Read the statement by Michael Teeuw here.
Finally finished
-
Nice work. More pictures and details please
-
@yawns said in Finally finished:
More pictures and details please
Yeah, I’d like a story, too. And, at the very least, the dimensions and type of mirror glass you used and where you purchased it. (planning my next mirror) :-)
-
This post is deleted! -
This post is deleted! -
@johnnyboy said in Finally finished:
Lets hope support for MM lasts eh?
By then, “you’ll” be the support.
-
So here’s a break down I used a 19" insignia tv monitor
The mirror is a two way smart mirror from http://www.twowaymirrors.com/smart-mirror/The receptacle I used was a combo USB outlet. Is runs 5v 3.6a and powers the tv
Raspberry pi3 to run magic mirror
Pir sensor from adafruit
https://www.adafruit.com/product/189I used a three gang outlet box and since I only needed two spaces it allowed me to use a blank insert to mount the pir sensor in.
As for the leviton USB outlet I spliced into an outlet I had already installed I spliced into it to run the wires to a gang box behind the mirror. Leaving a seamless look.
I made the frame from poplar wood and stained it in ebony color
As for modules
I am using Wunderground
Random quotes
Flikr
Compliments
Date timeI kept it simply because i am really new at this but overall I love it
Sorry I don’t have more pics I didn’t even think about taking any during the process
-
@bluecaka69 said in Finally finished:
Sorry I don’t have more pics I didn’t even think about taking any during the process
Again, nice work! take more pictures on your next build. You know you’re gonna build another one.
-
@Mykle1 Is that glass or acrylic? And, 6mm or 3mm?
-
@Mykle1 this is what I got it is glass and 1/4 in (6mm)
http://www.twowaymirrors.com/product/14x18-smart-mirror-sanded-edges/
-
This post is deleted! -
@johnnyboy it was rather simply. I used https://github.com/paviro/MMM-PIR-Sensor
To run it just remember to use bcm numbering instead of gpio numbering
I did extend the wires and I used a ferrite bead to ensure there would be no interference…
Since me tv doesn’t have a true power saving I used
https://github.com/phrazelle/mm-pir-hide-allTo create the illusion it shuts off basically turns the screen black until the pir senses motion
-
This post is deleted! -
@johnnyboy works as expected it is sensitive but there are adjustments on the back of the unit I have my sentivity just a smidge past minimum
-
@bluecaka69 said in Finally finished:
Magic mirror is complete and hanging!!! Ran
electric wires to plug in behind the mirror to conceal them. Then I integrated the motion sensor into the gang box so you really don’t see it!! Overall I love it
photoLooks gorgeous! Awesome wood, I love the dark color. :)
Whats the exact glas-size you ordered for the mirror? You mentioned a 19" monitor, so my question basically is how much bigger the mirror glas is.
-
@Timeeee I used a 18x14 glass it’s a the 19 in monitor is about 17.5 inches long so it’s a nice clean yet tight fit
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login