Read the statement by Michael Teeuw here.
Complete Walkthrough - Install MagicMirror on a PC - Windows 7/10
-
-
S sdetweil referenced this topic on
-
@Mykle1 First off, thanks so much for a great guide. I’m having what is likely a simple issue, but I can’t figure out how to resolve it. I am getting the following error message with the npm start command. Not concerned about the warnings, but how do resolve the DISPLAY issue?
$ npm start npm WARN config global `--global`, `--local` are deprecated. Use `--location=global` instead. > magicmirror@2.20.0 start > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js 'DISPLAY' is not recognized as an internal or external command, operable program or batch file. cliff@BNC-LAB01 MINGW64 ~/MagicMirror (master) $ -
@Cliff365 see the end of the post I just linked to in the prior post
also, do not run under mingw… just cmd.exe
-
@Mykle1 Thanks for your help on the DISPLAY issue. I changed the line in packages.json file to:
“start”: “node_modules/.bin/electron js/electron.js”,
I get the following error message back:
> magicmirror@2.20.0 start > node_modules/.bin/electron js/electron.js 'node_modules' is not recognized as an internal or external command, operable program or batch file. -
@Cliff365 you didn’t follow all of the last line of
https://forum.magicmirror.builders/topic/4089/complete-walkthrough-install-magicmirror-on-a-pc-windows-7-10/225?_=1660158299123ps, I’m not @Mykle1
-
@sdetweil Oops! Thanks sdetweil
-
Hey! @sdetweil i’ve spend more than 10 hours whit this because i didn’t read the entire thread. I’ve finally installed mm2 on a 32bit laptop whit w7 and node v16.6 but when i run npm start i just got a black screen. any ideas on how to find a solution? my cmd here:
[08.01.2023 06:58.14.001] [LOG] Starting MagicMirror: v2.22.0 [08.01.2023 06:58.14.151] [LOG] Loading config ... [08.01.2023 06:58.14.201] [LOG] Loading module helpers ... [08.01.2023 06:58.14.231] [LOG] No helper found for module: alert. [08.01.2023 06:58.14.361] [LOG] Initializing new module helper ... [08.01.2023 06:58.14.371] [LOG] Module helper loaded: updatenotification [08.01.2023 06:58.14.395] [LOG] No helper found for module: clock. [08.01.2023 06:58.17.473] [LOG] Initializing new module helper ... [08.01.2023 06:58.17.477] [LOG] Module helper loaded: calendar [08.01.2023 06:58.17.497] [LOG] No helper found for module: compliments. [08.01.2023 06:58.17.497] [LOG] No helper found for module: weather. [08.01.2023 06:58.17.839] [LOG] Initializing new module helper ... [08.01.2023 06:58.17.839] [LOG] Module helper loaded: newsfeed [08.01.2023 06:58.17.849] [LOG] No helper found for module: facts. [08.01.2023 06:58.17.849] [LOG] All module helpers loaded. [08.01.2023 06:58.19.559] [LOG] Starting server on port 8080 ... [08.01.2023 06:58.23.451] [LOG] Launching application. [08.01.2023 06:58.29.838] [LOG] Server started ... [08.01.2023 06:58.29.848] [LOG] Connecting socket for: updatenotification [08.01.2023 06:58.29.848] [LOG] Starting module helper: updatenotification [08.01.2023 06:58.29.848] [LOG] Connecting socket for: calendar [08.01.2023 06:58.29.848] [LOG] Starting node helper for: calendar [08.01.2023 06:58.29.858] [LOG] Connecting socket for: newsfeed [08.01.2023 06:58.29.858] [LOG] Starting node helper for: newsfeed [08.01.2023 06:58.29.858] [LOG] Sockets connected & modules started ... [3460:0108/070022.937:ERROR:gpu_init.cc(523)] Passthrough is not supported, GL i s disabled, ANGLE is -
@dude31222 never tried win7 myself… this topic was created a while ago…
you can TRY setting an environment variable in the cmd.exe window before executing npm start
cd MagicMirror set ELECTRON_DISABLE_GPU=1 npm start -
@sdetweil still having an empty screen but no more error messages in cmd
-
@dude31222 that usually means u didn’t do the fonts install step or vendor install step
those are extra for windows install
-
@sdetweil i did. Now i’ve upgraded to windows 8.1. still a black screen but a new error```
[0110/062053.181:ERROR:_trace_logging_minimal.win.cc<78>] provider resistration failure -
@dude31222 I don’t know. those are so far out of service…
-
Heyo!
I’ve done a fresh install of MM2 (on Win10), and now I’m struggling with the blank electron screen.I did the vendor and font install, changed the package.json to
"start":"node_modules/.bin/electron js/electron.js",according to the guide on page 15, and now I’m getting
bash: line 1: node_modules.binelectron: command not foundon npm start, doesn’t start up MM.
-
@Reila you did not do the package.json edit correctly.
windows uses slashes leaning left
and u need 2 in each place
node-modules\\.bin\\electron js\\electron.js -
@sdetweil
Oh, I just copied as it was! It might have been a different guide, it was old after all… I see the backward slashes in a later post now.So now I tried
"start": "node_modules\\.bin\\electron js\\electron.js",(with both the double and single space, just in case) and it’s giving me the same error still.
I tested changing the start-dev variant too.
I must be missing another step still. -
@Reila I am away from my system at the moment be back in an hour or so.
what does npm -v say?
-
@sdetweil No problem! Browser version works fine for tinkering in the meantime :)
npm is 8.17.0
-
@Reila hm… this is what mine is set to
"start": "node_modules\\.bin\\electron js\\electron.js",and I don’t get any errors, but electron starts full screen, black screen
but if I open edge and go to localhost:8080 it looks great and if I open electron
(the 1st part, node_modules\.bin\electron) and go to http://localhost:8080
it works… -
R Roadrunner451 referenced this topic on
-
hi i need some help here. when i ran npm start, im getting this message.
Starting MagicMirror: v2.23.0
[28.06.2023 13:36.52.647] [LOG] Loading config …
[28.06.2023 13:36.52.648] [DEBUG] config template file not exists, no envsubst
[28.06.2023 13:36.52.650] [LOG] Loading module helpers …
[28.06.2023 13:36.52.650] [LOG] No helper found for module: alert.
[28.06.2023 13:36.52.655] [LOG] Initializing new module helper …
[28.06.2023 13:36.52.655] [LOG] Module helper loaded: updatenotification
[28.06.2023 13:36.52.656] [LOG] No helper found for module: clock.
[28.06.2023 13:36.52.717] [LOG] Initializing new module helper …
[28.06.2023 13:36.52.717] [LOG] Module helper loaded: calendar
[28.06.2023 13:36.52.718] [LOG] No helper found for module: compliments.
[28.06.2023 13:36.52.718] [LOG] No helper found for module: weather.
[28.06.2023 13:36.52.732] [LOG] Initializing new module helper …
[28.06.2023 13:36.52.733] [LOG] Module helper loaded: newsfeed
[28.06.2023 13:36.52.733] [LOG] All module helpers loaded.
[28.06.2023 13:36.52.737] [LOG] Starting server on port 8080 …
[28.06.2023 13:36.52.779] [LOG] Launching application.
[28.06.2023 13:36.52.812] [LOG] Server started …
[28.06.2023 13:36.52.818] [LOG] Connecting socket for: updatenotification
[28.06.2023 13:36.52.818] [LOG] Starting module helper: updatenotification
[28.06.2023 13:36.52.818] [LOG] Connecting socket for: calendar
[28.06.2023 13:36.52.819] [LOG] Starting node helper for: calendar
[28.06.2023 13:36.52.819] [LOG] Connecting socket for: newsfeed
[28.06.2023 13:36.52.819] [LOG] Starting node helper for: newsfeed
[28.06.2023 13:36.52.820] [LOG] Sockets connected & modules started …am i supposed to do something next?
-
@1a2a3a there is a big in the release on windows
https://github.com/MichMich/MagicMirror/issues/3083
you can follow the instructions to checkout the develop branch, or wait til July 1 for the next release with the fix
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login