MM startup problem after update

manu85340

@sdetweil ok sorry for the screenshots

pi@MagicMirror:~ $ pm2 stop all
[PM2] Applying action stopProcessId on app [all](ids: [ 0 ])
[PM2] [mm](0) ✓
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0  │ mm                 │ fork     │ 685  │ stopped   │ 0%       │ 0b       │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@MagicMirror:~ $ cd ~/MagicMirror
pi@MagicMirror:~/MagicMirror $ npm install electron@31.1.0
npm ERR! code EBADENGINE
npm ERR! engine Unsupported engine
npm ERR! engine Not compatible with your version of node/npm: magicmirror@2.28.0
npm ERR! notsup Not compatible with your version of node/npm: magicmirror@2.28.0
npm ERR! notsup Required: {"node":">=20"}
npm ERR! notsup Actual:   {"npm":"9.8.1","node":"v18.18.0"}

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-07                                                                                                                                                             -01T13_05_28_653Z-debug-0.log
pi@MagicMirror:~/MagicMirror $

sdetweil

@manu85340 ok, upgrade didn’t upgrade nodejs…

sdetweil

@manu85340 also show output of

lsb_release -a

bet it shows buster

manu85340

@sdetweil

pi@MagicMirror:~ $ lsb_release -a
No LSB modules are available.
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 10 (buster)
Release:        10
Codename:       buster
pi@MagicMirror:~ $

manu85340

@sdetweil do you need installers/update.log by email?

sdetweil

@manu85340 ok. script forces node 18 on buster. hang on. I’ll debug

could u give me output of command n
it might say unknown
or give a list

manu85340

@sdetweil I typed “n” and there is nothing

sdetweil

@manu85340 ok,
do

sudo npm I-g n
sudo n 20

then node -v

manu85340

@sdetweil

pi@MagicMirror:~ $ sudo npm I-g n
Unknown command: "I-g"

To see a list of supported npm commands, run:
  npm help
pi@MagicMirror:~ $ sudo n 20
  installing : node-v20.15.0
       mkdir : /usr/local/n/versions/node/20.15.0
       fetch : https://nodejs.org/dist/v20.15.0/node-v20.15.0-linux-armv7l.tar.x                                                                                                                                                             z
     copying : node/20.15.0
node: /lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not foun                                                                                                                                                             d (required by node)
/usr/local/bin/node: /lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3                                                                                                                                                             .4.26' not found (required by /usr/local/bin/node)
   installed :  (with npm )
pi@MagicMirror:~ $ node -v
node: /lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not foun                                                                                                                                                             d (required by node)
pi@MagicMirror:~ $ node-v
-bash: node-v : commande introuvable
pi@MagicMirror:~ $ node -v
node: /lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not foun                                                                                                                                                             d (required by node)
pi@MagicMirror:~ $

sdetweil

@manu85340 grr… that was the problem finding the c++ lib for buster.

let me research, be a couple hours