Read the statement by Michael Teeuw here.
ipWhitelist HowTo
-
@xer0design verry nice thx!
-
This post is deleted! -
@mochman I have put “/24” in my ipWhitelist. Looking around the forum, I’ve seen that “/120” might help. What I have now seems to be working for my devices, so is there a difference between “/24” and “/120” that I should know about? Which is better?
-
@AAPS If /24 is working for you then stick with it. The /120 just allows less IPs the ability to access your mirror.
If you aren’t forwarding your pi’s ports outside your local network it really shouldn’t matter.
-
Hi all, anybody else having trouble accessing the mirror remotely? I have reinstalled mm (development branch and nodejs v7.7.3), default config. only added allow access from my “lan”.
The mirror shows up on the local screen, so it works.Mirrors IP: 10.0.0.112/24
ipWhitelist: ["::ffff:10.0.0.1/120", "127.0.0.1", "::ffff:127.0.0.1", "::1"],
Still I get
0|mm | Access denied to IP address: 10.0.0.99
In the log.
My client IP: 10.0.0.99/24
Just to be sure, here is my full config:
/* Magic Mirror Config Sample * * By Michael Teeuw http://michaelteeuw.nl * MIT Licensed. */ var config = { port: 8080, ipWhitelist: ["::ffff:10.0.0.1/120", "127.0.0.1", "::ffff:127.0.0.1", "::1"], language: "en", timeFormat: 24, units: "metric", modules: [ { module: "alert", }, { module: "updatenotification", position: "top_bar" }, { module: "clock", position: "top_left" }, { module: "calendar", header: "US Holidays", position: "top_left", config: { calendars: [ { symbol: "calendar-check-o ", url: "webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics" } ] } }, { module: "compliments", position: "lower_third" }, { module: "currentweather", position: "top_right", config: { location: "New York", locationID: "", //ID from http://www.openweathermap.org appid: "YOUR_OPENWEATHER_API_KEY" } }, { module: "weatherforecast", position: "top_right", header: "Weather Forecast", config: { location: "New York", locationID: "5128581", //ID from http://www.openweathermap.org appid: "YOUR_OPENWEATHER_API_KEY" } }, { module: "newsfeed", position: "bottom_bar", config: { feeds: [ { title: "New York Times", url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml" } ], showSourceTitle: true, showPublishDate: true } }, ] }; /*************** DO NOT EDIT THE LINE BELOW ***************/ if (typeof module !== "undefined") {module.exports = config;}
Everything is default, no modules installed… What am I missing?!
-
Have you tried adding
"10.0.0.1/24"
to the list since it looks like your client is using an IPv4 connection? -
@mochman Hmm… Clearly I have missunderstood something. I thought this: “::ffff:10.0.0.1/120” was to allow my 10.0.0.x network to access, I have used that from the beginning and it has worked. But yesterday it stopped working. So I added as you suggested “10.0.0.1/24” and it works… So, Thank you! :)
In the instructions in the first post, it’s suppose to be “::ffff:10.0.0.1/120” for a full C-Net. But… Not any more obviously. :)
Thanks again! I’m all happy now!
-
It looks like your raspberry pi started using IPv4 instead of IPv6. the
::ffff:
before your ip shows that it’s trying to use a IPv6. That’s where"::ffff:10.0.0.1/120"
was working. Seems like something changed though that it’s now using the IPv4 address.
So to cover all your bases, keep both"::ffff:10.0.0.1/120"
and"10.0.0.1/24"
in and you shouldn’t run into this problem again. -
@mochman Will do, thank you, no idea what changed the behavior. :) But at least I have a totally fresh install now! :)
-
Hi @mochman !! I can access from the same device where I run the MM, but can’t access from external devices (smartphone ie)
Any idea why?Kind regards