[MMM-Remote-Control] Can not access remote control module

[motdog]

@Mykle1 its weird. I have a working config. I add the module exactly as you have it, I follow the directions and it doesn’t work. I have tried adding my phone IP into the whitelist area, doesn’t work. I followed the directions from the video which match your suggestion of

var config = {
   address: "0.0.0.0",
   port: 8080,
   ipWhitelist: [],
   

and still nothing. The crazy thing is I somehow got it working once before. then i had to rebuild my config and here I am.

[Mykle1]

@motdog said in [MMM-Remote-Control] Can not access remote control module:

then i had to rebuild my config and here I am.

Ok, just to be sure. You rebuilt your config and now MM errors at startup, telling you to create a config? Perhaps the error is generated by something else in your config. Please post your entire config.js file here, in a code block, so that all can see it. This way, any errors will be noticed more quickly.

Or, make a copy of the config.js.sample and rename the copy to config.js. This will get you up and running again. Then you can add one module entry at a time, saving each time you are successful. When an addition fails, you know where the problem is.

[motdog]

@Mykle1 my bad. I am confusing on this. I did a fresh reboot of the whole thing using Jesse instead of Raspian stretch and don’t have the start up issues. I rebuilt the config like I wanted with all of the modules working good. I then add the remote module and change the address etc and get the please make a config file error. As soon as I remove the remote control info things work again. So I know the error comes when I add this module. The frustrating thing is at a previous point I was able to get the remote control module working. That’s why I am confused but here is my working config without remote control.

Thanks for your patience with me on this

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "en",
	timeFormat: 12,
	units: "imperial",

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			position: "top_left",
			config: {
				calendars: [
					
{
						symbol: "calendar-check",
						url: "http://kuathletics.com/calendar.ashx/calendar.ics?sport_id=4&schedule_id=0&_=dd9bfb6f-df5f-4a47-9975-dd3bb74bd06a"
					},

					{
						symbol: "calendar-check",
						url: "https://calendar.google.com/calenxxxxxxxxxxx7495e80bc22/basic.ics"
					},

					{
						symbol: "calendar-check",
						url: "http://ical-cdn.tex3xxxxxxxxxx4e056117.ics"
					},

					{
						symbol: "calendar-check",
						url: "http://ical-cdn.teamsnap.com/team_schedule/xxxxxxxxxxa68b.ics"
					}
				]
			}
		},

		{
			module: "compliments",
			position: "lower_third"
		},

			{
	        module: 'MMM-NOAA3',
		position: 'bottom_left',
	        config: {
			    provider: "darksky", 
			    apiKey: "6462c3f6d7c6dxxxxx311",         
			    airKey: "WZzmCBxxxxxmBM",    
		        css: "NOAA4",                    
			userlat: "x8.7xx9",  
		        userlon: "-x0.5xx" 
	 }
         },



		{
			  module: "MMM-NowPlayingOnSpotify",
			  position: "bottom_right",
			
			  config: {
			    clientID: "85d8bxxxxxxx",
			    clientSecret: "e6b226e4b819xxxxxx",
			    accessToken: "Bxxxi-UItbKL3NR1dQXpC8sJ1041J5NjVeafoAb3fGVsicRUataJodmfa1urp0akDwThbo",
			    refreshToken: "AQBP1w70KP5TqlxiFNgA4RU6mdTct0AHb58nasw2sEpl17iIz-uPDq9M0ifITQcOxxxxxx"
			  }
},



		{
			  module: "MMM-MyScoreboard",
			  position: "top_right",
			  classes: "default everyone",
			  header: "My Scoreboard",
			  config: {
			    showLeagueSeparators: true,
			    colored: true,
			    viewStyle: "mediumLogos",
			    sports: [
			      {
			        league: "NHL",
			        teams: ["STL"]
			      },
			      {
			        league: "NBA",
			        teams: ["BOS", "GS", "HOU", "PHI"],
			        
			      },
			      {
			        league: "MLB",
				teams: ["STL"]
			        
			      },
			      {
			        league: "NFL",
			        
			      },
				
				
			      {
			        league: "NCAAM",
			        groups: ["Top 25"]
			      }
			   
			    ]
			
			  }
			},



		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "New York",
				locationID: "",  //ID from http://bulk.openweathermap.org/sample/; unzip the gz file and find your city
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "New York",
				locationID: "5128581",  //ID from https://openweathermap.org/city
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

[sdetweil]

@motdog whenever you get the ‘create a config file’ error, run

npm run check:config

and work thru the errors from the top down

[Mykle1]

@motdog

I went and installed MMM-Remote-Control on a laptop running ubuntu and MM v2.5.0. I used this config entry:

The module loads (bottom right):

I’ll send a picture from my other machine. brb

[Mykle1]

@motdog

You can clearly see that it is working remotely.

It would not allow connection with address: "localhost",. Take your working config and carefully add my entry for Remote-Control, address and ipWhitelist It should work.

[motdog]

@Mykle1 Awesome! Thanks so much for your help.

[Mykle1]

@motdog

So, does that mean that it’s working for you now? If so, mark the topic as solved.

[AshDarko]

Hi, i too have the same issue. I have changed my router IP to be something other than 192.XXX.X.XX

Could this be the problem? I can access via browser on the Pi…?

When i run the remote in browser on the pi, i notice in terminal this message:

MMM-Remote-Control customMenu Requested, but file:/home/pi/MagicMirror/config/custom_menu.json was not found

i receive an “Access Denied to IP address 10.100.10.1” in terminal and a message on m y phone saying the device is not allowed to access your mirror

Here is config code:

address: "0.0.0.0", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: [ "127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:10.100.10.0/24",], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "en",
	timeFormat: 24,
	units: "metric",

And here is my module code:

{
		module: 'MMM-Remote-Control',
		/**position: 'bottom_left',**/
		config: {
			customCommand: {},  // Optional, See "Using Custom Commands" below
			customMenu: "custom_menu.json", // Optional, See "Custom Menu Items" below
			showModuleApiMenu: true, // Optional, Enable the Module Controls menu
			/**apiKey: "",         // Optional, See API/README.md for details**/
		}
	},

The module code is pretty much the defaults.

[AshDarko]

I have just commented out the custom menu for now, so ignore that terminal message about it

{
		module: 'MMM-Remote-Control',
		/**position: 'bottom_left',**/
		config: {
			customCommand: {},  // Optional, See "Using Custom Commands" below
			/**customMenu: "custom_menu.json", // Optional, See "Custom Menu Items" below**/
			showModuleApiMenu: true, // Optional, Enable the Module Controls menu
			/**apiKey: "",         // Optional, See API/README.md for details**/
		}
	},