Read the statement by Michael Teeuw here.
MMM-ping
-
To sum up the list here is also an unpublished module I did a while ago
https://github.com/fewieden/MMM-ping
[card:fewieden/MMM-ping]
Requested from @amanzimdwini @Phate
-
@strawberry-3.141 I got this module installed working fine, I have a request here, I have many devices connected with DHCP in my local network at home, is it possible to get the IP using MAC address of the device. only IP with friendly name has to be displayed on the Mirror. At present i have 5 Rasp pi connected each in a room using as a MultiRoom audio system.
-
@strawberry-3.141 I got this module installed working fine, I have a request here, I have many devices connected with DHCP in my local network at home, is it possible to get the IP using MAC address of the device. only IP with friendly name has to be displayed on the Mirror. At present i have 5 Rasp pi connected each in a room using as a MultiRoom audio system.
@shashank I had a similar requirement so I temporarily created another module which scans the network for devices based on their mac address, and then displays their status. I use it to display an indicator of who is home based on the visibility of their smart phone devices…
I was planned to see if I could merge this into MMM-Ping and create a pull request. Sadly this is bottom of the pile right now. I could publish it as a separate repository if that helps
-
@ianperrin Thanks for the update,eager to see the module.
-
-
[2.0.1]
Added
- Config option
transitionTimehttps://github.com/fewieden/MMM-ping/issues/4
https://github.com/fewieden/MMM-ping
[card:fewieden/MMM-ping]
- Config option
-
Could someone give an example how to activate / deactivate the monitor (hdmi) with dependency to the ping order?
Like: if pinged device = onlinte then set hdmi := online if not hdmi := offline
Thanks a lot
