Problem server client configuration

Akkor

This post is deleted!

Akkor

@idoodler
This is the answer

pi@raspberrypi:~ $ pm2 log mm
[TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option)
/home/pi/.pm2/logs/mm-error.log last 15 lines:
0|mm       | (electron:2017): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2027): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2037): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2047): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2057): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2067): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2077): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2093): Gtk-WARNING **: cannot open display:

Akkor

Pls help I cannot find any solution

sdetweil

if you are trying to start over an ssh session, you need to add this before the node clientonly

if [ -z “$DISPLAY” ]; then #If not set DISPLAY is SSH remote or tty
export DISPLAY=:0 # Set by default display
fi

bhepler

@akkor - Ugh. Why would you want to use Electron if you didn’t have to? There’s already a web browser on your Pi. Just point it at the MM server and be done with it.

I’ve learned that you can get Chromium to start in kiosk mode at a particular URL with about an hour of research and testing. Minimal swearing was involved.

idoodler

@bhepler Electron is already a premade solution that works great. However using Chromium in Kiosk mode is also a nice and easy solution. And it may solve the issue here.

@Akkor How to open Chromium in kioksmode on startup: https://raspberrypi.stackexchange.com/questions/40631/setting-up-a-kiosk-with-chromium

Akkor

@idoodler @bhepler
I Have setup chromium to autostart and it’s ok
But I would like use Electron to use the voice command on client like this one https://github.com/mykle1/Hello-Lucy or https://github.com/joanaz/MMM-MirrorMirrorOnTheWall but I don’t know if it’s doable in server/client mode

idoodler

@akkor I don’t think you can use Hello-Lucy in client mode.
But I bet the developer @Mykle1 knows it.

Akkor

ok so wait for @Mykle1

macnice

This post is deleted!