MMM-xiaomi - Temperature and Humidity from your smarthome

[barnosch]

I have now also the Yeelight Bulbs (Color) but i guess its not working to show the status in the mirror?
or has @Albert2002 managed to get it working?
I also only get a short id beginning with 56 or something wit the miio tool.
I needed to install the Yeelight App in order to get the stuff discovered by the Amazon Echo . With the Mi Home app it was working to stear them, but not recognized in the Amazon App (took me a while to figure that out)

[Albert2002]

It’s still not working for me. I just think those are two different modules we need for. MMM-xiaomi is only for displaying the different Temperature readings and the state of the Windows sensors. And this does pretty well!

I tried Openhub with the Yeelight binding. The idea was to get it on the mirror with mmm-openhabfloorplan
I was only able to see my Yeelights in Openhab and the remote but whitout being able to switch them. Only to make them visible on the mirror its a bit to much effort I think. Maybe I did something wrong.

As far as I understood the most important point is that you have to chose Singapore if you want to control your Yeelignts with Alexa. For Everything else there are a lot to tutorials around.

[mirko3000]

Yes the Yeelights are still not supported, I will need to order one for myself to actually implement that. Should not be an issue, at least the miio library seems to support it. Hope to get it running within the next months…

[garbleflux]

Hi mirko3000

I’m very happy, thank you for the work. Your modul runs excellent, it’s exactly what I want.
Thanks to your good dokumentation, my three xiaomi temperature sensors are working fine, I did order
additional twelfe temperature- und window sensors.
With the miio software, I’ ve got an token for the xiaomi smart hub. Any idea to use it? (chance LED color, etc.)

Is there also a way to set a maximum temperature for warning, so it could be used as an additional fire sensor?

It’s minimal: I’m trying to set the size of the charakters a few points up - with no success in the the css-file.
Can you give me a hint?

Thank you in advance
Mike

[mirko3000]

Hi garbleflux,

happy to hear you like the module! :)

The token for the hub is required for the whole module to work, so I guess you are already using it (directly or via auto-token). If you want to use features of the smart hub, currently I have not implemented anything here. Need to check what the miio lib provides, maybe setting the light colors?

Maximum temperature could be implemented, but I doubt you really want to use this as fire sensor! :) Not much help if your mirror warns you about a fire.

About the character size: I use the default css classes “small” and “xsmall”. You could simply override them for the xiaomi elements via:

.xm-xiaomi .small {
  font-size: 24px;
}

Best regards,
Mirko

[garbleflux]

Hi mirko3000

thank you for your kind reply. No, I dont want to use the xiaomi-sensor as a fire sensor ;-)

But I have a fine storeroom for some goods, so the temperature should be in a range from 14 and 18
degrees celcius. Otherwise I must take the goods and move them in the summertime in the colder
basement. Thats my intention to wish a maximum temperature.

Thanks again for your great work and your support!
Best wishes from Mike

[mirko3000]

Ok got it :) Here you go, added max temperature setting with latest version.

Best regards,
Mirko

[Albert2002]

Am still impressed by your speed and your skill! Thank you for sharing your work with us!

[garbleflux]

Hi Mirko3000,
thank you! Great work.

[pepebc]

Mirko3000,
excellent module, I am about to receive the gateway. Now I have several RGB yelight bulbs and two Wi-Fi sockets.
I hope you add someday the management of sockets and yeelight.
At the moment I am managing it with scripts.

[shgmongohh]

@Albert2002
Hi,
I have some problems to get the token. See my errors here.

Can anybody help me with the token?

Sebastian

[shgmongohh]

I like to change the colour and the font size of the values in the css. But nothing change.

Can anybody please explain, how to change?

.xm-xiaomi .small {
  font-size: 24px;
}

.xm-xiaomi {
    position: relative;
}

.xm-disabled {
  color: black;
}

.xm-icon {
  padding-left: 8px;
}

.xm-room-item {
  font-size: 22px;
  margin-bottom: -15px;
  z-index: 5;
}

.xm-room-title {
  display: inline-block;
  width: 40%;
  z-index: 5;
}

.xm-room-bars {
  display: inline-block;
  width: 60%;
  z-index: 5;
}

.xm-legend-temp {
  position: absolute;
  height: 100%;
  width: 3px;
  background-color: #FF1493;
  left: 9%;
  z-index: 0;
}

.xm-legend-humid {
  position: absolute;
  height: 100%;
  width: 3px;
  background-color: blue;
  left: 42%;
  z-index: 0;
}


.xm-room-container
{
    height: 100%; 
    min-height: 100%;
    height: 200px;
}

.xm-room {
  
    width: 33.33%;
    height: 33.33%;
  background-color: #228B22;
}
.xm-room-header {
  border-bottom-style : solid;
  border-width: 1px;
 margin: 5px;
 //padding: 5px;
}
.xm-left {
  float: left;
}
.xm-right {
  float: right;
}
.xm-room-temp-humid {
   margin: 5px;
   
}
.xm-room-temp {
    float: left;
    width: 50%;
    padding-top:2px;
}
.xm-room-humid {
    float: right;
    width: 50%;
    text-align: right;
    padding-top:2px;
}
.xm-room-icons {
   margin: 5px;
   vertical-align: bottom;
  // height: 100%;
}
.xm-door-icon {
  float: left;
  width: 33%;
  padding-top:5px;
}
.xm-light-icon {
  float: left;
  width: 33%;
  text-align: center;
  padding-top:5px;
}
.xm-vent-icon {
  float: right;
  width: 33%;
  text-align: right;
  padding-top:5px;
}

[mirko3000]

Hi, sorry I did not reply to your last comment, did you solve the issues there?
About the CSS: basically you are at the right spot, adjusting these values (e.g. font-size) should change font size. What did you edit exactly? Did you try restarting MM after the changes?

[blinky1989dk]

This post is deleted!

[barnosch]

@blinky1989dk said in MMM-xiaomi - Temperature and Humidity from your smarthome:

to my config file. that’s fine, but it can not connect to the gateway. but as soon as I add more then it will be the case
so when i restart it does not start up :( what can i do? some have some bids

sorry i have no idea, what you try to say with that sentence.

[blinky1989dk]

@barnosch my config file works. but as soon as i add mmm.xiaomi to config. then my config file does not work anymore and my mirror does not start up

[yawns]

Your config looks a bit misconfigured. Please remove these lines.

	config: {
		// See 'Configuration options' for more information.
	}
	},

If this is still not working, then please paste your entire config.

[blinky1989dk]

@yawns is dot work. so i had try to send config fil to you on pb

[yawns]

/* Magic Mirror Config Sample

By Michael Teeuw http://michaelteeuw.nl
MIT Licensed.
*/
var config = {
zoom: 0.6,
port: 8080,
ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses.

language: "da",
timeFormat: 24,
units: "metric",

modules: [
	{
		module: "alert",
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: 'MMM-WunderGround',
		position: 'top_right',
		config: {
			apikey: 'xxxxxxxxxxxxxxxxxxxxxx', // private; don't share!
			pws: 'pws:IVEJLE2', //culemborg
			hourly: '1',
			fctext: '1',
			fcdaycount: "5",
			fcdaystart: "0",
			hourlyinterval: "3",
			hourlycount: "2",
			alerttime: 10000,
			alerttruncatestring: "english:",
			roundTmpDecs: 1,
			UseCardinals: 0,
			layout: "vertical",
			iconset: "novaco",
			sysstat: 0
		}
	},
	{
		module: "MMM-xiaomi",
		position: "bottom_left",
		header: "Temperature / Humidity", // This is optional
		config: {
			gatewayIP: "192.168.10.170",
			gatewayToken: "xxxxxxxxxxxxxxxxxxx",
			showwindow: true,
			showVentilation: false,
			minTemperature: true,
			maxHumidity: true,
			showlights: true,
			rooms: [
			{ name: "test", sortOrder: 30, devices: ["158d0001b911b9"] },
			],
		}
	},
	],
	};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

Please try again. I don’t know which text editor you used, but it is very important to only use these around strings:

• "
• ’

Do not use

• ‘
• “
• ”

[shgmongohh]

@mirko3000
Yes, i solved the problem with the token.

to my css:
I add

.xm-xiaomi .small {
  font-size: 24px;
}

to get a bigger fonts.

I try to change the default colours e.g.

.xm-legend-temp {
  position: absolute;
  height: 100%;
  width: 3px;
  background-color: #FF1493;
  left: 9%;
  z-index: 0;

And I want to have bigger figueres for temperature and humidity

.xm-room-temp-humid {
   margin: 10px;
   
}