MM startup problem after update

[manu85340]

Hello, I updated the new MM with the script from @sdetweil (as I usually do) everything went well but after the sudo reboot the screen remains stuck on the operating system page raspberry but the MM does not start, I tried to do

pm2 stop al

l and then

pm2 start all

but still nothing happens on the pi screen! thank you in advance for your help, the script is as follows, I passed it after doing a pm2 stop all

bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)" apply

[BKeyport]

@manu85340 did you get a all black screen? There’s some background stuff that needs node/npm upgraded. If you updated before around 6 hours prior to your post, run the command again.

[manu85340]

@BKeyport No I didn’t have a black screen, I ran the script I didn’t get an error message I updated about 2 hours ago, I updated again the update an hour ago but MM still does not want to start I don’t understand why thank you for your help

[sdetweil]

@manu85340 logs

pm2 stop all
cd ~/MagicMirror
npm start

pm2 logs --lines=50
also might tell us

I’ve seen some troubles w pm2 lately not on pi os, but maybe here too now

[sdetweil]

@manu85340 also try this

sudo npm install -g pm2@latest
pm2 update
sudo reboot

[manu85340]

@sdetweil Hi Stan, I’m happy to read you (every time I have problems :-)) here are the screenshots of what you asked me to do

[sdetweil]

@manu85340 fun

try this

pm2 stop all
cd ~/MagicMirror 
npm install electron@31.1.0

then npm start

[manu85340]

@sdetweil I’m stuck at this level

[manu85340]

@sdetweil

[sdetweil]

@manu85340 but what about npm start??

[manu85340]

@sdetweil I get this message when I run npm start

[sdetweil]

@manu85340 ok, show output of
uname -a

[manu85340]

@sdetweil

[sdetweil]

@manu85340 did you do the electron install I provided?

if so can you do it again and show me the output?

if you do all this over ssh, then you have text you can copy/paste instead of pics. which are hard to read

[manu85340]

@sdetweil ok sorry for the screenshots

pi@MagicMirror:~ $ pm2 stop all
[PM2] Applying action stopProcessId on app [all](ids: [ 0 ])
[PM2] [mm](0) ✓
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0  │ mm                 │ fork     │ 685  │ stopped   │ 0%       │ 0b       │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@MagicMirror:~ $ cd ~/MagicMirror
pi@MagicMirror:~/MagicMirror $ npm install electron@31.1.0
npm ERR! code EBADENGINE
npm ERR! engine Unsupported engine
npm ERR! engine Not compatible with your version of node/npm: magicmirror@2.28.0
npm ERR! notsup Not compatible with your version of node/npm: magicmirror@2.28.0
npm ERR! notsup Required: {"node":">=20"}
npm ERR! notsup Actual:   {"npm":"9.8.1","node":"v18.18.0"}

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-07                                                                                                                                                             -01T13_05_28_653Z-debug-0.log
pi@MagicMirror:~/MagicMirror $

[sdetweil]

@manu85340 ok, upgrade didn’t upgrade nodejs…

[sdetweil]

@manu85340 also show output of

lsb_release -a

bet it shows buster

[manu85340]

@sdetweil

pi@MagicMirror:~ $ lsb_release -a
No LSB modules are available.
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 10 (buster)
Release:        10
Codename:       buster
pi@MagicMirror:~ $

[manu85340]

@sdetweil do you need installers/update.log by email?

[sdetweil]

@manu85340 ok. script forces node 18 on buster. hang on. I’ll debug

could u give me output of command n
it might say unknown
or give a list