pm2 doesn't start after mm update

[A Former User]

@kurt
try pm2 log mm
and

cd ~/MagicMirror
npm start dev

What can you see in terminal and browser (and additional dev console window)?

[kurt]

@Sean
hi Sean thank you for your quick response
this is what I get

0|mm       |  Please include the following file with any support request:
0|mm       | npm ERR!     /home/pi/MagicMirror/npm-debug.log

npm ERR! Linux 4.9.53-v7+
npm ERR! argv "/usr/bin/node" "/usr/bin/npm" "start" "dev"
npm ERR! node v6.11.4
npm ERR! npm  v3.10.10
npm ERR! code ELIFECYCLE
npm ERR! magicmirror@2.1.3 start: `sh run-start.sh "dev"`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the magicmirror@2.1.3 start script 'sh run-start.sh "dev"'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the magicmirror package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     sh run-start.sh "dev"
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs magicmirror
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls magicmirror
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/MagicMirror/npm-debug.log
pi@raspberrypi:~/MagicMirror $ 

[A Former User]

https://forum.magicmirror.builders/topic/636/npm-start-dev?page=1
I think this could be help.

[kurt]

@Sean
well thank you for the link, but I could’t find a simple solution for my problem. The mirror doesn’t start also if I do the

DISPLAY=:0 npm start

by VNC

[A Former User]

This post is deleted!

[kurt]

@kurt
Hi memebers
anyone else has an idea to get my mirror back on the screen again?
It’s frustrating for me, because the mirror with all the modules was running like a charm, but after that update …
Thank you

[Mykle1]

@kurt said in pm2 doesn’t start after mm update:

anyone else has an idea to get my mirror back on the screen again?

Until you can fix your updated installation, you can rename your MagicMirror folder and manually install the version of MM that was working for you. At least you’ll have your mirror back

[kurt]

@Mykle1
thank you Mykle1, sounds for me as it is a weekend job.
To get things right: first thing is to rename the MagicMirror folder.
Second step is to go thru the install routine https://forum.magicmirror.builders/topic/236/complete-setup-tutorial
Is it than possible to copy/paste the modul-folders from the renamed (old)MMfolder into the new one and and the old config.file?
I read your help in https://forum.magicmirror.builders/topic/5081/mm-wont-start-after-install/2
but I guess this is a different problem.
Thank you

[lavolp3]

Hi Kurt,

if I understand correctly your mirror doesn’t show up despite your pm2 “starting” it successfully!?

the run-start.sh shell script seems to be the problem.
This is the content:

if [ -z "$DISPLAY" ]; then #If not set DISPLAY is SSH remote or tty
	export DISPLAY=:0 # Set by defaul display
fi
electron js/electron.js $1

I would assume electron has some problem starting…

[kurt]

@lavolp3
Hi lavolp3
Bevor the update, pm2 startet the mirror, by now nothing happens at all, even no black screen etc.
do you know a way to heal the mirror?
Thanks