[MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer

AxLed

@Cr4z33
I dont know if it makes sense, to use a favorite list of services/stations/channels that wont fit on the screen of MM, as the list is to long.

Start streaming can be done by selecting one service/station/channel (by using yourmmip:8080/remote?action=NOTIFICATION&notification=DB-SERVICE-NEXT for example) and than start streaming by (yourmmip:8080/remote?action=NOTIFICATION&notification=DB-PLAY).

Do you have MMM-Remote-Control installed?
Se my previous answer to evroom.

AxLED

Cr4z33

@axled oh now I understand.
Thanks for the information.

However I don’t have MMM-Remote-Control and I rather prefer to control everything by voice commands (MMM-AssistantMk2).
Sorry, but then this module doesn’t suit my needs. :winking_face:

AxLed

@Cr4z33
You should be able to send notifications by voice commands also.
AxLED

AxLed

@evroom
Here is a screenshot of my Mirror

I have a PIR-Sensor (for turning screen on/off) and a rotary encoder connected (to the GPIO PINs of the Pi).

In the bottom right corner you see my “first” module MMM-Navigate which interacts with the rotary encoder.

So depending on the navigation menu i am able to:

swipe pages (i have four)
show Details to newsfeeds (opens website to the newsfeed)
adjust brightness
select dreambox channels
start/stop streaming dreambox channels
control the mirror (restart mm, shutdown, reboot)
and for the future: everything which can handle the MM notification system

AxLED

evroom

Okay, I have MMM-Remote-Control running and I can open the menu.
Now using:

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-PLAY

I get this:

{"status":"success"}

Now I see a stream on my monitor !!

With DB-SERVICE-NEXT and DB-SERVICE-PREV I can scroll through the services list
Also gives

{"status":"success"}

But I cannot switch to another service with DB-PLAY.

And I have a side effect that it takes 3 or 4 services on my Dreambox.
I have the plugin InfoBarTunerState installed and I see that MM is trying to stream multiple services.

At this moment I see one stream on my MM monitor, but my Dreambox tells me there are 2 MM streams present (on 2 different services).

Here the OMXPlayer processes at this moment:

pi@MagicPi:~/MagicMirror/modules $ ps -eaf | grep omxplayer | grep -v grep
pi       28431 28259  0 18:06 ?        00:00:00 /bin/sh -c omxplayer  --win 320,180,1600,900  -o both http://192.168.178.28:8001/1:0:16:177A:C82:3:EB0000:0:0:0:
pi       28432 28431  0 18:06 ?        00:00:00 /bin/bash /usr/bin/omxplayer --win 320,180,1600,900 -o both http://192.168.178.28:8001/1:0:16:177A:C82:3:EB0000:0:0:0:
pi       28455 28432 10 18:06 ?        00:02:50 /usr/bin/omxplayer.bin --win 320,180,1600,900 -o both http://192.168.178.28:8001/1:0:16:177A:C82:3:EB0000:0:0:0:
pi       28522 28259  0 18:15 ?        00:00:00 /bin/sh -c omxplayer  --win 320,180,1600,900  -o both http://192.168.178.28:8001/1:0:16:36F8:C8C:3:EB0000:0:0:0:
pi       28523 28522  0 18:15 ?        00:00:00 /bin/bash /usr/bin/omxplayer --win 320,180,1600,900 -o both http://192.168.178.28:8001/1:0:16:36F8:C8C:3:EB0000:0:0:0:
pi       28546 28523  3 18:15 ?        00:00:31 /usr/bin/omxplayer.bin --win 320,180,1600,900 -o both http://192.168.178.28:8001/1:0:16:36F8:C8C:3:EB0000:0:0:0:

evroom

Btw, is there a possibility to have the start, next, prev and stop URL’s configured in MMM-Remote-Control ?

evroom

Okay, rebooted in order to start fresh.

Now 1 stream.
Looks like one actual omxplayer active:

pi@MagicPi:~/MagicMirror/modules $ ps -eaf | grep omxplayer | grep -v grep
pi       29320 29185  0 18:39 ?        00:00:00 /bin/sh -c omxplayer  --win 0,0,480,320  -o both http://192.168.178.28:8001/1:0:16:177A:C82:3:EB0000:0:0:0:
pi       29321 29320  0 18:39 ?        00:00:00 /bin/bash /usr/bin/omxplayer --win 0,0,480,320 -o both http://192.168.178.28:8001/1:0:16:177A:C82:3:EB0000:0:0:0:
pi       29344 29321 10 18:39 ?        00:00:01 /usr/bin/omxplayer.bin --win 0,0,480,320 -o both http://192.168.178.28:8001/1:0:16:177A:C82:3:EB0000:0:0:0:

InfoBarTunerState also states there is one stream.

The will do for today.
Will do some more testing tomorrow.

Thanks a lot AxLed for the support so far !!

AxLed

@evroom
Good to hear you had success and thanks for your challenge with more than one bouquet 😂, helped debugging the module.

AxLED

evroom

@AxLed
I have opened 4 feature requests on GitHub.

To be honest, my MM is hanging a meter or so away from the TV, so I most probably will not make use of the module.
Navigating through the services list and starting & stopping a stream is not that comfortable
Although it might be practical to see on my MM what is currently playing and I might use it solely as a program guide.

Will be available though for some testing.

AxLed

Hi, if the to monitors are close together you can still view 2 different shows :-) .
I checked your 4 feature requests and added 2 of them in the module.
For the other two i can not promise, if they will be implemented.

AxLED