Motion Detector

bhepler

@DirkS Interesting. Following the instructions I found via the GitHub MagicMirror repository, the pm2 should be using /home/pi/mm.sh to start the magic mirror process. Editing this file and appending DEV should give you the web browser console with log.

done

Hi and thanks to everybody making this module work!

@cpramhofer Did your solution solve the issue that the monitor did not switch on again after a longer period of time?

bhepler

@done Wait, does it work for you? Because it’s not working for me and this is the last thing I need before my mirror is done.

done

@bhepler Sorry, I haven’t tried yet. :)
I installed the cam and the module yesterday and motion detection worked.
But I experienced the same issue this morning. Wake up problem is not solved.

strawberry 3.141

@done propably everything is working for you guys and you can just see the screensaver, be sure to disable the screensaver

done

Hi @strawberry-3.141
Thanks for your answer
I disabled the screensaver by editing (found here
Is that what you had in mind?

sudo nano /home/pi/.config/lxsession/LXDE-pi/autostart

@lxpanel --profile LXDE-pi
@pcmanfm --desktop --profile LXDE-pi
#@xscreensaver -no-splash

@xset s off
@xset -dpms
@xset s noblank
@unclutter

Strange that my camera driver was not working today.
I had to activate the cam in the pi config again.

In the morning the cam led was on but when I tried to wake up the monitor the led just turned off.

I use a v1.3 cam on a rpi3.

strawberry 3.141

@done Personally I don’t have a mirror myself, but I heard from other users in this forum they had problems with the screensaver when they tried to wake up the mirror using my voice module. They could see the mirror got brighter, but the screen was still black because of the screensaver. I would connect a mouse or keyboard and do some action to see if there is a screensaver active.

done

@strawberry-3.141 Ok, I’ll give it a try. Tomorrow morning, I will test again. Thx!

bibi

hello! as understood there are 2 topics ongoing here "PIR module of @cowboysdude " and "motiondetector of @alexyak ". I will not ask which is the best module, you both did a great job, thx!
don’t take it bad but i just wanted to have opinions and feedback on which one is running currently without any, less issues please? (i am starting my mirror and don’t want to be too much demanding on the forum if not working - wise ;-))

@cowboysdude : i have already implemented Paviro’s module to test and i wanted to know if i should remove it before installing your one?

Thx in advance for your relpies and have a good day/eve :)

cowboysdude

@bibi said in Motion Detector:

hello! as understood there are 2 topics ongoing here "PIR module of @cowboysdude " and "motiondetector of @alexyak ". I will not ask which is the best module, you both did a great job, thx!
don’t take it bad but i just wanted to have opinions and feedback on which one is running currently without any, less issues please? (i am starting my mirror and don’t want to be too much demanding on the forum if not working - wise ;-))

@cowboysdude : i have already implemented Paviro’s module to test and i wanted to know if i should remove it before installing your one?

Thx in advance for your relpies and have a good day/eve :)

Honestly I will you this… I liked the motion sensor BUT @ianperrin worked out a module scheduler that I liked much better! I can turn modules off and on at specific times and turn it all off when I"m not home only to have it back on again when I arrive home.

All-in-all it really depends on your needs. NOTHING is without issues of some kind. I just really disliked the PIR sensor sticking out …

I hoped this help you in some way.

OH but of course @strawberry-3-141 also made a voice module that you can just tell the mirror to turn off too :) The usb mike is about the same price as a pir sensor!!! It’s REALLY awesome!!!