@OliWer, yes MagicMirror is complex (like your real live !)

@sakliadem see my PythonPrint module which takles outut fron a python script and displays it… you can copy and use this however you want https://github.com/sdetweil/MMM-PythonPrint

@spitzlbergerj the errors should only be when we fetch the ics file, once every 10 or 15 minutes (for each such entry to process)

@sdetweil More by luck than skill, but thank you for your help and patience with this.

@BrotherDan yep, 1 little letter… glad u found it

@drippyer got it…

@DarrenHill git is the thing gitHUB is just server for holding code, and accepting changes (pull requests) from others

@sdetweil said in After MM upgrade wont start: npm install electron@17.2.0 Yes that worked thankyou

Thanks for your help =) I was not able to get MMM-PIR-Sensor running, even with your steps listed above. As it is deprecated I did what @karsten13 suggested and used another PIR (MMM-PIR). It had the same issue first, but using magicmirror-rebuild from https://forum.magicmirror.builders/topic/16074/electron-rebuild-and-magicmirror-v2-18-and-more?page=1 I was able to got the PIR working again. So again: Thanks for trying to help and your suggestions!

see https://forum.magicmirror.builders/topic/15778/fix-for-black-screen-in-2-16-and-later

@sdetweil as works, thank you!

@sdetweil yes, i did the npm install after git clone. I tried both versions: npm install --only=prod --omit=dev //as seen in the tutorial npm install // as seen in the forum damnit… i just did npm install again, and now it works. Thanks! The iPad is an Gen. 8 with the latest iOS. it works just fine!

@sakliadem stop from auto starting? pm2 stop xx pm2 save reboot see pm2 – help for all the things it can do

@requiemmg Can you mark this as solved?

@Cyric - You’re welcome. I did the same update myself this morning, so know what needed to be changed… Don’t forget to mark the issue as solved.

@tanvir586 said in NODE.JS problem after 2.19: MagicMirror-rebuild author said because this module is archived, he won’t fix his rebuild tool for it anymore

@sdetweil well I don’t know what I did wrong the 1st time, but I duplicated what was there and just change the names and now it’s working. I don’t know what I did wrong but it’s working thank you for your help. Your awesome as always

@mumblebaj i edited off the latest post number, as u need post 1

@Nneuland magicmirror is just an application. other things might be consuming CPU too. ssh in and run the top command. it will bring up a green of running processes sorted u CPU usage, high to low and it refreshes every few seconds. particularly when the system appears slowed down

I usually don’t do this and dig to the bottom of the problem, but this time I gave up and reverted back to Raspbian Buster and all my issues were solved. It seems that there are still some issues with RPi3b+ and Bullseye.