MMM-PublicTransportHafas - Error when loading - DeparturFetcher.mjs

Volkae

@sdetweil
I used your upgrade script, update is completed, made an new install from MMM-PublicTransportHafas but it does not work

sdetweil

@Volkae ok, did you do the apply ?

do

node -v
cd ~/MagicMirror 
grep version package.json

MagicMirror version should be 2.31.0

sdetweil

@p1lspeda just fyi, if you use the upgrade script it will npm install all the modules that have a package.json with dependencies after completing the MagicMirror upgrade

sdetweil

@Volkae @p1lspeda @KristjanESPERANTO will have to advise next steps

KristjanESPERANTO

@sdetweil said in MMM-PublicTransportHafas - Error when loading - DeparturFetcher.mjs:

@Volkae @p1lspeda @KristjanESPERANTO will have to advise next steps

I need the system information part from the logs. Like this:

[2025-01-14 20:05:03.529] [INFO]  System information:
### SYSTEM:    manufacturer: Raspberry Pi Foundation; model: Raspberry Pi 4 Model B Rev 1.5; virtual: false
### OS:        platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.1.21-v8+
### VERSIONS:  electron: 31.2.1; used node: 20.15.0; installed node: 22.4.1; npm: 10.8.1; pm2:
### OTHER:     timeZone: Europe/Berlin; ELECTRON_ENABLE_GPU: undefined

p1lspeda

@KristjanESPERANTO said in MMM-PublicTransportHafas - Error when loading - DeparturFetcher.mjs:

Here you go

[2025-05-06 06:46:30.229] [INFO]  System information:
### SYSTEM:   manufacturer: ; model: ; virtual: false
### OS:       platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.12.20+rpt-rpi-v8
### VERSIONS: electron: 32.2.7; used node: 22.14.0; installed node: 22.14.0; npm: 10.9.2; pm2: 5.4.3
### OTHER:    timeZone: Europe/Berlin; ELECTRON_ENABLE_GPU: undefined

Volkae

@sdetweil said in MMM-PublicTransportHafas - Error when loading - DeparturFetcher.mjs:

node -v
cd ~/MagicMirror
grep version package.json

22.14.0
“version”: “2.30.0”,

Volkae

@KristjanESPERANTO said in MMM-PublicTransportHafas - Error when loading - DeparturFetcher.mjs:

@sdetweil said in MMM-PublicTransportHafas - Error when loading - DeparturFetcher.mjs:

@Volkae @p1lspeda @KristjanESPERANTO will have to advise next steps

I need the system information part from the logs. Like this:
[2025-01-14 20:05:03.529] [INFO]  System information:
### SYSTEM:    manufacturer: Raspberry Pi Foundation; model: Raspberry Pi 4 Model B Rev 1.5; virtual: false
### OS:        platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.1.21-v8+
### VERSIONS:  electron: 31.2.1; used node: 20.15.0; installed node: 22.4.1; npm: 10.8.1; pm2:
### OTHER:     timeZone: Europe/Berlin; ELECTRON_ENABLE_GPU: undefined

Sorry, but I am not sure how to see this informations

KristjanESPERANTO

@Volkae said in MMM-PublicTransportHafas - Error when loading - DeparturFetcher.mjs:

“version”: “2.30.0”,

You need to update MagicMirror. The module doesn’t work anymore with MagicMirror version 2.30.0.

sdetweil

@Volkae that means the upgrade didn’t execute
copy/paste and execute this in a terminal window on the MagicMirror system

bash -c  "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)"  apply

p1lspeda

@p1lspeda said in MMM-PublicTransportHafas - Error when loading - DeparturFetcher.mjs:

@KristjanESPERANTO said in MMM-PublicTransportHafas - Error when loading - DeparturFetcher.mjs:

Here you go

[2025-05-06 06:46:30.229] [INFO]  System information:
### SYSTEM:   manufacturer: ; model: ; virtual: false
### OS:       platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.12.20+rpt-rpi-v8
### VERSIONS: electron: 32.2.7; used node: 22.14.0; installed node: 22.14.0; npm: 10.9.2; pm2: 5.4.3
### OTHER:    timeZone: Europe/Berlin; ELECTRON_ENABLE_GPU: undefined

Although it is not listed, I am running a Raspberry Pi 4

pi@magicmirror:~ $ lscpu
Architecture:             aarch64
  CPU op-mode(s):         32-bit, 64-bit
  Byte Order:             Little Endian
CPU(s):                   4
  On-line CPU(s) list:    0-3
Vendor ID:                ARM
  Model name:             Cortex-A72
    Model:                3
    Thread(s) per core:   1
    Core(s) per cluster:  4
    Socket(s):            -
    Cluster(s):           1
    Stepping:             r0p3
    CPU(s) scaling MHz:   50%
    CPU max MHz:          1800.0000
    CPU min MHz:          600.0000
    BogoMIPS:             108.00
    Flags:                fp asimd evtstrm crc32 cpuid
Caches (sum of all):
  L1d:                    128 KiB (4 instances)
  L1i:                    192 KiB (4 instances)
  L2:                     1 MiB (1 instance)
NUMA:
  NUMA node(s):           1
  NUMA node0 CPU(s):      0-3
Vulnerabilities:
  Gather data sampling:   Not affected
  Itlb multihit:          Not affected
  L1tf:                   Not affected
  Mds:                    Not affected
  Meltdown:               Not affected
  Mmio stale data:        Not affected
  Reg file data sampling: Not affected
  Retbleed:               Not affected
  Spec rstack overflow:   Not affected
  Spec store bypass:      Vulnerable
  Spectre v1:             Mitigation; __user pointer sanitization
  Spectre v2:             Vulnerable
  Srbds:                  Not affected
  Tsx async abort:        Not affected

sdetweil

@p1lspeda have you tried the upgrade script?
I believe the module requires 2.31.0 as a minimum MM version now

KristjanESPERANTO

@p1lspeda said in MMM-PublicTransportHafas - Error when loading - DeparturFetcher.mjs:

### VERSIONS: electron: 32.2.7; used node: 22.14.0; installed node: 22.14.0; npm: 10.9.2; pm2: 5.4.3

You still need to upgrade MagicMirror. I recommend the official upgrade process.

Volkae

I used the update script again and now MM is 2.31.0
MMM-PublicTransportHafas works again, that`s fine, but now MMM-SmartWebDisplay is gone…
Not fine…

sdetweil

@Volkae any errors listed in MagicMirror startup?

Volkae

@sdetweil
Sorry, I don`t know how to show the errors during startup :-(

sdetweil

@Volkae where does npm start output

if using pm2 tge

pm2 logs --lines=xxx

xxx is the number of most recent lines
default 15

probably 100 good start
note the output comes in 2 parts

error and output

Volkae

@sdetweil
Not using pm2
using cronjob to start MM

sdetweil

@Volkae i forgot to mention that the full calendar url
is shown
i have deleted the other message

Volkae

@sdetweil
Upps,
thank you!!!