MMM-NOAA - Another Weather Module

pjkoeleman

Nystro0m

@cowboysdude
I got a error after the update with following:

/home/pi/MagicMirror/modules/MMM-NOAA/MMM-NOAA.js:399
=======
^^^
SyntaxError: Unexpected token ===

I removed the ====== on line 399 with success to get the module working.

Im not sure if this is just on my side, im still new to this. But i thought it could good to be shared.

Edit: This could make a problem with updating the the module. I experience the clock getting stuck from time to time.

pjkoeleman

@Nystro0m
Looks to me that there is two times the same code in the js-file ecxept for the language settings. So @cowboysdude has to look into this.

Mykle1

@pjkoeleman said in MMM-NOAA - Another Weather Module:

So @cowboysdude has to look into this.

He’s doing a roofing job in 90° heat at the moment. On a Sunday! Who does that?

I’m sure he’ll fix it as soon as possible. That’s what he does.

cowboysdude

@Nystro0m and @pjkoeleman

Thank you both!!! IT was doubled, not sure how that happened but all fixed!! :)

Johans

installed module last night, settings all according the help file, but nothing is displayed.
Switched back to the wunderground module, that’s working fine.
any idea. I suppose that when the API key is working with the Wunderground module it should work with yours too.

what information do i need to provide for further investigation - also tell me how to get that. (I’m newbee - sorry for this - i’m in a learning process )
(language was set to “nl” and then changed again to “en”).
And I see module is loaded, but not displayed.

cowboysdude

@Johans check the console log and see what that tells you when it’s loading…

You need to start your mirror and hit the ‘ALT’ key there will be a menu at the top…you want ‘toggle developer…’

That’ll open up a side panel on the right and it will tell you what error there is…let me know so I can help you fix it :)

Nystro0m

@Johans
Im running on a Raspberry pi B ver.1 and it have some problems loading information from time to time when it been pushed to far.
I would make sure that it is no error in the console from NOAA or other modules:
Either by Comwboysdude method, but you could also run: “npm start dev” when starting MagicMirror.
Another way that i did find more speed efficient is to open the MagicMirror interface on a secondary computer by going to: “Your.PI.LocalIP:8080/”.
And then right-click and choose “inspect” in Chrome. Here you can find the console.

Make sure to have your WhitelistIP set properly.

I could also recommend Jophys - Remote Control Module.
With this you can restart you MagicMirror, enter the web interface and such remotely if you are not comfortable with ssh.

Johans

@Nystro0m
thanks, learned again something new, on how to remotely connect to the MagicMirror.
Meanwhile problem is solved.

removed the line 400.
these chars created an error ==========

Johans

@cowboysdude

thanks for showing me how to track & trace errors.
Found root cause - line 400 in module MMM-NOAA.js.
I removed the =========.

Also added the “nl”: “nl-NL” into the lang file section.

So now it’s all working - and in dutch - makes my wife happy :).
Very beautifull - thanks for you support.