@sdetweil said in Which microphone do you use?:

@jste84 i use a logitech c270 webcam for its mic, and a playstation eye, and a no-name webcam.

Thanks for this I bought a playstation eye but I’m still getting the same error… Not really sure how I fix this

I’m working on a similar idea to yours s i’ll chuck in my two cents on this… I’ve bought acrylic and read others say i should have went with glass… I absolutely wish i had.

Your glass in front of it might protect it, I read larger pieces of acrylic can warp… Mine has a bit, its ok if you are sitting in front of it, but if you look from a distance its not great.

I love my mirror and frame ( used some wood and stained it ) but my biggest regret is not going for glass. I’m trying to get the PIR sensor to work properly - I’m not there yet, it seems to be very sensitive and wakes up a lot… but that’s probably because i’ve not got it set up quite right…

@jste84 anyone able to help with this

If you use a mic in your set up? Which do you use?

I’m using a cheap usb mic, which was working but at standard quality seems to pickup interference and not work properly.

I’ve managed to test at a higher quality and it works, but I can’t seem to find how to change this so it works in modules…

Can anyone recommend a mic they use?

@sdetweil is it this line

sudo chmod u+s /opt/VC/bin/tvservice && sudo chmod u+s bin/chvt

That I need to change? Would I just change TV service to vcgencmd

Having tested the commands it looks like
sudo tvservice -p doesn’t work with my monitor. (-o works though which is strange?)

Vcgencmd works perfectly though…

Could this be a reason why it’s not working?

I’m having a similar issue using Mmm-PIR-Sensor

Using a pi 3b+ and it turns the screen off but not back on again…

Hi, I’m having issues where my mirror has been sluggish over the last few days?

Going to black screen, taking ages to start on reboot…

Has anyone else encountered this? Using a pi 3b+

Just wondering if there’s something I can do to improve this as it wasn’t happening before

Re: MMM-UKLiveBusStopInfo - Arrivals & Departures from a UK Bus Stop

Sorry for bumping up.this thread

I’m keen on this module for my mirror.

I’ve found what I believe to be my atcocode but I get a ‘loading bus info’ when I use this.

I believe the correct Atco is 73723972…

I’ve tried the other Atco in this thread and this works perfectly… Can anyone help me check if I’ve got the right Atco?

@Egnos edit: removed the module and reinstalled and it’s working 👌

Wondering if anyone else has had this issue or is able to help

Is anyone able to help with this

@shagtimetim you got this module working?

@sdetweil said in Usb microphone:

@jste84 lsusb
and arecord -l (L as in list)

So caught up In the other issue I forgot to reply about this. It’s card 2, device 0

Just tried a brand new magic mirror install, same message.

Looks like this is now broken. Unless anyone has a solution for the recipe error?

I know the module maker is no longer on here so I’m guessing the chances of this being fixed are slim?

I just posted about issues I’m having with this module after update

I tried a fresh install but sadly I’m not having any luck with it

Wish I hadn’t updated :(

Hi,

I tried to update this module and am getting an error on the mirror after this has completed.

[ASSISTANT] RECIPE_ERROR (with-BackgroundStatus.js)

Can anyone help? I’ve tried removing the module and doing a fresh install and I’m getting the same message…

@sdetweil I now can’t use the mirror. I get the error even if I disable the module in config.js

I’ve tried deleting and doing a fresh install… Getting the same error

I’ve now got another problem just tried to update the module (I had notifications telling me there were updates) and I’m getting an error 🥺

Assistant Recipe_error (with-backgroundstatus.js)

@sdetweil pretty sure it’s the same port. I guess it’s possible I’ve changed it… But it was still plugged into the pi…