Posts made by evroom

evroom

Did you setup auto start according to this procedure?

https://github.com/MichMich/MagicMirror/wiki/Auto-Starting-MagicMirror

Perhaps it worked for me because the omx_stream was already known by pm2 in my case.
Perhaps it needs to run once for pm2 to be useful.
No idea.

pm2 list

Only shows mm, or MagicMirror?

evroom

A few hours ago I was busy with this module too, as it stopped to work after I loaded the latest changes.
I deleted and re-installed the module again; am on the origin/master branch.
For me, the stream only started after this command:

pm2 start omx_stream1

Perhaps worth a try.

With

pm2 list

you can see if omx_stream1 is online.

Then I saved the pm2 config to make it boot resistant

pm2 update
pm2 save

Btw, I do not see the

Starting stream stream1 with args

in the pm2 logs anymore.

evroom

@mwoodage
Do you have the parameter “omxRestart” in your MMM-RTSPStream config ?
I assume you are using this module.
If yes, I would try to comment out (//) this parameter.
Or set it to 0 (omxRestart: 0,).

evroom

@AxLed
I have opened 4 feature requests on GitHub.

To be honest, my MM is hanging a meter or so away from the TV, so I most probably will not make use of the module.
Navigating through the services list and starting & stopping a stream is not that comfortable
Although it might be practical to see on my MM what is currently playing and I might use it solely as a program guide.

Will be available though for some testing.

evroom

Okay, rebooted in order to start fresh.

Now 1 stream.
Looks like one actual omxplayer active:

pi@MagicPi:~/MagicMirror/modules $ ps -eaf | grep omxplayer | grep -v grep
pi       29320 29185  0 18:39 ?        00:00:00 /bin/sh -c omxplayer  --win 0,0,480,320  -o both http://192.168.178.28:8001/1:0:16:177A:C82:3:EB0000:0:0:0:
pi       29321 29320  0 18:39 ?        00:00:00 /bin/bash /usr/bin/omxplayer --win 0,0,480,320 -o both http://192.168.178.28:8001/1:0:16:177A:C82:3:EB0000:0:0:0:
pi       29344 29321 10 18:39 ?        00:00:01 /usr/bin/omxplayer.bin --win 0,0,480,320 -o both http://192.168.178.28:8001/1:0:16:177A:C82:3:EB0000:0:0:0:

InfoBarTunerState also states there is one stream.

The will do for today.
Will do some more testing tomorrow.

Thanks a lot AxLed for the support so far !!

evroom

Btw, is there a possibility to have the start, next, prev and stop URL’s configured in MMM-Remote-Control ?

evroom

Okay, I have MMM-Remote-Control running and I can open the menu.
Now using:

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-PLAY

I get this:

{"status":"success"}

Now I see a stream on my monitor !!

With DB-SERVICE-NEXT and DB-SERVICE-PREV I can scroll through the services list
Also gives

{"status":"success"}

But I cannot switch to another service with DB-PLAY.

And I have a side effect that it takes 3 or 4 services on my Dreambox.
I have the plugin InfoBarTunerState installed and I see that MM is trying to stream multiple services.

At this moment I see one stream on my MM monitor, but my Dreambox tells me there are 2 MM streams present (on 2 different services).

Here the OMXPlayer processes at this moment:

pi@MagicPi:~/MagicMirror/modules $ ps -eaf | grep omxplayer | grep -v grep
pi       28431 28259  0 18:06 ?        00:00:00 /bin/sh -c omxplayer  --win 320,180,1600,900  -o both http://192.168.178.28:8001/1:0:16:177A:C82:3:EB0000:0:0:0:
pi       28432 28431  0 18:06 ?        00:00:00 /bin/bash /usr/bin/omxplayer --win 320,180,1600,900 -o both http://192.168.178.28:8001/1:0:16:177A:C82:3:EB0000:0:0:0:
pi       28455 28432 10 18:06 ?        00:02:50 /usr/bin/omxplayer.bin --win 320,180,1600,900 -o both http://192.168.178.28:8001/1:0:16:177A:C82:3:EB0000:0:0:0:
pi       28522 28259  0 18:15 ?        00:00:00 /bin/sh -c omxplayer  --win 320,180,1600,900  -o both http://192.168.178.28:8001/1:0:16:36F8:C8C:3:EB0000:0:0:0:
pi       28523 28522  0 18:15 ?        00:00:00 /bin/bash /usr/bin/omxplayer --win 320,180,1600,900 -o both http://192.168.178.28:8001/1:0:16:36F8:C8C:3:EB0000:0:0:0:
pi       28546 28523  3 18:15 ?        00:00:31 /usr/bin/omxplayer.bin --win 320,180,1600,900 -o both http://192.168.178.28:8001/1:0:16:36F8:C8C:3:EB0000:0:0:0:

evroom

@axled
I was about to ask about this.
Suppose it works, how will I use it in practise?

I have a Pi with a monitor connected hanging in the kitchen.
No fancy mirror like many, with speech and buttons and PIRs.

So, basically no interaction.

I plan on getting speech running, but I have other projects running at this moment (for instance Homematic IP and ioBroker).

I will try to install MMM-Remote-Control and see if that will work.

evroom

All actions:

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-SERVICE-NEXT

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-SERVICE-PREV

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-PLAY

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-STOP

Result in:

Cannot GET /remote

evroom

@AxLed
The services list now is present.
Next step is to stream one.