Magic Mirror on the Raspberry Pi 1, agonizingly difficult

A Former User

Go to your MagicMirror directory.
Is there package.json file in your MagicMirror directory? (..../MagicMirror/package.json)
If there is, open package.json you can see like this.

...
  "dependencies": {
    "body-parser": "^1.17.1",
    "colors": "^1.1.2",
    "electron": "^1.4.7",
    "express": "^4.14.0",
    "express-ipfilter": "latest",
    "feedme": "latest",
 ...
  }
}

Then, you can run npm install in /MagicMirror directory.
See how it goes.

MMRPi1

I’ve got a progress bar that’s progressing slowly, hopefully it will work, though it ma take a while.
Updates to follow…

A Former User

@MMRPi1 good luck to you. :D

MMRPi1

Alright, it says Magic Mirror installation was successful, but I’m not sure what to do next…

MMRPi1

It worked!!
Thank you to everyone :-D
Now all that’s left is screensaver, autostart and all that…
Thanks again!

cowboysdude

@MMRPi1 Thank you for your patience! :) Glad you got it running now some advice…

IF you have a working config before you make ANY changes to it copy it to config.bak that way you’ll always have a GOOD working config file…

Good Luck!

Mykle1

@cowboysdude said in Magic Mirror on the Raspberry Pi 1, agonizingly difficult:

IF you have a working config before you make ANY changes to it copy it to config.bak that way you’ll always have a GOOD working config file…

This is excellent advice!

MMRPi1

@cowboysdude Thanks.
This is the situation:
The default config file is working (I have it backed up) though when I run it in server only the clock and weather work fine, but all the other modules say “Loading…”.
I did try to customise it, but got the “No config file”, so either I have syntax errors or the sources aren’t right…
Talking of, does anyone know of a list of compatible news feeds and the like?
Thanks again

A Former User

@MMRPi1
Can you show your config.js here? It makes easier.
If you got “no config file” however you have a confidence for config.js existence, you might make some syntax error in your config.js.

you can find newsfeed rss in most news sites.
If some site has links of “RSS”(or small orange squared antenna icon), you can use that url to your newsfeed.
By example, If you want to get news from “The Washington Post”, google “washington post rss”. Then the result pages direct you to WP rss page. get a link what you want, apply that to your news-feed module config.
Most of the RSS could be compatible with that module. Even RSS of personal blogs also.

Some browsers(Firefox, IE7…) support finding RSS on current page. You can see RSS mark in addressbar if current page has valid RSS link.

You can check the reference. (I doubt there are some missing links.)
https://www.repeatserver.com/RSSFeedList.aspx
http://www.uen.org/feeds/lists.shtml

MMRPi1

Good news!
The config file is (mostly) working (it needed a reboot) and I’ll configure it until I’m satisfied at which point I need to figure out how to keep it fullscreen, disable screen timeout and do the autostart and all that…
In the meantime, thanks to everyone for their help :-D