Read the statement by Michael Teeuw here.
[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras
-
@cr4z33 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:
With omxplayer stream switching is almost OK if it wasn’t that it doesn’t select the wanted stream.
I can’t replicate this issue. Directly sending notifications: of the form
notification: "RTSP-PLAY", payload: "streamX"works as expected and switches to the correct stream when usingautoStart: false, rotateStreams: true, rotateStreamTimeout: 0.How many streams do you have again? Is it less than 10?
@cr4z33 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:
With vlc it’s a mess as multiple streams ALWAYS start at the same time after a voice command.
I think this is related to the fact that VLC doesn’t close the streams automatically when switching, it puts the window in the background until it times out, then it closes. Try adding a
shutdownDelay: 0to your module config to make the VLC stream close immediately on hiding. Same thing with omxplayer though, switching appears to work as expected on my end.Please also make sure you have the latest version of PM2:
sudo npm install -g pm2 -
did develop update now, both streams are on stop and error messages :(
PM2 | App [omx_stream2:1] online 0|mm | Initializing new module helper ... 0|mm | Module helper loaded: newsfeed 2|omx_stream1 | * failed to add service - already in use? 2|omx_stream1 | Video codec omx-mjpeg width 352 height 288 profile -99 fps 30.000000 2|omx_stream1 | Subtitle count: 0, state: off, index: 1, delay: 0 2|omx_stream1 | /usr/bin/omxplayer: Zeile 67: 1221 Abgebrochen (Speicherabzug geschrieben) LD_LIBRARY_PATH="$OMXPLAYER_LIBS${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}" $OMXPLAYER_BIN "$@" PM2 | App [omx_stream1:2] exited with code [134] via signal [SIGINT] PM2 | App [omx_stream1:2] starting in -fork mode- PM2 | App [omx_stream1:2] online 1|omx_stream2 | * failed to add service - already in use? 1|omx_stream2 | Video codec omx-mjpeg width 352 height 288 profile -99 fps 30.000000 1|omx_stream2 | Subtitle count: 0, state: off, index: 1, delay: 0 1|omx_stream2 | /usr/bin/omxplayer: Zeile 67: 1244 Abgebrochen (Speicherabzug geschrieben) LD_LIBRARY_PATH="$OMXPLAYER_LIBS${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}" $OMXPLAYER_BIN "$@" PM2 | App [omx_stream2:1] exited with code [134] via signal [SIGINT] PM2 | App [omx_stream2:1] starting in -fork mode- PM2 | App [omx_stream2:1] online 2|omx_stream1 | * failed to add service - already in use? 2|omx_stream1 | Video codec omx-mjpeg width 352 height 288 profile -99 fps 30.000000 2|omx_stream1 | Subtitle count: 0, state: off, index: 1, delay: 0 2|omx_stream1 | /usr/bin/omxplayer: Zeile 67: 1287 Abgebrochen (Speicherabzug geschrieben) LD_LIBRARY_PATH="$OMXPLAYER_LIBS${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}" $OMXPLAYER_BIN "$@" PM2 | App [omx_stream1:2] exited with code [134] via signal [SIGINT] PM2 | App [omx_stream1:2] starting in -fork mode- PM2 | App [omx_stream1:2] online 0|mm | Initializing new module helper ... 0|mm | Module helper loaded: MMM-RTSPStream 0|mm | All module helpers loaded. 0|mm | Starting server on port 8080 ... 0|mm | Server started ... 0|mm | Connecting socket for: updatenotification 0|mm | Connecting socket for: MMM-Fuel 0|mm | Starting module helper: MMM-Fuel 0|mm | Connecting socket for: newsfeed 0|mm | Starting module: newsfeed 0|mm | Connecting socket for: MMM-RTSPStream 0|mm | PM2: Stopping all OMXPlayer Streams... 0|mm | Sockets connected & modules started ... 1|omx_stream2 | * failed to add service - already in use? 1|omx_stream2 | Video codec omx-mjpeg width 352 height 288 profile -99 fps 30.000000 1|omx_stream2 | Subtitle count: 0, state: off, index: 1, delay: 0 1|omx_stream2 | /usr/bin/omxplayer: Zeile 67: 1320 Abgebrochen (Speicherabzug geschrieben) LD_LIBRARY_PATH="$OMXPLAYER_LIBS${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}" $OMXPLAYER_BIN "$@" PM2 | App [omx_stream2:1] exited with code [134] via signal [SIGINT] PM2 | App [omx_stream2:1] starting in -fork mode- PM2 | App [omx_stream2:1] online 2|omx_stream1 | * failed to add service - already in use? 2|omx_stream1 | Video codec omx-mjpeg width 352 height 288 profile -99 fps 30.000000 2|omx_stream1 | Subtitle count: 0, state: off, index: 1, delay: 0 2|omx_stream1 | /usr/bin/omxplayer: Zeile 67: 1349 Abgebrochen (Speicherabzug geschrieben) LD_LIBRARY_PATH="$OMXPLAYER_LIBS${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}" $OMXPLAYER_BIN "$@" PM2 | App [omx_stream1:2] exited with code [134] via signal [SIGINT] PM2 | App [omx_stream1:2] starting in -fork mode- PM2 | App [omx_stream1:2] online 1|omx_stream2 | * failed to add service - already in use? 1|omx_stream2 | Video codec omx-mjpeg width 352 height 288 profile -99 fps 30.000000 1|omx_stream2 | Subtitle count: 0, state: off, index: 1, delay: 0 1|omx_stream2 | /usr/bin/omxplayer: Zeile 67: 1399 Abgebrochen (Speicherabzug geschrieben) LD_LIBRARY_PATH="$OMXPLAYER_LIBS${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}" $OMXPLAYER_BIN "$@" PM2 | App [omx_stream2:1] exited with code [134] via signal [SIGINT] PM2 | App [omx_stream2:1] starting in -fork mode- PM2 | App [omx_stream2:1] online 2|omx_stream1 | * failed to add service - already in use? 2|omx_stream1 | Video codec omx-mjpeg width 352 height 288 profile -99 fps 30.000000 2|omx_stream1 | Subtitle count: 0, state: off, index: 1, delay: 0 2|omx_stream1 | /usr/bin/omxplayer: Zeile 67: 1422 Abgebrochen (Speicherabzug geschrieben) LD_LIBRARY_PATH="$OMXPLAYER_LIBS${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}" $OMXPLAYER_BIN "$@" PM2 | App [omx_stream1:2] exited with code [134] via signal [SIGINT] PM2 | App [omx_stream1:2] starting in -fork mode- PM2 | App [omx_stream1:2] online 0|mm | Launching application. 0|mm | libGL error: MESA-LOADER: failed to retrieve device information ^C pi@raspberrypi:~ $ pm2 status ┌─────────────┬────┬──────┬────────┬─────────┬─────┬────────┬──────────┐ │ Name │ id │ mode │ status │ ↺ │ cpu │ memory │ ├─────────────┼────┼──────┼────────┼─────────┼─────┼────────┼──────────┤ │ mm │ 0 │ N/A │ fork │ online │ 0 │ 0% │ 2.5 MB │ │ omx_stream1 │ 2 │ N/A │ fork │ stopped │ 9 │ 0% │ 0 B │ │ omx_stream2 │ 1 │ N/A │ fork │ stopped │ 9 │ 0% │ 0 B │ └─────────────┴────┴──────┴────────┴─────────┴─────┴────────┴──────────┘ Use `pm2 show <id|name>` to get more details about an app pi@raspberrypi:~ $can you undo that somehow?
-
@djuscha said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:
both streams are on stop and error messages
This looks like the same error I got when I tried to use omxplayer with the OpenGL driver enabled inraspi-config. You’ll have to use the legacy driver if you want to use omxplayer on the most recent version of Raspbian.EDIT 10-Jan-19: Use the latest
developbranch version. omxplayer requires the--no-osdflag to work properly with the OpenGL (Fake KMS) driver. -
@shbatm I can confirm that I followed the whole instructions properly and I am using
notification: "RTSP-PLAY", payload: "streamX"indeed for my 7 different streams (so yes less than 10).All I can say is that it is NOT working as intended. :winking_face:
Anyway I always forgot to post the (latest version) PM2 log so here it is if you can find anything helpful?
I wish I could do more, but again I am not skilled enough sorry… :smiling_face_with_open_mouth_cold_sweat: -
@cr4z33 @evroom the last things I can suggest to try:
- @Cr4z33 Make sure you have
autoStart: falsein your config. @evroom yours should betrue. - Update the module one more time:
cd ~/MagicMirror/modules/MMM-RTSPStream git fetch --al && git pull rm -R node_modules/ npm install- Nuke and update your pm2:
pm2 kill rm ~/.pm2/dump.pm2 sudo npm i -g pm2- Restart the MM script (you’ll have to redo
pm2 saveBEFORE you run any streams if you want the MM to start on boot).
- @Cr4z33 Make sure you have
-
@shbatm I feel sorry, but nothing has improved. :disappointed_face:
-
@shbatm
Performed all steps.
No change: no stream is started (nothing in the pm2 logs).Then deleted the MMM-RTSPStream module completely.
Rebooted.
Installed the module again.
No change: no stream is started (nothing in the pm2 logs).Then performed all steps to get in the develop branch.
No change: no stream is started (nothing in the pm2 logs).I ended up disabling the module and running a script under pm2 control.
Pity, it worked just fine till I started to test the changes.
The ‘pm2 delete omx_stream1’ was the final blow, but should not be the reason for a stream not to appear again.Perhaps a complete re-install of MM is necessary, but that is too much work for now.
Should I be forced to do so in the future, I will give MMM-RTSPStream a try again. -
@cr4z33 Can you please post (or send in chats) your current config. I’m curious if we’re missing something obvious.
@evroom I’m sorry you can’t get it working again. I’m at a loss as to why it’s not starting the streams properly. Everything in your config you sent looks like it should be working from the module’s end. The only thing I can think of is something else is interfering and preventing the module from starting. (Would show up as a “MMM-RTSPStream is suspended…” in the DevTools (web browser) console logs.
-
@evroom I’m sorry but I haven’t read too far back in the posts but have you tried disabling your other modules to determine if there’s a conflict somewhere?
The reason I ask is because shbatm helped me recently with everything setup correctly but stream not displaying. One of the issues turned out to be the GoogleMapsTraffic module. Just wanted to mention that just in case. Good luck!
-
