need to give path to the file

you can do in MM module, with messages… there are two parts… the server side (node_helper) whose messages (console.log) come out on the same terminal window
the browser side (modulename.js) uses Log.log. and displays only in the developer window

I have modified a logging module that will display them together on the terminal window

https://github.com/sdetweil/MMM-Logging
install this as the FIRST module in the list
use this definition in config.js

		{
            module: 'MMM-Logging',
            disabled: false,
            config: {
                // Module functions out of the box with nothing set here.
                // See below for configurable options.
                echoLocal: true, 
                echoRemote: true,
                overwriteBrowserMethods: true,
                format: "{{message}} ({{folder}}/{{file}}:{{line}} {{method}})",
            }
        },

[Perlchamp]

thanks a lot, i will try to “play” with it. can take some time …

[sdetweil]

@Perlchamp ok, if you are trying to use the csv-> somethign libraries and installed them in you module folder, then u want to be IN that folder to run your sample node xxx.js tests so the module folder path is right for require()

[Perlchamp]

@sdetweil said in read csv-data and put it in an array:

u want to be IN that folder

you mean in my module folder? it’s called “MMM-birthdaylist” …

[sdetweil]

@Perlchamp correct

cd ~/MagicMirror/modules/MMM-birthdaylist
node xxx.js

note xxx.js can’t do anything specifically MagicMirror related no module register no sendSocketNotification

[Perlchamp]

ok, thanks a lot sam :-)
no i will try to play with it.