Read the statement by Michael Teeuw here.
Hello-Lucy
-
@Mykle1 said in Hello-Lucy:
Hello Lucy!
That poor kid having to be related to you LOL I hope she doesn’t need therapy later in life
-
Haha!
-
Hey @Mykle1 first off great module, but I’m having a little difficulty, A ) I have no video at all now, B ) the mic works but constantly shows error, and C ) so far MMM-BMW-CC hides and shows but stays a loading climacell data. Any advice/pointers??
-
I’m confused a bit
-
You have no video at all? I’m not sure what that means.
-
I’ve never seen Lucy work when the microphone reports ‘error’.
-
BMW-CC sounds like a different issue.
Start MM using
npm start devand report any errors in red after choosing the ‘Console’ tab in the window that opens.Also, paste your config entry for BMW-CC (in a code block) here so I can look at it.
-
-
@Mykle1
1 there is no HDMI output of anything not raspbian, not the magic mirror, nothing, it used to default to the magic mirror dashboard monitor receives signal but is black- Now even though I’ve changed nothing, my magic mirror wont show any modules just loads a black page
3.```
{ disabled: false, module: "MMM-BMW-CC", position: "bottom_bar", // designed for bottom_bar(best) thirds should be good too config: { apiKey: "XXX_Santized_XXX", // Get at https://www.climacell.co/weather-api/pricing/ ownTitle: "Current Conditions", tempUnits: "us", // us = F or si = C lat: '39.321940', // Your latitude lon: '-74.604440', // Your longitude css: "1", // 1-6 playSounds: "no", useHeader: false, // true if you want a header header: "Your header", maxWidth: "100%", updateInterval: 5 * 60 * 1000, }},
no errors with npm start dev at all > magicmirror@2.11.0 start /home/pi/MagicMirror > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js "dev" [2020-05-27 20:27:05.311] [LOG] Starting MagicMirror: v2.11.0 [2020-05-27 20:27:05.325] [LOG] Loading config ... [2020-05-27 20:27:05.336] [LOG] Loading module helpers ... [2020-05-27 20:27:08.368] [LOG] Initializing new module helper ... [2020-05-27 20:27:08.369] [LOG] Module helper loaded: Hello-Lucy [2020-05-27 20:27:08.430] [LOG] Initializing new module helper ... [2020-05-27 20:27:08.431] [LOG] Module helper loaded: updatenotification [2020-05-27 20:27:08.433] [LOG] No helper found for module: clock. [2020-05-27 20:27:08.976] [LOG] Initializing new module helper ... [2020-05-27 20:27:08.977] [LOG] Module helper loaded: MMM-AfterShip [2020-05-27 20:27:09.095] [LOG] Initializing new module helper ... [2020-05-27 20:27:09.096] [LOG] Module helper loaded: calendar [2020-05-27 20:27:09.118] [LOG] Initializing new module helper ... [2020-05-27 20:27:09.119] [LOG] Module helper loaded: MMM-SystemStats [2020-05-27 20:27:09.121] [LOG] No helper found for module: currentweather. [2020-05-27 20:27:09.124] [LOG] Initializing new module helper ... [2020-05-27 20:27:09.125] [LOG] Module helper loaded: MMM-BMW-CC [2020-05-27 20:27:09.127] [LOG] No helper found for module: MMM-Modulebar. [2020-05-27 20:27:09.127] [LOG] All module helpers loaded. [2020-05-27 20:27:09.317] [LOG] Starting server on port 8080 ... [2020-05-27 20:27:09.327] [INFO] You're using a full whitelist configuration to allow for all IPs [2020-05-27 20:27:09.337] [LOG] Server started ... [2020-05-27 20:27:09.339] [LOG] Connecting socket for: Hello-Lucy [2020-05-27 20:27:09.340] [LOG] Starting module helper: Hello-Lucy [2020-05-27 20:27:09.342] [LOG] Connecting socket for: updatenotification [2020-05-27 20:27:09.343] [LOG] Connecting socket for: MMM-AfterShip [2020-05-27 20:27:09.344] [LOG] Starting node_helper for: MMM-AfterShip [2020-05-27 20:27:09.346] [LOG] Connecting socket for: calendar [2020-05-27 20:27:09.347] [LOG] Starting node helper for: calendar [2020-05-27 20:27:09.348] [LOG] Connecting socket for: MMM-SystemStats [2020-05-27 20:27:09.349] [LOG] Connecting socket for: MMM-BMW-CC [2020-05-27 20:27:09.351] [LOG] Starting node_helper for: MMM-BMW-CC [2020-05-27 20:27:09.351] [LOG] Sockets connected & modules started ... [2020-05-27 20:27:09.501] [LOG] Launching application. [2020-05-27 20:27:14.160] [LOG] Create new calendar fetcher for url: -
@Mykle1 Maybe I fried my 3b+ when I also added this RPI HiFi AMP HAT TAS5713 Amplifier Audio Module 25W Class-D?
-
@Mykle1 Yup sorry to bother you, but I defintely fried it, i put the sd card in my pi4b and got video, my other problems must be from that
-
So everything is ok now?
-
@Mykle1 gonna do a fresh install and copy my config onto the 4b because something messed up happened to all that hardware
It booted but right to a completely blank black dashboard
-
ok, good luck
-
@Mykle1 turns out I just messed up the screen location like an idiot which fixed the blank dashboard and the mic error went away as well as the BMW_CC not loading. but I still get no hdmi output on this 3b+ I wonder what the heck that could be could I have burned that out if everything else on the pi is running fine?
-
@Mykle1 I FIXED IT!!! Sorry lol But it goes to 720x480
if i change it to 1920x1080 like i had it no video output on the hdmi any more -
@Mykle1 got 1080P back by setting
hdmi_group=1
hdmi_mode=16
hdmi_boost > 6
hdmi_ignore_edid = 0xa5000080
hdmi_edid_file = 1in /boot/config.txt
but now i get green flecks everywhere
-
Stop breaking shit. :-)
-
:face_with_tears_of_joy: but thats what i do for a living, I build it or someone else does, then i break it and i fix it, lol
on another note, i guess i said too many unkown commands or somethings and a list of all the commands possible popped up and wont go away, any thoughts other than rebooting :grinning_face_with_smiling_eyes:
-
-
@Mykle1 Sorry to be bothering you again, decided to switch to my pi4b to see how it performs, and now the usb camera I had working on the pi3b+ will not work now, arecord -l lists it as card 2 device 0 and it still says error. Im at a lost npm start dev shows no errors and if I take the same config over to the 3b+ with the proper mapping it works fine
pi@MagicMirror:~ $ arecord test.wav ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM input arecord: main:828: audio open error: No such file or directory -
@snikolaidis on you pi3 you have a file ~/.asoundrc
did u build one on pi4 ? with the right info? -
@sdetweil said in Hello-Lucy:
~/.asoundrc
Pi3 file doesnt exist - mic shows error but works
pi4 file exists - mic shows error still doesn’t work -
@sdetweil also weirdly enough
pi@MagicMirror:~ $ arecord -D hw:2,0 test.wav Recording WAVE 'test.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono arecord: set_params:1339: Sample format non available Available formats: - S16_LEbut
pi@MagicMirror:~ $ arecord test.wav arecord: main:828: audio open error: No such file or directory pi@MagicMirror:~ $
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login