Read the statement by Michael Teeuw here.
MMM-awesome-alexa
-
@g_nandagpl Thank you for the feedback, glad you got this working
As for visualization, it turned out really laggy on Raspberry Pi, so I postponed it
I might re-visit this feature, maybe figure out a way to speed it up if there is enough interest
-
@dolanmiu OH there’s interest. I"m using a real computer to run mine so not an issue :)
-
@cowboysdude thanks for the scripts! I’m trying to run auth_code.sh but I get the following errors, and no code to put in auth_code2.sh:
Can’t locate URI/Escape.pm in @INC (you may need to install the URI::Escape module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/arm-linux-gnueabihf/perl5/5.20 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .).
BEGIN failed–compilation aborted.
Can’t locate URI/Escape.pm in @INC (you may need to install the URI::Escape module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/arm-linux-gnueabihf/perl5/5.20 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .).
BEGIN failed–compilation aborted.
Can’t locate URI/Escape.pm in @INC (you may need to install the URI::Escape module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/arm-linux-gnueabihf/perl5/5.20 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .).
BEGIN failed–compilation aborted.
/usr/bin/xdg-open: 1: eval: www-browser: not found
/usr/bin/xdg-open: 1: eval: links2: not found
/usr/bin/xdg-open: 1: eval: elinks: not found
/usr/bin/xdg-open: 1: eval: links: not found
/usr/bin/xdg-open: 1: eval: lynx: not found
/usr/bin/xdg-open: 1: eval: w3m: not found
xdg-open: no method available for opening ‘https://www.amazon.com/ap/oa?client_id=[removed my client id]&scope=&scope_data=&response_type=code&redirect_uri=’Any ideas what could be wrong?
-
@jnstnr Yes I may have an idea…
open up both sh files and using your keyboard replace all the double quotes … for some reason they do not copy well. I did that and it ran great! :)
-
@cowboysdude just got home and tried it, replaced all " with ’
And now I get another error:
pi@raspberrypi:~ $ bash auth_code.sh
auth_code.sh: line 10: syntax error near unexpected token(' auth_code.sh: line 10:perl -MURI::Escape -ne ‘chomp;print uri_escape($_),’\n’‘’Pretty sure there’s a simple fix for line 10, but haven’t figured it out yet!
-
Scratch that, finally managed to get a refresh token! Added it to the config and getting a black screen now though :/
-
-
@cowboysdude Thanks. I managed to get this up and running, now trying to tackle my USB mic :) this isn’t the easiest module to get working!
But thanks for all your help, you’re doing great work for the magic mirror community
-
@jnstnr Thanks. Did you see the Troubleshoot section here:
https://github.com/dolanmiu/MMM-awesome-alexa
Perhaps that will help! :)
-
@jnstnr Yeah, sorry for the complexity! I tried hard to make this as easy as possible
But due to the nature of this project, there are a lot of variables. Everyones machine and setup is different etc
-
@dolanmiu no worries, I totally understand that it’s quite complicated
-
@jnstnr said in MMM-awesome-alexa:
@cowboysdude just got home and tried it, replaced all " with ’
And now I get another error:
pi@raspberrypi:~ $ bash auth_code.sh
auth_code.sh: line 10: syntax error near unexpected token(' auth_code.sh: line 10:perl -MURI::Escape -ne ‘chomp;print uri_escape($_),’\n’‘’Pretty sure there’s a simple fix for line 10, but haven’t figured it out yet!
Hi, what was you fix? Thanks
-
@smyvy I went to this url:
https://sakirtemel.github.io/MMM-alexa/Put in the Client Id, Device ID & set serial number as 1234. I also added the above url as an allowed return url in the Amazon developer console before I clicked the “Request code” button.
-
This post is deleted! -
@smyvy the config that’s included in the mmm-awesome-alexa repo wasn’t working for me, so I adjusted it to make it look like other modules in my config. here’s my setup, I was actually missing a comma after the closing }, which fixed the black screen:
{
module: ‘MMM-awesome-alexa’,
position: “bottom_bar”,
config: {
wakeWord: “Alexa”,
clientId: “amzn1…”,
clientSecret: “…”,
deviceId: “magicmirror”,
refreshToken: “…”,
lite: false
}
}, -
@g_nandagpl please share images of the visualisation, if any.
-
@g_nandagpl is it possible to send notifications or load modules through voice?
-
@g_nandagpl Visualization is now done! It looks like a talking/breathing circle, kind of like cortana.
-
@dolanmiu Thanks for the visualisation.
-
Has anyone run into this problem:
Error: Cannot find module ‘/home/pi/MagicMirror/modules/MMM-awesome-alexa/node_modules/snowboy/lib/node/binding/Release/electron-v1.4-linux-arm/snowboy.node’
at Module._resolveFilename (module.js:455:15)
at Function.Module._resolveFilename (/home/pi/MagicMirror/node_modules/electron/dist/resources/electron.asar/common/reset-search-paths.js:35:12)Happens when I try to run my mirror with MMM-awesome-alexa.
Thanks,
James
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login