[MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer

evroom

“You talking to me ?” (Robert de Niro - Taxi Driver).
I sent the files, just in case.

AxLed

@evroom said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

I sent the files

@evroom
Thanks for the files, i checked them and found an Error in MMM-Dreambox.js

My “getallservices” xml only has one “bouquet”, so i checked only for one.
As your “getallservices” xml has three “bouquets” i changed the code.

If you do a git pull (master repository) it should work.

So far i decided only to show the services/stations/channels of the first bouquet only, (userbouquet.favourites.tv) in your case.

AxLED

AxLed

@cr4z33 said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

@axled OK gimme a minute and I send them.

@Cr4z33
Thanks for your files, one a fast view you also have more than one bouquet in “getallservices”, so my last fix should work for you also.

Try agit pull (master repository).

AxLED

evroom

@AxLed
The services list now is present.
Next step is to stream one.

Cr4z33

@axled the situation now is like in the below screenshot and I still don’t know how I am supposed to stream a channel (if I don’t have to specify its url). :smiling_face_with_open_mouth_cold_sweat:

evroom

All actions:

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-SERVICE-NEXT

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-SERVICE-PREV

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-PLAY

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-STOP

Result in:

Cannot GET /remote

AxLed

@evroom
How do you plan to interact with your MM?
I have a rotary encoder. Buttons or touch is also fine.
For the beginning you can use MMM-Remote-Control to send notifications.
I have to complete my Readme, that the sample links only work with MMM-Remote-Control

So install MMM-Remote-Control, open an browser, modify the links matching to your environment and you should be able to select channels and stream them.

Important: Try with SD Channels first, as for HD channels the mpg2 codec is needed.

AxLED

evroom

@axled
I was about to ask about this.
Suppose it works, how will I use it in practise?

I have a Pi with a monitor connected hanging in the kitchen.
No fancy mirror like many, with speech and buttons and PIRs.

So, basically no interaction.

I plan on getting speech running, but I have other projects running at this moment (for instance Homematic IP and ioBroker).

I will try to install MMM-Remote-Control and see if that will work.

AxLed

@Cr4z33
I dont know if it makes sense, to use a favorite list of services/stations/channels that wont fit on the screen of MM, as the list is to long.

Start streaming can be done by selecting one service/station/channel (by using yourmmip:8080/remote?action=NOTIFICATION&notification=DB-SERVICE-NEXT for example) and than start streaming by (yourmmip:8080/remote?action=NOTIFICATION&notification=DB-PLAY).

Do you have MMM-Remote-Control installed?
Se my previous answer to evroom.

AxLED

Cr4z33

@axled oh now I understand.
Thanks for the information.

However I don’t have MMM-Remote-Control and I rather prefer to control everything by voice commands (MMM-AssistantMk2).
Sorry, but then this module doesn’t suit my needs. :winking_face: