My First Mirror... until now ^^

metalldetector

@c:face_with_steam_from_nose: ruunnerr ok that works…
-What ist the Funktion of LED_PIN = 16 .
Only one pin …
Do I need RGB pins in the script?

-And then the led stripe start it’s flickering…
Thx4yourhelp

cruunnerr

LED-Pin just shows, if the PIR detects motion. You don’t need to use it.

The pir.py script starts the other shell scripts when motion is detected.

So all commands for the RGB-Stripe are within the shell scripts (monitor_on / off.sh).
And as u can see, i used GPIO 17,22 and 24.
17 = red
22 = green
24 = blue

To control the LEDs i used PIGPIOD and it’s commands, as i wrote.

So after installing PIGIOD u can start it with:
sudo pigpiod

Commands like pigs p 22 128 will set green to 50%.
pigs p 24 255 will set blue to 100%

in the shell script i fade all colors from 1 to 12% with sleeps.

Edit:

As i wrote before u need to Autostart pigpiod via rc.local.

sudo nano /etc/rc.local

Mine looks like this:

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

# Print the IP address
_IP=$(hostname -I) || true
if [ "$_IP" ]; then
  printf "My IP address is %s\n" "$_IP"
fi

iwconfig wlan0 power off &

sleep 5 &

/usr/local/bin/pigpiod

sleep 10 &

/usr/bin/python /home/pi/pir.py &

exit 0

metalldetector

@cruunnerr ok I think this is the right way and I understand it with the led pin on Pin16
… Just the flickering looks not good… I try a other power consumption…

…can I only fade the LEDs or can I make a light like a animation around my mirror?

Thanks for your help … And so fast.

This is a good forum for me…

Thx to all guys

cruunnerr

Well, if i had to do that project gain, i would not choose the RGB-5050 stripes again…

I would directly get WS2812, because u just need one PWM Pin and with that you were able to do things like animations…

In another project (infinity table) i choosed this one and was pretty amused :)

https://youtu.be/IcDjzh03W-4

metalldetector

Yes. But what is the difference between WS2812, WS2812, neopixel…
What is the best stripe with a good price…
I think a meter for 60 euro is to much…

Greetings from Saxony, Germany

cruunnerr

https://de.aliexpress.com/item/1m-2m-3m-4m-5m-ws2812b-ws2812-led-strip-individually-addressable-smart-led-strip-black-white/32682015405.html?spm=a2g0x.search0104.3.9.4eef3dc9EKAZdz&ws_ab_test=searchweb0_0,searchweb201602_3_10065_10068_10547_319_317_10548_10696_10084_453_10083_454_10618_10304_10307_10820_10821_537_10302_536_10843_10059_10884_10887_321_322_10103,searchweb201603_6,ppcSwitch_0&algo_expid=b24b32fc-d347-41f0-b20b-702e47e2d79c-1&algo_pvid=b24b32fc-d347-41f0-b20b-702e47e2d79c&transAbTest=ae803_3

I have got this one. 5m with 60 LEDs per meter for about 17€

metalldetector

@cruunnerr very good deal.
But what is the difference in the product options… blue or black pcm …

metalldetector

Mensch… du sprichst bestimmt deutsch…
Wie hast du die Temperatur Module angebunden?

Etwa mit wlan esp’s ?

cruunnerr

Blau und schwarz beschreibt nur die Farbe des Streifens selber (nicht der LED). Also für die Funktion egal.

Naja, also die Temperaturen kommen von meinem IoBroker Server. Um ehrlich zu sein habe ich schon länger nicht mehr an meinem Spiegel gearbeitet, sondern andere Projekte gestartet und vollendet.
Mein ganzes Haus ist mittlerweile steuerbar (Licht, Thermostate, Lautsprecher etc…). Unter anderem habe ich eben auch Temperatursensoren von Xiaomi im Einsatz, die ihre Werte an meinen Server schicken.
Auf dem Spiegel zeige ich die Werte dann mit dem MMM-iobroker Modul an.

Aber ich habe auch viel mit ESP’s gemacht. Habe derzeit ca. 8 Stück im Einsatz. Einer steuert meine komplette Heizung. Einer steuert meine Klingel. Einer wertet meine Alarmanlage aus. Zwei sind für meinen Infinity Tisch… etc. pp… ^^
Macht ziemlich viel Spaß

Blue and black only describes the color of the strip itself (not the LED). So no matter for the function.

Well, so the temperatures come from my IoBroker server. To be honest, I have not worked on my mirror for some time, but started and completed other projects.
My whole house is now controllable (lights, thermostats, speakers etc …). Among other things, I have also used temperature sensors from Xiaomi, which send their values to my server.
On the mirror I then display the values with the [MMM-iobroker] (https://github.com/ioBroker/MMM-ioBroker) module.

But I also did a lot of ESP’s. Currently have about 8 pieces in use. One controls my entire heater. One controls my bell. One evaluates my alarm system. Two are for my infinity table … etc. pp … ^^
It’s a lot of fun

metalldetector

Ja mach schon Spass…
Wollte auch einen openhub installieren … auf einem raspi Zero… Mal schauen ob das was wird… Meine ESP usb serial programmer hardware kommt erst noch.
Wollte die Temperaturwerte mit mmm-rest auslesen… Mal schauen… Ich danke dir jedenfalls für die tips