MMM-voice

strawberry 3.141

@Mykle1 just set the config to microphone: 1

Mykle1

just set the config to microphone: 1

I guess I should have mentioned that I already have that setting. I was tired. Does this mean that microphone is not compatible?

strawberry 3.141

@Mykle1 if you want i can have a look via remote desktop session

Mykle1

@strawberry-3.141 said in MMM-voice:

if you want i can have a look via remote desktop session

That would be great but I have to run to work for a few hours. I’ll be back in about 4 hours. So, perhaps later if you are available. I’d appreciate that.

Mykle1

I’m here for a while if you should come around

Mykle1

@strawberry-3.141

I tested my microphone on the Pi by doing this:

pi@Pi3:~ $ arecord -D plughw:1,0 test.wav
Recording WAVE 'test.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono
^CAborted by signal Interrupt...
pi@Pi3:~ $

That gave me this:

Which sounds ok. Clear, and not too much white noise.

As long as my Audio Device Settings looks like this:

I am not in debug mode

{
     			module: 'MMM-voice',
     			position: 'top_right',
     			config: {
         		microphone: 1,
			keyword: 'MAGIC MIRROR', // UPPERCASE ONLY
			timeout: 15
     		}
 		},

However, I am getting this:

At least we got it working

strawberry 3.141

@Mykle1 the second line is in debug mode only

Mykle1

@strawberry-3.141 said in MMM-voice:

the second line is in debug mode only

So, can I remove that from showing?

strawberry 3.141

@Mykle1 it shouldn’t be there when you not added debug flag in the config

Mykle1

@strawberry-3.141

I’ll try debug: false and see what happens

Mykle1

@strawberry-3.141

You’re right again. I had config.js opened twice. One with debug and one without. I removed debug and saved and closed both. Now it’s fine. One last thing, if you don’t mind, I’d like to align everything in MMM-voice to the right margin. Please and thank you. :thumbsup_tone1:

Mykle1

@strawberry-3.141 Oh, and I can change the 'MAGIC MIRROR" activation phrase to something else?

strawberry 3.141

@Mykle1 yes you can change it, that’s why it is configurable. try to apply the rule text-align: right; in custom.css

Mykle1

@strawberry-3.141 said in MMM-voice:

yes you can change it, that’s why it is configurable. try to apply the rule text-align: right; in custom.css

I will endeavor to try, thanks for your help

Mykle1

@strawberry-3.141 said in MMM-voice:

try to apply the rule text-align: right; in custom.css

I tried:

.MMM-voice {
  text-align: right;
}

and

.region.top.right .MMM-voice {
  text-align: right;
}

Nothing happened
At least the module seems stable and it’s working. :thumbsup_tone1:

Mykle1

@strawberry-3.141 said in MMM-voice:

try to apply the rule text-align: right; in custom.css

I don’t mind trying to get it to work but can you give me another hint? Am I close? haha!

strawberry 3.141

@Mykle1 you have to either override the class align-left which is getting confuse or set an important flag

.MMM-voice .align-left {
  text-align: right;
}

.MMM-voice {
  text-align: right !important;
}

Mykle1

@strawberry-3.141 said in MMM-voice:

you have to either override the class align-left which is getting confuse or set an important flag

Ohhh, I was so close! Thank you again :thumbsup_tone1:

c.keen

Hi guys,
I would like to control my mirror by using MMM-voice. The installation was quite easy. But now, the icon on the mirror gives an “ERROR” after the microphone has been initialised. I have read the whole thread and tried a few options but none of them worked. Reading the error.log it gives only “127”. Reading the debug.log it says: “pocketsphinx_continuous:: error while loading shared libraries: libpocketsphinx.so.3: cannot open shared object file: No such directory”.

At first I thought that not all dependencies have been installed correctly althought the installer did not give any warnings or errors. So I thought the I have to install pocketsphinx_continuous and lmtool myself but found them in the node_modules folder.
Can you please help me?

strawberry 3.141

@c.keen do you have an entry in your bashrc file at the bottom?