Cannot access to MagicMirror despite IpWhiteList

MrNonoss

Thank you for your tip @Mykle1, but unfortunately, it changed nothing.

But looking at my CLI after launching MM, the end seems strange.
Is it normal to stop like this?

GET_WUNDERGROUND

Mykle1

@MrNonoss said in Cannot access to MagicMirror despite IpWhiteList:

Thank you for your tip @Mykle1, but unfortunately, it changed nothing.

Ah, hmm. Are Home Assistant and MM accessing the same port?

But looking at my CLI after launching MM, the end seems strange.
Is it normal to stop like this?
GET_WUNDERGROUND

Yes, completely normal

MrNonoss

Thank you for your quick reply.

Nope, Home Assistant is using port 80

MrNonoss

Hi all,

I come back with a hint…
There are two web server on my computer, but I didn’t installed any “Apache” or so, so I didn’t configured anything
One is with Home Assistant (coded in Python) and the other one is the MagicMiror.

Could it be a sort of conflict between these two?

Mykle1

@MrNonoss

If you remove or disable Home Assistant can you then connect to MagicMirror?

MrNonoss

There’s no other option than deleting the installation folder.
I tried, but, with no succes.

I’m bored. Il will try to reinstall the whole things, starting by MM, testing --> If Ok --> Then Install Home Assistant and test again, it will give tips (I hope)

Thank you again Mykle

Mykle1

@MrNonoss

You’re welcome, mate.

I agree. Install MM first and get your connection established. Let me know how you make out.

MrNonoss

Hi everyone,

Problem solved with a new fresh install. Unfortunately, the issue came from me.
From my config.js to be more accurate.

My exact config.js was:

var config = {
	port: 8080,
	adress: "0.0.0.0",
	ipWhitelist: ["127.0.0.1", "192.168.1.1/24", "192.168.2.1/24", "192.168.2.100"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

My new and working one is the one Mykle1 gave me:

var config = {
        port: 8080,
        address: "0.0.0.0",
        ipWhitelist: [],

I assume it’s a coma mistake.
Nothing to do with multi web server.

Thank you again for your help.
Best regards