MMM-xiaomi - Temperature and Humidity from your smarthome

mirko3000

Your first config is correct, I guess you might have made an error somewhere else in your config, I could run your config successfully.

Albert2002

Hmm… I must have had a typo somewhere. Now the config is working for me as well but still no icon.

this is how it works so far:

{
		module: 'MMM-xiaomi',
		position: 'bottom_left',
		header: 'Temperatur / Feuchtigkeit',  // This is optional
		config: {
			gatewayIP: '192.168.2.160',
			gatewayToken: '6ebf9b84e5c615c09268166a99b95f0a',
			showWindow: true,
			rooms: [
			{ name: 'Wohnzimmer', sortOrder: 30, devices : ['158d00015736a8', '158d000119fcb2'] },
					]
			// See 'Configuration options' for more information.
				}
		},

This is what I get:

alt text

mm out:

> magicmirror@2.1.3 start /home/pi/MagicMirror
> sh run-start.sh

Starting MagicMirror: v2.1.3
Loading config ...
Loading module helpers ...
No helper found for module: alert.
No helper found for module: clock.
Initializing new module helper ...
Module helper loaded: calendar
No helper found for module: currentweather.
No helper found for module: weatherforecast.
Initializing new module helper ...
Module helper loaded: MMM-Remote-Control
Initializing new module helper ...
Module helper loaded: MMM-PNews
Initializing new module helper ...
Module helper loaded: newsfeed
Initializing new module helper ...
Module helper loaded: internet-monitor
Initializing new module helper ...
Module helper loaded: MMM-MovieListings
Initializing new module helper ...
Module helper loaded: MMM-Fuel
Initializing new module helper ...
Module helper loaded: MMM-NetworkScanner
Initializing new module helper ...
Module helper loaded: MMM-nasaastropic
Initializing new module helper ...
Module helper loaded: MMM-SystemStats
No helper found for module: MMM-Carousel.
Initializing new module helper ...
Module helper loaded: MMM-Events
Initializing new module helper ...
Module helper loaded: MMM-xiaomi
All module helpers loaded.
Starting server on port 8080 ... 
You're using a full whitelist configuration to allow for all IPs
Server started ...
Connecting socket for: calendar
Starting node helper for: calendar
Connecting socket for: MMM-Remote-Control
Starting node helper for: MMM-Remote-Control
Connecting socket for: MMM-PNews
Starting module: MMM-PNews
Connecting socket for: newsfeed
Starting module: newsfeed
Connecting socket for: internet-monitor
internet-monitor helper started ...
Connecting socket for: MMM-MovieListings
MMM-MovieListing helper started...
Connecting socket for: MMM-Fuel
Starting module helper: MMM-Fuel
Connecting socket for: MMM-NetworkScanner
Starting module: MMM-NetworkScanner
Connecting socket for: MMM-nasaastropic
Starting node helper: MMM-nasaastropic
Connecting socket for: MMM-SystemStats
Connecting socket for: MMM-Events
Starting node_helper for: MMM-Events
Connecting socket for: MMM-xiaomi
Starting xiaomi helper
Sockets connected & modules started ...
Launching application.
Create new calendar fetcher for url: https://calendar.google.com/calendar/ical/basic.ics - Interval: 300000
Create new news fetcher for url: http://www.haz.de/rss/feed/haz_schlagzeilen - Interval: 300000
Create new news fetcher for url: http://www.spiegel.de/schlagzeilen/index.rss - Interval: 300000
starting internet monitor node helper
MMM-NetworkScanner received CONFIG
astro helper: config received
retrieveAndUpdate()
Sat Nov 18 2017 15:55:41 GMT+0100 (CET): Triggering Xiaomi Gateway connect
NASA Astro Pic of the Day URL: https://apod.nasa.gov/apod/image/1711/20171117dawnTezel1200c.jpg
Found device with ID 158d000119fcb2 of type magnet
Found device with ID 158d00015aa973 of type controller
Found device with ID 158d00015736a8 of type sensor

No errors in the log

mirko3000

Note that the icon only appears on open windows - its a white star. If the window is closed you will not see any icon. Also I have noticed that the open state is not really reliable, need to check with miio why there are so many false states sent.

Albert2002

@mirko3000 said in MMM-xiaomi - Temperature and Humidity from your smarthome:

Note that the icon only appears on open windows - its a white star.

That was the point that i’ve missed! when I open the window, the white star appears impatiently! I love this module! Thank you for your work!

mirko3000

Don’t forget to update the npm packages (miio), there is a bugfix which caused wrong close events of the windows. Either ‘npm update’ in the MMM-xiaomi folder, or delete the “node_modules” folder and simply execute ‘npm install’ again.

Albert2002

@mirko3000 said in MMM-xiaomi - Temperature and Humidity from your smarthome:

Don’t forget to update the npm packages (miio), there is a bugfix which caused wrong close events of the windows. Either ‘npm update’ in the MMM-xiaomi folder, or delete the “node_modules” folder and simply execute ‘npm install’ again.

Now I did so. Thank you for the hint!

Albert2002

My new sensors are arrived… I love it! Great work!

alt text

Which lights are supported?

mirko3000

Check your devices here:
https://github.com/aholstenson/miio/blob/master/docs/devices/README.md#models-by-name

As you see not all Yeelights are supported, others are untested. My module retrieves all devices of type ‘light’, so it might work for all of them.

barnosch

hi,

finally my gateway arrived today. Great. it is working after a little struggeling to get the correct App to initally configure the stuff.

I added 4 temp/humidity sensors and i am wondering how to see in the miio discovery whick one is in which room?
Any chance to get that ?
I the app itself i sadly can’t see the IDs of the sensors?

How did you figured this out?

Albert2002

I’ve added them one by one. Remove them all and add them one by one. Or add all of them to the module. Then its easy to discover if you keep one of them somewhere cold, all the other warm. The Id and the temperature will guide you.

trividar

Hi, if i set in the custom css file mmm-xiaomi .xsmall and the text-align: right then the humidity and temerature are going on the right side but the “>” stay. How can I move also “>” to right?
0_1511553569851_6ed2d9f9-a80d-4f0b-8c38-e8dd538d0bd5.jpg

@barnosch I have done it like @Albert2002 described.

THX

barnosch

@trividar
they are not belonging to the same TD so it is not moving aswell.

is it the trending, or what is it good for? i don’t really like it to be honest.

For me it was too close also, i just added some nbsp; to get some spaces between.

thanks for the hints.
i added all the ids and checked in the app, which room is showing the current values and added it to the correct rooms i created in the config.

mirko3000

Yes the identification of the sensors is not really good, did not find a better solution so far.
As for the trend indicators: I pushed a new version where you can disable the trend icons (showTrend: false).

Albert2002

Just want to say that there is no different between the Xiaomi and Aqara Temperature sensor. Both are working like a charm. The only different is that the Aqara shows the Air pressure (in the MiHome app) as well.

@Mirko3000 Thank you for your hard work! You are always improving the module in light-speed!

I was playing around with my Yeelights colorbulbs but I didn’t get it working on MM. Guessing its because of they have they own ID, IP and token. However, thats why am still using the app. :-)

mirko3000

Did you try with the ‘miio --discover’ command line utility? Do the lights show up there?

Albert2002

@mirko3000 said in MMM-xiaomi - Temperature and Humidity from your smarthome:

Did you try with the ‘miio --discover’ command line utility? Do the lights show up there?

Yes I did so with success. I got the ID, IP and token. I had tried to add it like a sensor this way:

config: {
			gatewayIP: '192.168.2.160',
			gatewayToken: '6ebf9b84e5c615c09268166a99b95f0a',
			showWindow: true,
			showVentilation: false,
			minTemperature: false,
			maxHumidity: false,
                        showLights: true
			rooms: [
			{ name: 'Wohnzimmer', sortOrder: 30, devices : ['158d00015736a8', '158d000119fcb2'] },
			{ name: 'Bad', sortOrder: 30, devices : ['158d0001b911b9'] },
			{ name: 'Schlafzimmer', sortOrder: 30, devices : ['158d0001b91177', '158d00011919a3', '56234267'] }, //Bulp ID
			{ name: 'Arbeitszimmer', sortOrder: 30, devices : ['158d0001b9035b'] },
			{ name: 'Draußen', sortOrder: 30, devices : ['158d0001b920bd'] },
					],
				}
		},

and this way:

config: {
			gatewayIP: '192.168.2.160',
			gatewayToken: '6ebf9b84e5c615c09268166a99b95f0a',
			showWindow: true,
			showVentilation: false,
			minTemperature: false,
			maxHumidity: false,
                        showLights: true
			{ name: 'Bad', sortOrder: 30, devices : ['158d0001b911b9'] },
			{ name: 'Schlafzimmer', sortOrder: 30, devices : ['158d0001b91177', '158d00011919a3', ] },
			{ name: 'Arbeitszimmer', sortOrder: 30, devices : ['158d0001b9035b'] },
			{ name: 'Draußen', sortOrder: 30, devices : ['158d0001b920bd'] },
					],
                       gatewayIP: '192.168.2.101', // IP of the bulp
			gatewayToken: 'fd1d31c907fc5506fc379445eb6bd146', // token of the bulp
rooms: [
{ name: 'Flur', sortOrder: 30, devices : ['56234267'] }, // ID of the bulp
               ]


				}
		},

Btw I noticed some behaver am not sure about.
How to get rid of the notification about Humidity?
alt text

Its Full screen and always on the top. Even when the pages changing using MMM-Carousel its still on top.

Using stars as notification for open windows:
When I was gone to bed at night with open window there was a star shown. In the morning still with open window the star was gone. What happens there?

Are there no more indicators for the trent?

alt text

mirko3000

Hmm those Yeelights seem to be quite different, guess it will be hard to implement without having at least one piece on my own…

For the notifications: this is a magic mirror default, so I can’t change the behaviour. In your case you should configure your outside sensor (parameter outsideSensorId), then this will not show any notification. It is mainly used for indoor rooms. I can of course add a config to disable notifications at all.

The window states are not 100% reliable. It seems that sometimes the sensors send wrong values, I need to investigate why this is the case.

To your last question: I disabled the trend indicators by default, but you can re-enable them by setting the config: showTrend: true

mirko3000

Oh and I just fixed an issue with the notifications, they should disappear after 10 seconds, now they do again :)

BTW: please use the issue tracker on github to track issues, this helps other find similar problems:
https://github.com/mirko3000/MMM-xiaomi/issues

Albert2002

@mirko3000 said in MMM-xiaomi - Temperature and Humidity from your smarthome:

Oh and I just fixed an issue with the notifications, they should disappear after 10 seconds, now they do again :)

BTW: please use the issue tracker on github to track issues, this helps other find similar problems:
https://github.com/mirko3000/MMM-xiaomi/issues

Thank you for this! :)
In the future I’ll use the issue tracker.

cowboysdude

Excellent!!! All working.