ipWhitelist - still not working

[binderth]

I’m using MM2 (latest) with pm2.
in my config.js I tried everything, even this latest one:

var config = {
	port: 8080,

	language: 'de',
	timeFormat: 24,
	units: 'metric',
	ipWhitelist: [], 

in startup I get this in the log:

(...)
All module helpers loaded.
Starting server on port 8080 ... 
You're using a full whitelist configuration to allow for all IPs
Server started ...
(...)

I have no iptables in place:

pi@MagicMirror2:~ $ sudo iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
pi@MagicMirror2:~ $ 

stil, if I try to reach the MagicMirror from my Laptop, I see the connection refused message:

I can reach the Pi without problems on SSH-port and even send him MQTT-updates. So I assume, there’s no issue with iptables (as seen above, it’s all open).
Is there anywhere, I can have a look on to solve this?

[binderth]

oh. not exactly. After some time now, it works! Don’t know, what it took some time, aber now it works!

[A Former User]

@binderth
Try 0.0.0.0/0 for IpWhiteList.

[binderth]

@Sean said in ipWhitelist - still not working:

0.0.0.0/0

same error on the Laptop.
Still no change with the netstat:

pi@MagicMirror2:~ $ sudo netstat -lnpt
Aktive Internetverbindungen (Nur Server)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      441/sshd
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      462/mosquitto
tcp        0      0 0.0.0.0:5900            0.0.0.0:*               LISTEN      490/vncserver-x11-c
tcp        0      0 127.0.0.1:8080          0.0.0.0:*               LISTEN      909/electron.js

[Mykle1]

@binderth

Add address: "0.0.0.0", to your config, outside your whitelist:

var config = {
    port: 8080,
    address: "0.0.0.0",
    ipWhitelist: [], // Set [] to allow all IP addresses.
    language: "en",
    timeFormat: 12,
    units: "imperial",

[binderth]

@Mykle1 no Change here… :(

[binderth]

oh. not exactly. After some time now, it works! Don’t know, what it took some time, aber now it works!

[schlachtkreuzer6]

@Mykle1 THAAANKS! ;) run in the same issue after the latest update

[Mykle1]

@schlachtkreuzer6 said in ipWhitelist - still not working:

@Mykle1 THAAANKS! ;) run in the same issue after the latest update

You’re welcome, mate! Enjoy!

[SimtechBen]

@Mykle1 Thank you! This fixed a problem I was having with openHAB sending sendHttpGetRequest.

[Mykle1]

@SimtechBen

Nice!