[MMM-PIR-Sensor] Install failing

H3L1o150

@Mareus you tried run the install with “sudo” command?

Mareus

Yes i tried sudo, as well as npm install -g (also together with sudo).

kerijn

Installing with sudo worked for me. Thank you!

H3L1o150

@Bangee said in MMM-PIR-Sensor - White Screen:

ok so lets go step by step:
cd ~/MagicMirror/modules/

now we will remove the PIR folder:
rm -rf MMM-PIR-Sensor

and from here, we’re going to reinstall the MMM-PIR-Sensor modul:
git clone https://github.com/paviro/MMM-PIR-Sensor.git
cd MMM-PIR-Sensor

run the following cmd here:
npm install and wait, this can take a few minutes.

Now you’ll have to add pi to gpio
sudo useradd -g pi gpio

and reboot your Raspi:
sudo reboot

You’ll have to connect your PIR Sensor the right way with your Raspi.
I’ve connected my PIR Sensor on the following Pins:

I’ve got a Pi2 and use Pin 2 for power, Pin 6 for Ground and Pin 15 for Data.
– correctin grn pin

and dont forget to add the config :-)

Attempts to remove and install the module again as the user @Bangee said

Worked with me

kerijn

This post is deleted!

kerijn

@H3L1o150 @Bangee I am still having problems with the MMM-PIR-Sensor module. I added the default module to the config.js:

{
module: ‘MMM-PIR-Sensor’,
config: {
// See ‘Configuration options’ for more information.
}
},

When I then start the npm I get this error:

Starting MagicMirror: v2.1.0
Loading config …
Loading module helpers …
WARNING! Could not load config file. Starting with default configuration. Error found: Error: Module version mismatch. Expected 50, got 48.
Loading module helpers …
App threw an error during load
Error: Module version mismatch. Expected 50, got 48.
at Error (native)
at process.module.(anonymous function) [as dlopen] (ELECTRON_ASAR.js:173:20)
at Object.Module._extensions…node (module.js:583:18)
at Object.module.(anonymous function) [as .node] (ELECTRON_ASAR.js:173:20)
at Module.load (module.js:473:32)
at tryModuleLoad (module.js:432:12)
at Function.Module._load (module.js:424:3)
at Module.require (module.js:483:17)
at require (internal/module.js:20:19)
at bindings (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bindings/bindings.js:76:44)
Whoops! There was an uncaught exception…
Error: Module version mismatch. Expected 50, got 48.
at Error (native)
at process.module.(anonymous function) [as dlopen] (ELECTRON_ASAR.js:173:20)
at Object.Module._extensions…node (module.js:583:18)
at Object.module.(anonymous function) [as .node] (ELECTRON_ASAR.js:173:20)
at Module.load (module.js:473:32)
at tryModuleLoad (module.js:432:12)
at Function.Module._load (module.js:424:3)
at Module.require (module.js:483:17)
at require (internal/module.js:20:19)
at bindings (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bindings/bindings.js:76:44)
MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
Launching application.

When I leave the module out of the config.js everything works fine again. Any help is appreciated.

yawns

@kerijn `

cd ~/MagicMirror
npm list

look for electron to find out your version number

cd modules/MMM-PIR-Sensor
npm rebuild --runtime=electron --target=XXX --disturl=https://atom.io/download/atom-shell --build-from-source

Replace XXX with the version you found in step 1

fox

@yawns said in MMM-PIR-Sensor Install failing:

npm rebuild --runtime=electron --target=XXX --disturl=https://atom.io/download/atom-shell --build-from-source

Thank you @yawns .
I did your code lines and got:

npm ERR! peer dep missing: grunt@~0.4.0, required by grunt-yamllint@0.2.0

and

npm WARN prefer global node-gyp@3.5.0 should be installed with

Then i repeated

npm install

in pi@magicpi:~/MagicMirror/modules/MMM-PIR-Sensor $
and got againthis errors:

> Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall /home/pi/MagicMirror/modules/MMM-PIR-Sensor
> electron-rebuild -e ../../node_modules/electron-prebuilt

An unhandled error occurred inside electron-rebuild
Unable to find electron-prebuilt's version number, either install it or specify an explicit version

Error: Unable to find electron-prebuilt's version number, either install it or specify an explicit version
    at _callee$ (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:74:17)
    at tryCatch (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/babel-runtime/node_modules/regenerator-runtime/runtime.js:63:40)
    at GeneratorFunctionPrototype.invoke [as _invoke] (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/babel-runtime/node_modules/regenerator-runtime/runtime.js:337:22)
    at GeneratorFunctionPrototype.prototype.(anonymous function) [as next] (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/babel-runtime/node_modules/regenerator-runtime/runtime.js:96:21)
    at GeneratorFunctionPrototype.tryCatcher (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bluebird/js/release/util.js:16:23)
    at PromiseSpawn._promiseFulfilled (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bluebird/js/release/generators.js:97:49)
    at /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bluebird/js/release/generators.js:201:15
    at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:197:4)
    at Module._compile (module.js:570:32)
    at Object.Module._extensions..js (module.js:579:10)
    at Module.load (module.js:487:32)
    at tryModuleLoad (module.js:446:12)
    at Function.Module._load (module.js:438:3)
    at Module.runMain (module.js:604:10)
    at run (bootstrap_node.js:394:7)
    at startup (bootstrap_node.js:149:9)

npm ERR! Linux 4.4.38-v7+
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install"
npm ERR! node v6.9.4
npm ERR! npm  v4.1.1
npm ERR! code ELIFECYCLE
npm ERR! Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall: `electron-rebuild -e ../../node_modules/electron-prebuilt`
npm ERR! Exit status 255
npm ERR! 
npm ERR! Failed at the Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall script 'electron-rebuild -e ../../node_modules/electron-prebuilt'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the Magic-Mirror-Module-PIR-Sensor package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     electron-rebuild -e ../../node_modules/electron-prebuilt
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs Magic-Mirror-Module-PIR-Sensor
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls Magic-Mirror-Module-PIR-Sensor
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/MagicMirror/modules/MMM-PIR-Sensor/npm-debug.log

shashank

@nemesismega i am getting this error while install the PIR module, all other modules working fine

0_1485096342421_upload-2c90fe4e-9f32-4034-87e5-22eb559a82f2

fox

@shashank said in PIR-Sensor - put your mirror to sleep if not used:

@nemesismega i am getting this error while install the PIR module, all other modules working fine

i have nearly a similar problem: https://forum.magicmirror.builders/post/12024

kerijn

@yawns Thank you very much for your help but infortunately this didn’t work. I now cannot start Magicmirror anymore even without the MMM-PIR-Sensor module… See error below. I also got the same warning as @fox with missing grunt@…

pi@MyPi:~/MagicMirror $ npm start

> magicmirror@2.1.0 start /home/pi/MagicMirror
> electron js/electron.js


npm ERR! Linux 4.4.43-v7+
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "start"
npm ERR! node v6.9.4
npm ERR! npm  v3.10.10
npm ERR! code ELIFECYCLE
npm ERR! magicmirror@2.1.0 start: `electron js/electron.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the magicmirror@2.1.0 start script 'electron js/electron.js'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the magicmirror package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     electron js/electron.js
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs magicmirror
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls magicmirror
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/MagicMirror/npm-debug.log

kerijn

I now did a full new installation of MagicMirror with the defauls config.js and got the same error.

pi@MyPi:~/MagicMirror $ npm start

> magicmirror@2.1.0 start /home/pi/MagicMirror
> electron js/electron.js


npm ERR! Linux 4.4.43-v7+
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "start"
npm ERR! node v6.9.4
npm ERR! npm  v3.10.10
npm ERR! code ELIFECYCLE
npm ERR! magicmirror@2.1.0 start: `electron js/electron.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the magicmirror@2.1.0 start script 'electron js/electron.js'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the magicmirror package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     electron js/electron.js
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs magicmirror
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls magicmirror
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/MagicMirror/npm-debug.log

fox

@kerijn perhaps @paviro can help us here. It seems to be a general problem.

Jopyth

@kerijn @fox I think I fixed this issue before, it comes from the changes the Magic Mirror version 2.1.0 introduced. I am not sure, but I think the changes neccessary are almost as simple as here. Will have to test this at home though. Maybe there was something else needed.

fox

@Jopyth said in MMM-PIR-Sensor Install failing:

@kerijn @fox I think I fixed this issue before, it comes from the changes the Magic Mirror version 2.1.0 introduced. I am not sure, but I think the changes neccessary are almost as simple as here. Will have to test this at home though. Maybe there was something else needed.

Thank you. That fixes the problem for me ! :)

kerijn

@Jopyth This worked for me for the installation as well. Thank you! However, the sensor does not seem to do anything. How can I check whether the sensor is working properly?

Makradon

@kerijn said in [MMM-PIR-Sensor] Install failing:

@Jopyth This worked for me for the installation as well. Thank you! However, the sensor does not seem to do anything. How can I check whether the sensor is working properly?

I have the same problem

Jopyth

@Makradon @kerijn I found this. I think you could save this as test.py somewhere on your Pi and see if the output changes when you move and don’t move (set the pin number in the second line) after your start it with python test.py:

import RPi.GPIO as GPIO
pin = 11
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BOARD)
GPIO.setup(pin, GPIO.IN)         #Read output from PIR motion sensor

while True:
       i=GPIO.input(pin)
       if i==0:                 #When output from motion sensor is LOW
             print "No intruders",i
             time.sleep(0.1)
       elif i==1:               #When output from motion sensor is HIGH
             print "Intruder detected",i
             time.sleep(0.1)

thoimi

@Jopyth I had the same problem.
Your work-around (installation) worked for me but the sensor does not seem to do anything…
the test.py script shows me always “1” - also when nothing is moving in the room…

Jopyth

@thoimi Check for the correct wiring (PIN-Numbers can be confusing, there is the BCM numbering and the other one), also make sure GND and 5V are conncted correctly, adjust sensitivity to maximum and time to minimum (so it hopefully switch back and forth quickly), try covering up the sensor under a bowl or something and then put your hand in to test.

When I set up the sensor, I also searched for the error for hours, and at the end my problem was the sensor was plugged into pin 4 (BCM) and not 7 as I thought. Also I think you need to remove the , pull_up_down=GPIO.PUD_DOWN part (PIR example).